Everytime i take a shot with my camera and look at the pictures it says file error and the picture is fuzzy and like in different colours sometimes. ive tried reseting and formatting but it hasnt done anything, my camera is brand new bought like 3 weeks ago.
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: samsung s1050 says file error
Are you able to transfer the images to the computer? It looks like a memory stick problem.. If your camera has internal memory then pull out the memory stick and save images to internal memory.. If the pictures are alright then you have to replace the memory card.. Do not buy them on ebay. 60% of the times you get fake stuff over there..
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to an Expert (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I got the same problem when I rotated a picture on my camera using my computer and then tried to view it using the camera. after some research I got to know that cameras can't read a picture after it has been edited out of the camera.
You would also get this message if the memory card is damaged following extensive use (which is quite natural with flash memory) in which case you would have to buy a new card.
1/ Turn off the Camera
2/ Remove the memory card
3/ Clean it with a piece of clothe and a little alcohol
4/ Install the memory card and turn on your Camera.
Also make sure that there is still space on your memory card. Otherwise delete some unnecessary pictures.
If the above steps do not work, back up all the files on your memory card to a computer, then using the camera, format the memory card.
Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.
Sounds like you may never formatted the memory card in your camera. This is important to setup the needed file handling structure for the camera to use. Insert the card in the camera, and format it IN THE CAMERA using its format feature located in the menus. Note that this will also totally erase the cvard, so only do this if you have recovered or backed up the pictures from the card. If the pictures can't be accessed normally, use recovery software.