Question about Heating & Cooling

1 Answer

Error 60 HI on a brivis HE-20 - Heating & Cooling

Posted by on

  • p1wittnauer May 03, 2010

    thank you for your information .

    It confirme what I thought it was, NG/10/lo modul.

    I have checked it but I have no way to repair it.It all started after a power black out,the fan started to work non stop.

    Brivis is not keen to sell this part to me.A tech will be send after a pay $225 for the call +part and labor.

    Regards



    Pierre

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,284 Answers

Hi, i have not really heard about error 60 on a Brivis HE-20 all the while i have been solving problems pertaining to it.
The errors that i know that are close to this error 20 include error code 61, 63, 64 & 67 and they simply indicate that the unit is not operating due to a malfunction or fault of the heater N-G1/lo module. This error can be reset at the power supply. If the error continues to appear, a service technician should attend to it..
So think is error 60 falls within that range too..

Take care

Posted on May 03, 2010

  • Shehu Pro
    Shehu Pro May 03, 2010

    O.k., i think that should fix it..
    Please don't forget to accept and rate the solution

    Take care


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brivis error code 62 hi


Hi Matthew,
It would seem obvious to contact the manufacturer's customer support department. http://brivis.com.au/

Aug 01, 2015 | Heating & Cooling

1 Answer

Brivis zone


$900 seems like a lot for a new HSI and flame sensors :( 54 seems to be with the supply air thermistor. does the unit still operate with the error?

May 09, 2014 | Heating & Cooling

3 Answers

Hi i have a brivis eh 30 unit that comes up with error 65 and 30 the display inside the unit says fan limp, if i reset it from the unit it works for about 1 hr then the same thing can anyone help please


Hi. Here are the error codes for your Brivis Heater. Error Codes 30 - relating to speed sensor, 40 - overheating, 65 - motor lock-out. Usually resetting the unit will resolved the issue. In your case, you already reset the unit and problem came back. This will require immediate attention by Brivis technician.

Jul 12, 2010 | Heating & Cooling

1 Answer

Hi any idea what causes this Brivis error. err


go to the brivis web page and type in serial number and error code theywill give you a code and repair instructions.adrian,,,,

Jun 29, 2010 | Heating & Cooling

2 Answers

Error code 62 on Brivis Me20 ducted heater


Hi
Error 62 is related to hot surface ignitor (HSI)or/nglo module

you can check the resistance of the ignitor should be less than 10 oms @ 20 degrees

failing that, if you incomming suppy exceeds 270 volt will also result in error 62

May 04, 2010 | Heating & Cooling

1 Answer

Brivas ducted heating not firing up. Gas supply ok electic supply ok. Spanner symbol on screen and Error 62 Model ME 20 E


Hello, We have Brivis Me20 gas ducted heating. It suddenly stopped working and gives error #60. Sometimes after pressing reset several times it fires up for a short period then fails again. Any ideas what might be wrong?
Thanks,
J

Apr 30, 2010 | Heating & Cooling

2 Answers

Error message 35 Hi brivis ducted heating


I had the exact same problem and called 1300brivis. They told me that the error means the thermister needs to be replaced. My unit is also out of warranty but they are still going to come out and fix it.

Apr 12, 2010 | Heating & Cooling

4 Answers

Brivis central heating fan will not switch off runs continuous


brivis wombat 2P 20 ducted heater, gas fires up but fan not starting
Any suggestions...???

May 12, 2009 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

2600 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...