Question about Westinghouse 19" Widescreen Flat Panel LCD Monitor

2 Answers

'on off' controls don't work gahern@gerryaherncfp.com

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My toshib 37 wlt does not switch on by remote or by manually by the tv changed remote but still the same comes on when turn it off and on from mains but takes time remote works when on just cant turn it on when off again

Posted on May 03, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague

http://www.badcaps.net
Please note that when the caps failed in these Westing house, it usually takes out the fuse and the transistors in the inverter circuits with it.

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In oven the start button is not working


see the details and fix it. God bless you
Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.

Touchpad If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the dishwasher display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.

User Control and Display Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.
11_16_2012_1_04_07_am.gif

Nov 15, 2012 | Whirlpool Microwave Ovens

1 Answer

I want whirlpool oven mechanic in kakinada


see the details and proceed according. fix it. God bless you
Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.


11_16_2012_1_06_06_am.gif

Nov 15, 2012 | Whirlpool Microwave Ovens

1 Answer

My microwave keypad wont work the light is on and the reading says please touch clock and set time of dry


SEE THIS CAUSES AND FIX IT. God bless you
Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.

Touchpad If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.
ser Control and Display Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

10_2_2012_12_33_23_pm.gif

Oct 01, 2012 | Kenmore 80809 Microwave Oven

1 Answer

I have GE JVM1540DN1BB microwawe. It beeps all the time and says "keypad sorted" and service needed. The beep sound is annoying and it beeps every 30 seconds


see this causes and fix it. God bless you
Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective
Touchpad If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.
User Control and Display Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

10_2_2012_12_19_39_pm.gif

Oct 01, 2012 | GE Microwave Ovens

1 Answer

Maytag microwave keypad


see this causes and fix it. God bless you
Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.

Touchpad If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.

User Control and Display Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

10_1_2012_10_13_41_pm.gif

Oct 01, 2012 | Maytag MMV4205 Microwave Oven

1 Answer

My leisure dwlt65 dishwasher keeps switching its self off when going till wash


see this causes and fix it. God bless you
Touchpad and Control Panel If the buttons don't work on the control panel the entire touchpad and control panel assembly may need to be replaced. If the display works but the dishwasher functions are all out of synch, or some of the buttons don't respond properly the entire touchpad and control panel might need to be replaced.

Touchpad If the buttons don't work on the control panel, the dishwasher touchpad might be at fault. Generally speaking, if the dishwasher display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.
Main Control Board The dishwasher has a main control board which regulates nearly every function in the dishwasher. If the control panel buttons don't work, and other causes have been have ruled out, the main control board might need to be replaced.

Sep 28, 2012 | Leisure DWLT65 Dishwasher

1 Answer

Ceiling fan with remote control stopped working suddenly, ruled out battery for remote control, because I changed a new one, ruled out circuit since everything is working, I don't have a pull on the...


with Hampton Fans,, normally if the remote is good with a known good battery , and it quits working,, its the remote receiver, not the actual remote that goes bad. you can contact these guys I heard they have the part you need http://www.ceiling-fans-n-more.com/hampton-bay-ceiling-fan-parts.php

Sep 07, 2011 | Hampton Bay 24750 Huntington III Ceiling...

1 Answer

Don't have remote control how can you get it to


Don't know that fan even thou I sale Fanimation! If it came with a remote & has no pull chains then you can only use the remote feature. You can order a new transmitter, that you would have to match the dip switches in the receiver to. I would need to have model# of fan. www.fanfairceilingfans.com fanman9952@aol.com

Aug 19, 2011 | Fanimation Pedestal in White with Standard...

1 Answer

Gage,s on dash don,t work...ac control panel don,t


part of the cars computer may be fried or you have some fuses out that control the gauge cluster.

Nov 19, 2009 | 2005 Nissan Maxima

Not finding what you are looking for?
Westinghouse 19" Widescreen Flat Panel LCD Monitor Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Computers & Internet Experts

Cindy Wells

Level 3 Expert

5054 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Paul Bade

Level 3 Expert

1516 Answers

Are you a Westinghouse Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...