Question about AMD AOpen KT333 AK77333U (MBAOAK77333U) Motherboard

1 Answer

No disply - AMD AOpen KT333 AK77333U (MBAOAK77333U) Motherboard

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Disconnect the video cable ( blue or white colored cable with screws on the side ) from the monitor and see if you get something on the screen, anything at all like a colored bar moving up and down or a message stating no signal input. If u get this the monitor is fine, if not the monitor is bad.
If the monitor is fine that means the video card inside the system is bad and you will have to replace the video card if it is an expansion card or u will have to change the motherboard if the video card is embedded on to it.

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cpu is front light on but not go to disply powr fan is ok runing but not show the disply plz help me any on


check the display monitor cord to CPU if attached perfectly/check on off switch of display screen

Feb 23, 2015 | Computers & Internet

2 Answers

Gigaset a495 showing Register HS, and i cant making call.. plz give me a solution


gigaser A495 Handset ,
Actualy one problem may Handset Disply not work,Pls reply how to work in incoming and disply screen number.

Aug 18, 2012 | Siemens Gigaset A495 Cordless Phone

1 Answer

I have use a mobile nokia 6630 but actully on mobile and no disply plesed saj what is the problem , disply , are disply (ic). mobile on uswe the mobile is the cotin working but no disply


Hello,

The problem is from the ribbon that attach the screen to the main board of the phone, it is not properly connected that is why you do not have display. If the phone should have fallen, then the screen might be faulty. If it did not fall from you, then it means the ribbon of the screen is disconnected from the phone.

First, try to flash the phone, then you open it up carefully. And sit the ribbon that links the screen to the main panel of the phone properly.

And if that does not help, then you need to replace the screen of the phone.

Take care

Oct 13, 2010 | Cell Phones

1 Answer

My 5130 mobile disply damaged now its displying vertical and reversible letter displying what i do my mobile warrenty is over


when i turn on my fone, the screen remains blank but i am still able to press buttons into it. can you help?

Oct 03, 2010 | Nokia 5130 Cellular Phone

1 Answer

Viore 7 tv no picture and tv disply


it is possibly you have put it into Cable mode or Video mode or even channel 3. also check and see if the remote has vcr/tv or tv/video you might have pressed this and that is why your tv is blank.

Feb 11, 2010 | Televison & Video

1 Answer

Delete divert on disply


use ##002# to cancell all divert. This will work only in GSM networks.

Oct 13, 2009 | Cell Phones

1 Answer

Error code 001. On/off switch trips off after 10 seconds


when you open the front door you,ll find under the disply a smal hole put eny nail in it a doller sign will apeer in the upper left corner of the disply pres
star , 4,star you will see another disply press the right arrow till you find error word press on it and then press star (astresk. the disply will turn off and on again theis error might be from the heater lamp if
it comes again change the hamps

May 08, 2009 | Canon NP 6545 Copier

3 Answers

China mobile display problem


Disply problem in my china mobile TOP-1 (Super Music King). I have srcreen pin touch mobile. its working on all functions in mobile disply power is on. but disply not showing any function on mobile no. on screen. please help me. how i can solve this problem chsfoods@rediffmail.com

Sep 14, 2008 | Handmark Software MobileLists (950142) for...

3 Answers

Nokia 6680 nodiplay


(1) cleen disply conecter
(2) change disply fhilter

Nov 09, 2007 | Nokia 6680 Cellular Phone

Not finding what you are looking for?
AMD AOpen KT333 AK77333U (MBAOAK77333U) Motherboard Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top AMD Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

778 Answers

rafnix
rafnix

Level 2 Expert

108 Answers

Are you an AMD Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...