Question about Logitech Quickcam Chat Webcam

1 Answer

I have a logitech webcam it is a skype everthing works fine except i cannot hear the other person that i am on with my speakers are fine they can hear me but i cannot hear them what could be the problem?

Posted by on

  • Adnan Bhatti
    Adnan Bhatti May 11, 2010

    Ask the other person whether their microphone is working or not.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Logitech Master
  • 2,981 Answers

If the problem is with just one contact its probably his mic setting at fault
Both check your set-up
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Posted on May 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A NEW HP ALLIN 1 WIDOWS 8. ON FACEBOOK VIDEO CHAT THEY CAN HEAR ME, BUT I CAN'T HEAR THEM


Launch the Logitech QuickCam or Webcam software on your computer. Verify that you see yourself Logitech Webcam software window. Close the software window. Sign in to Skype. Click the "Tools" menu and select "Options." Click "Video Settings," check the "Enable Skype Video" and "Start my video automatically when I am in a call" boxes. Select your Logitech QuickCam from the drop-down list. Your webcam should display video in the window. Click "Audio Settings" if your QuickCam has a built-in microphone and select it from the microphone drop-down list. Check the "Let Skype adjust my audio settings" box in "Audio Settings" so Skype recognizes your microphone. Click "Save" to save the options for your audio and video settings. Skype will close the options menu.

Jan 28, 2013 | Logitech Quickcam Chat Webcam

1 Answer

Can't hear person when using skype and they can't hear me


i have a micorsoft webcam the person on the other end not hearing me but i am hearing tham

May 07, 2012 | Logitech Quickcam Chat Webcam

1 Answer

Microphone/speaker issues?


HI there go in call option in skype and make default your microphone from there. After that it will start work again. Thanks.

Mar 11, 2010 | Logitech Quickcam Chat Webcam

1 Answer

I have a Logitech Quickcam Pro 9000 with the latest drivers and the latest Skype installed. I can see the other person during a video call, but I can't see myself and they can't see me. Just a spinning...


hello, try to close all the quickcam software before you open skype. I think its a program collision. also check msconfig that no logitech program starts. click->start->run->write msconfig and click startup tab. uncheck all logitech. get back if it doe sent work

Oct 12, 2009 | Logitech Quickcam Chat Webcam

1 Answer

The person i am calling on skype cant see or hear me


You can only use the webcam with one device at a time? If you are sure the webcam is working properly shut down the software specifically for your webcam.

Log into Skype as normal.

Do you see the video call options in Skype?
In Skype you can check what you see in the following path?
Tools/ Options/ Video Settings/ Camera
Is you webcam listed if not link it using the option here.

May 11, 2009 | Logitech Webcam

1 Answer

Logitech Quickcam Deluxe causes speakers to go out.


Have you set your cam up on skype
Go to TOOLS, then OPTIONS, and click on Audio Settings
and set the Microphone and Speakers
to the computer Audio Card.
Then click on the Video Settings.
The camera if installed properly
will come up and show a picture.
Then on the bottom of the page click on Save.
program

Jan 26, 2009 | Logitech Webcam

1 Answer

Webcam - Recipients can't see me.


Hi,
I got this of Skype.
We are sorry to hear that you are having problems with Skype video.
Thank you for contacting Skype customer support about your video settings.
If you are using a Logitech webcam, please follow the steps below:
NB! To begin with please close Skype and make sure that you have unplugged the webcamera before installing the installation software that came with it.
1) Go to the control panel and open Add/Remove programs. Then from there uninstall any Logitech webcam software and Logitech webcam drivers from the list shown.
2) Download the latest drivers for your webcam from
http://www.logitech.com/index.cfm/405/&cl=roeu,en?prodcrid=405

3) Open the webcam installer package by double clicking it.
Now select: Custom installation (advanced) and click next. You are now given a choice whether you would like to install the software and drivers or just the drivers. Please select the second option (Logitech QuickCam drivers) then uncheck 'Enable VoIP Device Management' and click 'Next'. Accept the agreements and on the next page select 'I do not want to activate this Service' (Logitech destkop Messenger). Click 'Next' and the Logitech drivers should be installed. Restart your system and plug in your webcam. Your webcam should now be correctly installed.

Oct 31, 2008 | Logitech Quickcam Chat Webcam

1 Answer

Sound - no video


Both try using windows live and set up audio and video in the settings as you did with Skpe, as it's a similair programme and supports any camera. If that works better then Skype has a problem with your camera makes.

Feb 21, 2007 | Logitech QuickCam Orbit Personal Web...

Not finding what you are looking for?
Logitech Quickcam Chat Webcam Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2980 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...