Question about Sanyo Cell Phones

2 Answers

Sanyo cellphone model spc3810. wireless service provided by Sprint. when trying to access mobile web error code 2048 displays. when using other phone modes (texting, etc) other error codes displayed are 2012, 906, and others.

Posted by on

  • Larry Borselli
    Larry Borselli May 02, 2010

    I understand that these are error codes that can by explalined. I am looking for a fix that does not involve going into sprint. More of a software reboot type of thing. A soft reset doesn't work like it has for others with this problem.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Sanyo Master
  • 2,923 Answers

Sanyo SPC3810 has a full browsing experience and it's capable of mobile email, instant messaging, and thread text messaging.

Meaning, you should be able to access any web sites using its internet browser and should be able to send text messages without any error.

This may sound stupid, but you need to contact Sprint and verify if you have the required data plan to access the internet. Text messaging should not be affected.

If you have an unlimited data plan, then the problem has something to do with the program of the cell phone. The software could be corrupted. And the best fix for this is by upgrading the firmware of the cel phone.

Unfortunately, Sprint should be the one upgrading the firmware of the phone. Last option, RMA the phone and/or ask for a replacement.

Thank you and good luck!

Posted on May 02, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

These are Sprint network error codes:

2048 Error Code #2048 Network Busy. Please try
again. Handset cannot acquire a traffic channel - This
error message appears after 60 seconds of not being
able to acquire a traffic channel

906 "906 Invalid Descriptor" The descriptor presented
is not understood.

I recommend you bring affected phones into a Sprint Point-of-Sale and see if a Customer Service Tech can't adjust them for you.
I hope that helps.

Posted on May 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got my sanyo incognito a little ago with my gf. it is my phone but she set it up and changed my lock code so that i didnt reset my phone but i need to reset it. please help me


I have three options for you:
  1. Get the lock code from your girlfriend (hopefully she will comply if she remembers it)
  2. Try the last four numbers of your mobile number (this is the default lock code)
  3. Last resort: Call customer service with your service provider.

Customer Service for Sprint: 1-888-211-4727

Answer found on pg 56:
Sprint Manual for Sanyo Incognito

Jun 17, 2011 | Sanyo Incognito Scp-6760

1 Answer

I seem to have the wrong sid # in my phone, one from another carrier,.. I'm looking for the unlock code so I can enter the right sid for my carrier.. I guess it would be something like this ##??????#... ...


Your cell phone may be locked to a particular cell phoneprovider and in this case it needs to be unlocked to use with a different cellphone service provider. To get the security code/restriction code to unlock thecell phone from the current cell phone provider so you can use the SIM cardwith a different phone provider, Please click on this link and follow myinstructions :- http://www.fixya.com/support/r4049238-unlock_cell_phone If your phone provider does not help you then this WEB siteit provides security codes for a small price. http://www.mobileunlockstore.com/?gclid=CKDb2_y2558CFSlJagodxBkDHw Try this WEB sites - http://www.unlock-free.com http://www.unlock-zone.com/ http://www.unlocking.com/

Mar 09, 2011 | Sanyo PRO-700 Cellular Phone

1 Answer

Phone is a sanyo 2700 my carrier is i wireless every time i try to access the web i get an error 67 registration failure


Hi, what causes the display of error might be that the access web settings might not be correct. so you can check the web access setting if it correct.

Take care.

Jul 03, 2010 | Sanyo SCP-2700 Cell Phone

2 Answers

Can you tel me how to unlock my sanyo katana II cell phone on the sprint network?


NETWORK UNLOCK CODE:

You can unlock it by flashing your mobile if your mobile is a CDMA mobile...
The procedure for flashing your mobile is in the link below
http://hubpages.com/hub/How-to-Flash-your-cell-phone
It has an video explanation.

If your mobile is not an CDMA mobile , you can get the network unlock code(NUC) by just contacting the current network provider customer caredepartment.It is free of cost.

Therestrictioncodecan be got from your old service provider..This restriction code iskeptto prevent someone who stole themobile from using it withanotherprovider...

They will have a security check done with your date of birth etc..to verify whether you are the exact owner of the phone..

After that they will provide you the restriction code to unlock it and use it with another service provider..

It is all free of cost donot pay anyone for this seeing some advertisement over internet . That is all fake ads.

The above proceudre works and you can verify that by seeing the rating of an happy customer here..
http://www.fixya.com/support/t4035818-need_unlock_nokia5130c_2_use

May 30, 2010 | Sanyo Cell Phones

1 Answer

How do i unlock a sprint sanyo for free


When you place a new or a existing SIM card from another phone provider into your mobile phone and it asks for a Security code then :-
This phone is locked to the original mobile phone provider. You need to contact this mobile provider to ask for the unlock code (security code) for this phone. You need to provide proof of ownership etc and the phone's unique IMEI number which is located inside the phone under the battery. They use this number to generate the unlock code for your phone.
They should provide you with instructions on how to enter this code into the phone.
Once you unlock the phone, then you can insert a new SIM card in this phone or sign up with another phone provider using this phone.

You could ring the phone provider and ask for the unlock security code because you are going overseas and wish to use your phone with a prepaid SIM card from another country. This maybe a free service.
The other way to get your phone unlock is to use a phone unlocking company on the Internet, they usually charge a couple of Dollars for their services. Use Google and search for "Security unlocking code” companies in your area.
You can also try this WEB site :-
http://www.mobileunlockguide.com/mobile-phone/

Jan 09, 2010 | Sanyo SCP-2700 Cell Phone

1 Answer

Motorolla sliver asking for subsidy password


Justification for use of Subsidy PasswordThe term "subsidy" refers to the subsidization of cell phones sold to customers that purchase mobile phones as part of a contract with the mobile service operator. Many network operators provide these subsidies as an incentive for users to sign extended contracts, and use the subsidy lock as a means of protecting their investment. The installation of such locks means that users often are forced to purchase a different phone if they decide to switch their network (of advantage to both the OEM manufacturer and cellular service provider).
CDMA cellular providers that use SUBSIDY locks on their handsets:
Ntelos, Cricket, Sprint, Quest, US Cellular & SureWest. (Not a complete list)
GSM: (SIM LOCK) T-Mobile Cingular AT&T
Alltel or Verizon Wireless do not use any type of subsidy locks on their CDMA phones. Default Code:000000 or 123456 or 654321
Prepaid cellphones from Alltel & Verizon Wireless come locked from the store, but Verizon Wireless prepaid cellphones can be unlocked with a call to Verizon.
Link for more information about the "subsidy lock" [1]

[edit]Unlocking services and softwareAs a result of the lack of open access to the Subsidy Password database, a number of online services have grown around providing alternative unlocking software. The methods used to unlock cell phones varies although most involve reading the code from the phone and resetting it.
Network carriers some times unlock their customer's phones. The practice is not different from that when a user unlocks his own phone. While one could consider that the DMCA brings the legality of such applications under question, recent legal cases such as Lexmark Int'l v. Static Control Components have confirmed that the use of software to reprogram such phones is not illegal. This is particularly true since unlocking applications increase compatibility with alternative networks, promote positive competition and allow customers greater freedom to use the phones that they own.
There are no prohibitions to unlocking in the United Kingdom.

Sep 01, 2009 | Motorola Mobility SLVR L7 Cellular Phone

1 Answer

Sanyo 2400 - Parental Control Reset


Call your service provider. If it is Sprint, we can walk you through accessing the unlock code on most phones. I always recommend trying the last four of the phone number or 0000. Hope this helps!

Dec 31, 2008 | Sprint PCS Phone SCP-2400 by Sanyo(r)...

11 Answers

How to activate Packet Data of my n6300?


everytime mu nokia 6300 i use internet , it asks "subscribe to packet data first . pls tell me how?

Jul 24, 2008 | Nokia 6300 Cellular Phone

3 Answers

Sanyo DLX cell phone for Sprint - error w302


All you have to do is turn off data services. This error occurs when you have data services blocked on your phone, so your phone errors when trying to setup wireless backup.

May 11, 2008 | Cell Phones

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Jeffrey Thomas
Jeffrey Thomas

Level 1 Expert

24 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sanyo Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...