Question about GE Profile WPRE6100G Top Load Washer

Open Question

What does the load sensor in my GE top load washer

I have a GE Profile WPRB9110DOWW top load washer. My wife ran a load on super and we got water on the floor. I opened up the washer and ran a small load and watched for leaks at all the hoses etc. but no leaks/drips were discovered. I did notice that when we ran the test load it was set at small load but the drum filled half full of water. My thought is that the tank is filling too much. I'm wondering what controls the water level for different load sizes, my question is what does the load sensor in my GE top load washer do?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: GE WJRR4170 washer comes out of overflow tube on super load

I have a 2005 model GE washer that would overfill only on SUPER size load. After looking around on the web, then inside the machine, I checked the tube from the tub to the switch, no problem there. Then I found an adjustment screw on the load size selector / pressure switch (all one piece). I moved it one turn clockwise, then ran a test cycle. I got lucky on the first try... no more overflow, the water comes up just above the top holes in the tub. I hope this will help others.

Posted on Jul 12, 2009

Ad
  • 101 Answers

SOURCE: how do you adjust the load level valve, ge top

cant it has to be replaced

Posted on Sep 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dark particles all over clothes once washed. I cleaned the washer, ran a tide washer cleaner through, checked and cleaned the screen filters that hot and cold hoses pump water through. Is there anything...


sounds like you may need to check your hot water heater for deterioration. since you have done all that you need to check your water supply. a water heater can deteriorate on the inside for a time before you will notice it. good luck

Sep 06, 2011 | GE Profile WPRE6100G Top Load Washer

1 Answer

GE Profile WPRE6100G Top Load Washer how do you bypass lid safety switch? Unit pumps but won't spin.


worst washer I ever owned how do you bypass water level so you can wash a comforter man I am so disappointed with this GE Profile energy saver if I can't move the water level up I'm going to put it out along the road a trash day and it's only 4 months old

Dec 19, 2010 | GE Profile WPRE6100G Top Load Washer

1 Answer

Washer doesnt stop filling up with water


There is either something clogging the air tube to the water level sensor or the water level sensor itself is bad. If you need help accessing the air tube or water level sensor feel free to ask.

Dec 01, 2010 | GE Profile WPRE6100G Top Load Washer

1 Answer

Leaking from under the washer


there are 2 metal clips between the top and front panel. you can use a putty knife to unlatch these clips and the front will come off, then you can look inside to see where the water is coming from.

May 29, 2010 | GE Profile WPRE6100G Top Load Washer

2 Answers

My GE Profile top load washer won't hold water


Your drain line is too low or has a blocked air gap. Take the drain line out of the drain. Hold it up high and turn the washer on to fill. If it fills and begins agitation,repair the drain line problem.

Sep 08, 2009 | GE Washing Machines

1 Answer

Water will not shut off in washing machine


Check to load size selector switch, sounds like tube came off of it. The tube goes from switch to bottom of tube, tells machine what size load and when to turn off water.

Jul 19, 2009 | GE WBSR3140DW Top Load Washer

1 Answer

GE Profile Washing Machine wont fill with water top loader


disconnect water lines from washer and check to see if sedement from water plugged up little screen filters

Jun 11, 2009 | GE Profile WPRE6100G Top Load Washer

1 Answer

GE WJRR4170 washer comes out of overflow tube on super load. It does not on Large load size. I have the front off and can see a large difference in water level from large to super size. Is this adjustable?


I have a 2005 model GE washer that would overfill only on SUPER size load. After looking around on the web, then inside the machine, I checked the tube from the tub to the switch, no problem there. Then I found an adjustment screw on the load size selector / pressure switch (all one piece). I moved it one turn clockwise, then ran a test cycle. I got lucky on the first try... no more overflow, the water comes up just above the top holes in the tub. I hope this will help others.

Mar 15, 2009 | GE WVSR1060A Top Load Washer

1 Answer

GE Profile Top loading Washer Model # WSSR3120W1WW ---


The water diverter could be plugged. or the diverters solinoid has gone bad on the hotwater side. It is located on the diverter itself.

Feb 10, 2009 | GE Profile WPRE6100G Top Load Washer

Not finding what you are looking for?
GE Profile WPRE6100G Top Load Washer Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...