Question about Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

1 Answer

There is now an electrical smell

I tried your suggestion re. manual filling with water. This did not work.
There is now an electricial smell. I have stopped the machine and turned off the main switch. I think this could be a big problem.
Many thanks for your help.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

Can't see what your original problem was but the electrical smell could be the power connection in the junction box in the bottom of the dishwasher. I have had several burn the wires here.
Also, not sure of the age of d'washer. some of the older ones had an issue where the wires come up into the door. look at the harness where it goes thru the bottom of the door.

Posted on May 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Partner put diesel in the water inlet. How do I fix this please.


Hope you did not put too much Derv into the water tank, you will need to remove the tank & the inlet pipe clean it all out with hot plenty of soapy water until you got rid of the smell & any black marks in the fill pipe. I hope you can get rid of the smell & use everything again, otherwise you'll need to buy everything new again & fit it. If your able if not you will need to take to service centre! but try what I have suggested you can't lose anything by trying. Cheers, Malcolm Campbell.

Apr 07, 2017 | Fiat Cars & Trucks

1 Answer

What is causing the bad electric smell from my dishwasher?


Hello,

one or more components is burnt on the board of the unit. Or there might be a bridge of wire which is causing the smell....

Jan 05, 2012 | GE Dishwashers

1 Answer

I forgot to place lint filter in dryer, dryer sheet got sucked in, dryer made huge clanking sound, stopped working, still had electricy, burnt smell near dryer


It sounds like the sheet was pulled into the fan of the blower. You may need to take the dryer apart to remove it. If you can still see the sheet then you can try pulling it out but I would turn off the breaker or unplug the dryer before doing that.

Nov 14, 2010 | LG DLE2516 Electric Dryer

1 Answer

No water running through cycle once filled....making humming noise once clicks into cycle


pump should be checked for restriction of movement,is there something blocking it?does the capacitor smell?if it does its blown(or meter check-more accurate),hope this helps

May 27, 2009 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Electrical Burning smell when agitating, trips breaker.


Send your complete model number, just to make sure we are working on same washer.
First check the lid latch switch by unplugging washer first and remove the font panel. Look up to where the switch is mounted. I am not positive that is your [problem but know there has been many problem with that switch. It will begin to melt ad cause the power to motor to be lost in a bad connection.

Mar 24, 2009 | Kenmore Washing Machines

1 Answer

No wash cycle activation


This was mistakenly entered as a frontloader. Should have been a top loader. Sorry

Dec 07, 2008 | Kenmore 43142 Front Load Washer

1 Answer

Kenmore Washer Won't Drain


yes, check the drain, could be clogged, or check the water pump assembly as well, the clothe could be stuck in the impeller.

the burning smell could be coming from a separate electric water pump and it can not turn that is why it is burning already.


tnx 4 using fixya,

drcool

Oct 07, 2008 | Washing Machines

2 Answers

Washer hums on rinse cycle


It sounds as if you are using WARM water for the wash cycle since your complaint begins with the rinse cycle. The rinse cycle generally uses COLD water, so I must deduce that your washer is not filling up for the rinse cycle. The humming sound is likely coming from the fill valve being starved for cold water.
Investigate your cold water supply to the washer and if you have good supply, you may want to replace the fill valve.

Let me know what you find...Thanks for contacting FIXYA.com

May 27, 2008 | Amana NAV8805EWW 3.3 Cu. Ft. Elustra Tub...

3 Answers

Espresso side works, Coffee side doesn't


I talked to a service tech who suggested that it was a fuse.  Now I am trying to find a way to replace the fuse.

Oct 14, 2007 | DeLonghi Caffe Nabucco BCO70...

Not finding what you are looking for?
Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...