Question about Philips Magnavox 9P6034C 60" Rear Projection Television

1 Answer

I have a 64p8341 projection tv when you turn it on the power lite blinks 4 times steady then 4 times agaain no sound no picture

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. You’ll need to reset the Projection TV and to reset it follow these steps:


  1. Turn off the television and wait for 5 minutes.

2. After 5 minutes unplug the television power cord from the electrical outlet.


3. Let the television remain without power for more then 1 minute.


4. Plug the power cord back into the electrical outlet. If the television is plugged into a power surge protector, remove it from there and plug it directly into the wall outlet. Turn on the television. If the issue is resolved, then the problem is with the power surge protector and not the television.




If the issue is not resolved then this might have happened due to over-voltage. Please check the power supply unit for swollen/bulged capacitors and burnt wires/components on the power supply board of your TV. You should try and turn off the TV for 8-10 hours to reset it. Please make sure to turn off and unplug the TV for at least 1 hour (this will drain off current from all components especially capacitors) before you perform any repairs. Also note that the TV consists of very high voltages even when it is in OFF condition. All this is only recommended if you have electrical expertise and know how to solder/re-solder components.


Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks

Rylee

Posted on May 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When TV is turned on, there is no picture but a very, very faint verticle haze in the middle of the screen. At first, the power switch lamp is green and blinks slowly, then at a faster pace. At the same...


Yes,it will resolved ur tv picture issues.This tv the projection lamp has not been replaced at least 1 1/2 or 2 years right?The tv on an in used at 4 or 5 hours a day right? The projection lamp life span are over.Sometimes the Ballast board have to be replaced too.This Ballat board it to help to ignite the projection lamp.

Jun 26, 2010 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

My picture shut off. Power lite clicks, blinks,no picture


how many times is the power light blinking as thats a error code. 3 blinks is the most famous which means convergence circuit failure.

Oct 26, 2009 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Tv turns on w/pic then pic dissapears light blinks 4 times


I have the same issue, we've had to change our bulb three times in less than two years. now we have 61" expensive paper weight. Our current bulb is less than 6 months old. The TV is only 2 years old and like i said this is our third bulb.

the blue light blinks 4 times. you get sound. then a few minutes the the picture returns... then it goes out, and the cycle goes on.

A solution to this would be greatly appreciated.

Oct 08, 2009 | RCA HD61LPW165 61" Projection HDTV

1 Answer

MY PHILIPS 64P8341 BLINKS 6 TIMES THEN IT


This tv had problem with ssb ( small signal board), go to ecompass.com , just provide model number tv.
Thank you

Aug 08, 2009 | Philips 64P8341 64" Rear Projection...

1 Answer

Power lite blinks 10 times. no pic no sound. cant turn on or off


red light flashes 4 times then stays on for about 5 seconds then flashes 4 times again any idea what this means and how i can fix it tv is about 4 years old and only just started doing this

May 10, 2009 | Panasonic Viera TH-50PZ80U Plasma TV

1 Answer

Sony KDS-60A2000 projection TV: power led blinks 4 times


the projector bulb has gone out you need to replace it.

hope this helped
please rate well

Mar 04, 2009 | Sony KDS-60A2000 60" HDTV

1 Answer

Philips 4 blink error


We unplugged the tv for 2 minutes. Plugged it back in, turned it on- had to press the on button twice. I am now watching the tv.

Feb 23, 2009 | Philips 64P8341 64" Rear Projection...

1 Answer

Philips 64P8341 power blinks 6 times what does this error code mean?


It could be time for a new lamp. Your manual should give you this "error code"

Aug 24, 2008 | Philips 64P8341 64" Rear Projection...

Not finding what you are looking for?
Philips Magnavox 9P6034C 60" Rear Projection Television Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...