Question about Tissot T-Touch T33159851 Wrist Watch

9 Answers

Hi, New battery in my T-Touch & reset, Thermo, Alt, Meteo problem

Hi, Ive put a new battery in my Touch (CR2032) & reset my Tissot Touch Expert TI & I still don't see the Thermo, Meteo or Altimeter on the display, blank... although I did see the meteo for a couple of seconds, but no longer, Thank You! Help!

Posted by on

  • 4 more comments 
  • Mark Hindle
    Mark Hindle May 03, 2010

    Hi, thank you for your speedy reply, I've read your comments prior to joining 'FixYa' & that solution still doesn't work. I have reset with the bendy switch while pressing the middle button, the reset was successful. I don't really want to contact Tissot just to change a battery as this will cost £50+, but I may end up doing as ive tried everthing... Thanks Mark

  • Mark Hindle
    Mark Hindle May 03, 2010

    Hi & Thanks for the input. Why does the Alarm, Compass & Chrono still work fine? I have successfully Calibirated the Compass also? They must be related? Thank You. Mark

  • Mark Hindle
    Mark Hindle May 10, 2010

    These solutions have not worked. Thank You anyhow.

    Mark

  • Mark Hindle
    Mark Hindle May 11, 2010

    Thank you, tried this & still doesn't work, Thank you for your help.

  • Mark Hindle
    Mark Hindle May 11, 2010

    Thank you, this doesn't work, it must be knackered! Mark

  • Mark Hindle
    Mark Hindle May 11, 2010

    Can I have my money back pls as there is no solutions\answers to my problemo.... Mark

×

Ad

9 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 107 Answers

Altright is website about latest headlines, from the alternative right community http://www.altright.com visi us and see
the rirght!

Posted on Aug 17, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

To get your mony back you need to send an email to premium.support@fixya.com Please allow 3 to 4 days to get a reply. Or you can call 888-693-4992

Posted on May 11, 2010

  • Mark Hindle
    Mark Hindle May 11, 2010

    Thank You!

    Mark

  • Jyackle5
    Jyackle5 May 11, 2010

    Is there any thing else I can help you with. Sorry we could not get the watch working for you.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

Did you check the batteries for voltage. Its possible you bought a bad battery. Touch both sides with a digital meter.

Posted on May 11, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 415 Answers

Remove the battery and use a clean pencil erasor to carefully rub all battery contact points.....then use a vacuum attachment to ensure you have removed all erasor debris. Re-insert the battery and see if it works. If not, something is wrong internally which will require service from the manufacturer.
I hope you find this information to be very helpful to you moving forward. :-)

Posted on May 10, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 229 Answers

Remove the battery and confirm the voltage of 3V. It could be a defective new battery. From your descriptions I believe your battery is weak. Good luck let me know how it goes.

Posted on May 04, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 787 Answers

They are independent systems, that's why some work and some don't. Besides using the same battery, there aren't many other similarities.

Posted on May 04, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,049 Answers

I'll be honest, I'm not sure. The easiest thing is to do with things like this are to send them in for a warranty repair. But I may be able to help you if this isn't an option. First, if you don't have the manual you can view it here. I've also included a breakout of the functions below.

Hi, New battery in my T-Touch & reset, Thermo, - cfa772d.jpg
If you reset the watch you have to set the touch mode and zone information before certain features will work:

  1. The Altimeter and compass with only display in touch mode and only for 30 seconds. Other options in touch mode display for 15 seconds.
  2. These will not display if you do not set the Hemisphere and Climate zone, instructions are on page 5/13 of the above manual

Posted on May 03, 2010

  • NA NA
    NA NA May 03, 2010

    Compass, Alarm, and Time do not require the Zone information to be configured. The other features do. I can only assume that something in how the altitude sensor works varried from the northern to the southern hemisphere. (...maybe it's like how toilet water flushed in two different directions.) See if setting this up helps, it only takes a minute.

    Keep in mind even after the zone is set that the altimeter will still
    require adjustment every few days or whenever there's a
    weather change. Select the altimeter, hold the upper or lower button
    until you have the correct altimeter reading for where you are and it
    will hold for a few days.

    If that doesn't work...RESET the watch again, and set time again. You may have only had a partial reset.

    If it still doesn't work something is broken in the watch, since the electronics are all one integrated component; there isn't really anything you can do but have the watch serviced.





×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,469 Answers

Hi,

when a watch display blank screen, Means the screen board is getting weak.

In this process you will need to service the watch for it to restore it self and work properly again.

I would advice if you do not know how to service the panel inside, you can give it to a watch repairer to fix it for you in other to prevent further damage on the watch.

Take care.

Posted on May 03, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,284 Answers

Hi, Reset: AC point is not located under the battery. It is at the edge of movement. Get an eyeglass with good magnification and you will find it.

Or

Use this link and check out for the right settings for your watch: http://support.tissot.ch/ If you are not able to fix the problem, contact Tissot directly. You will find contact details on the same page.

Take care

Posted on May 03, 2010

  • 4 more comments 
  • Shehu Pro
    Shehu Pro May 03, 2010

    O.k.., that probably what tissot will tell you to do and if it doesn't solve the problem, you might be asked to send it down for repairs..

    Take care


  • Shehu Pro
    Shehu Pro May 10, 2010

    O.k.....

  • Shehu Pro
    Shehu Pro May 10, 2010

    Alright..........

  • Shehu Pro
    Shehu Pro May 11, 2010

    Contact Tissot directly. You will find contact details on the same page.


    Take care

  • Shehu Pro
    Shehu Pro May 11, 2010

    .,,

  • Mark Hindle
    Mark Hindle May 11, 2010

    Hi, why do u mail pointless comments everyday? U ain't havin the money now even if you get it right, *******!, haha, go & hassle someone else u knobhead... ;-) thanks Mark

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

T-touch dont display altimeter, meteo and thermo. How can i reset it ?


I have the same problem with my t touch one, the first model with round push button, after take it to a battery replacement and service, and ask a tissot representative store, I receive two answers and both says that I have to change the movement... means ... the machine, and if is under warranty will be free, is maybe 6 or more years old so no more warranty, sad but true, I let it be. I will not spend at least 400 USD. to do it, so, try to enjoy the rest of functions left and a nice looking watch.

Oct 28, 2013 | Tissot T-Touch T33759851

4 Answers

Thermo shows 91.7c, Meteo shows just hpa and altimeter just m other 3 functions working fine.


same question here, but it happens to me after a dead battery replacement, although the temp on my watch indicate 78.0 c, another sympthons are the same

Oct 18, 2009 | Tissot T-Touch T33159851 Wrist Watch

1 Answer

Tissot T-Touch Baro way too high


Try to recalibrate the Baro/Altimeter as below:

Certain functions need to be calibrated. The altimeter and the Meteo are tied together. When a customer gets the watch, they should calibrate to either the Meteo or Altimeter. The easiest way to find out the altitude of the nearest airport (you can usually get this on line) and then go to the airport and adjust the watch. This will also calibrate the Meteo.

To calibrate the Altimeter:

1. Activate Crystal
2. Press Altimeter
3. Press and hold top + button until the watch beeps and display flashes.
4. Use + and – buttons to adjust altitude
5. Press center of dial to lock in.

Aug 05, 2008 | Tissot T-Touch T33159851 Wrist Watch

1 Answer

Tissot t-touch t0015204406100


Go to the offical Tissot site www.tissot.ch and download the pdf file "user manual" and there you'll have everything u need to know about operating this great watch...

Jan 12, 2008 | Tissot T-Touch T33759851

1 Answer

Tissot T-Touch : Faulty reading on Thermo, no reading on Altimeter and meteo not working either


If it's under warranty by all means pursue a fix. You might have to send it to a warranty center instead of working with your local dealer.

"Water proof" and "water resistant" are very different. About 20 years ago all watch companies stopped promising waterproof and started using the term water resistant. It gives them wiggle room in the guarantee, unfortunately. I believe T-Touch is supposed to be water resistant to only a few meters.

Nov 21, 2007 | Tissot T-Touch T33159851 Wrist Watch

3 Answers

T-Touch Pressure stopped working after battery was replaced.


A new watch is the answer, mine gave up after 4 years of service, and I've been told to find a new watch.

Nov 08, 2007 | Tissot T-Touch T33759851

2 Answers

The 'meteo' function doesn't work when I press the watch face.


This seems to ba a common problem. On mine both the Meteo and Altimeter stoped working. Apparently these watches have a fault with the water proofing and should not be worn in water!

Oct 23, 2007 | Tissot T-Touch T33759851

Not finding what you are looking for?
Tissot T-Touch T33159851 Wrist Watch Logo

Related Topics:

744 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tissot Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Tissot Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...