Question about Whirlpool Washing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
it could be something thats been stuck in the pump filter, usually on whirlpools these are located at the front of the machine behind the plastic kick plate on the bottom. you may need a couple of towels or old rags as there will be some water comes out of the filter when you remove it.
hope this helps
Posted on Jul 31, 2008
Remove bottom plastic panel across the front of machine- it just clips off (use a small screwdriver or bread knife to prise off). You will now see a round filter behind this panel- unscrew anticlockwise to remove- this is the filter. Sometimes filter can be hard to remove if you have things jammed in it- give it bit of a jiggle and it should come out without forcing it. Remember- if there is still water in the machine, this water will come out on the floor once you remove the filter- put down some towels!! Happy fixing!!
Posted on May 11, 2010
You most probably have a faulty water inlet valve...Not an uncommon problem..They can sound ok, but when you check the detergent drawer there will only be a trickle..Replace the inlet valve...Good luck...Nomess
Posted on May 24, 2010
Tips for a great answer:
Feb 22, 2012 | Whirlpool Washing Machines
Nov 11, 2011 | Washing Machines
Mar 27, 2011 | Washing Machines
May 20, 2010 | Washing Machines
Jul 17, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Oct 19, 2008 | Washing Machines
Jul 30, 2008 | Whirlpool AWM5104/1 Front Load Washer
Jul 18, 2018 | Whirlpool Washing Machines
75 people viewed this question
Usually answered in minutes!