Question about Vehicle Parts & Accessories

1 Answer

All the functions on my Bell 960 radar stopped working. When I plug it in an turn it on, four rectangular/square bars appear on the right hand sid e of the display and that's it. Is there any fix? Thanks And regards, Clive Andrews clive_andrews@sbcglobal.net

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,284 Answers

Hi, since all the button on the bell 960 radar has stopped working, it may be due to a bad control board beneath the button or that the system has frozen up. Try resetting the device by following the instruction on the manual on how to reset and if that does not make it work, you have to contact the technical support of the company to book an appointment for the repair/replacement of the control board..

Take care

Posted on May 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does a 8 appear upon start up on the screen?


That number is the signal strength indication. IF you get four beeps when that shows up and it could be E instead of 8, the unit has detected something wrong.

Aug 15, 2014 | XRS 9440 Radar Detector

Tip

Rectangular or Square LCD/TFT


This is a common question which comes to each and everyone's mind who

are about to purchase a new TFT/LCD that whether to purchase a

rectangular or square LCD/TFT.

As an experts opinion, I would suggest that it totally depends upon the users

requirements. As far as my experience is concerned most of the users of

these TFT/LCDs are home users and they never use any such application

which requires widening of display. Only with few industrial or defence based

organization do require such zooms and that too only for radar display.

As an experts opinion if you require to purchase a TFT/LCD and you are

wondering whether that should be square or rectangular I would suggest

you go for a square LCD/TFT because if you are watching a movie or you

are viewing a web page and that movie or web page is just zoomed out in

width it would look awkward. On the other hand if it is zoomed out in both

dimensions horizontal and vertical. It looks soothing to ones eyes and you

will definitely going to like that you took the decision to purchase a square

LCD/TFT


on Jul 27, 2010 | Computers & Internet

1 Answer

My Advent 5421 Touchpad Is Not Working!!!


Advent laptop computers are equipped with a touchpad and two buttons that service the function of an external mouse. The touchpad can be turned on or deactivated, depending on the user's preference. It's not difficult to either activate or deactivate it.

Power up the computer. Connect a plug-and-play computer mouse to a free USB port on the laptop. The mouse is just temporary to help you get the touchpad working again. Locate the touchpad icon, which is in the lower right-hand side of the screen. The icon will appear as a gray square or rectangle, with two rectangular buttons underneath. Use the mouse to double-click on the touchpad icon, opening a window on your laptop screen. Inside the touchpad window, click the option labeled "Enable Device". Select other options for the touchpad, such as pointer speed and shape. Click "Apply", then "OK". Disconnect the mouse from the laptop.

Feb 02, 2013 | Advent Computers & Internet

1 Answer

Escort passport 9500 only had it for four months just a day ago i update the radar on my computer then plug it into my car the it went on for a sec the turned off it wont stay on i try other car to see if...


I am having the same problem. I just did the software upgrade and the dector now turns off and it must be unpluged then pluged back in and it will only operate around 5 minutes then you have to do it all over again. It appears to be a product problem with software down loads.

Jun 30, 2011 | Passport 9500i Radar/Laser Detector

1 Answer

Hi, I have a Radar Screen. Furuno 1942 MK2 . What Radar Dome can i plug this into. I have a Furuno 1720 Dome


A 1942 is a 6 kw radar a 1720 is either a 1.5 or 2.2 kw dome. The two will not work together. Besides the cabling is different. Also the radar cable on a 1942 is round where as the 1720 is square. The 1942 display should work fine on a 1943 navnet radar.

Sep 24, 2009 | Furuno 1942 Mk2 Radar

1 Answer

Need a Window Mounting Bracket


well if you modify it to make it work and sme thing happens to your radar detector it wont be covered by bell so i would call them and have them send out the right one

Jul 24, 2009 | Vector 995 Radar Detector

1 Answer

OVEN WILL NOT (GAS) LITE


With the assumption you have a gas range with electric ignition and is fully powered (plugged in); the possible problem may be the "Electric ignitor/Glow bar".

When turning on the oven, do you see a redish (good) or yellowish (not good; replace) glow emitting from the very bottom or the oven/broil area?

There are typically 2 types of electric glow bar ignitors; Round and Square. Ignitors are actually fairly easy to replace, removing 2 mounting screws and cutting/splicing 2 seperate wires together. Is your ignitor "round" (circular - like size of finger ) or "square" (rectangular - like snickers candy bar)

If your ignitor is not coming on at all; this can be a couple things;

Defective Ignitor - Gone completely Bad - Out (Assuming your have full power 110v to ignitor)

Defective Gas Valve - Assist in passing 110V to Ignitor

Defective Control Board / Thermostat: Assist in passing 110V to Ignitor

FYI - As a safety measure, the ignitor needs to "come on and appear solid red" to properly pass power to gas valve; thus opening and allowing gas to pass through the burners and combust.

Jan 27, 2009 | Magic Chef 31203 Gas Kitchen Range

2 Answers

Cobra XRS 9430 Sound Stopped Working


ok, stupid question but is the volume turned up?

Nov 10, 2008 | XRS 9330 Radar Detector

1 Answer

PT-53X54J Power Switch Flashing Red and more...


think it's the projection bulb, easy to replace yourself

Apr 14, 2008 | Panasonic PT-53X54 53" Rear Projection...

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vehicle Parts & Accessories Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14228 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...