Question about Computers & Internet

2 Answers

Hi im wondering how to find the host name/header of a subdomain on an ip?.. for example, say yahoos ip address is x.x.x.x , and the news section on that page is filed under the same ip.. i could access it through http://x.x.x.x/~news and still bypass dns.. how can i go about finding these host headings? to redirect to specific subdomain through ip. This is not for a website i host. Any help greatly apreciated thanks

Posted by on

  • omather
    omather Jun 21, 2010

    Unfortunately this information was not what i am looking for, but thanks anyway for your effort.
    To find an ip address of a website i can use:
    http://www.selfseo.com/find_ip_address_o...

    for example one of googles ip address is 74.125.43.19
    i can type this address in the webbar and get google.
    googles mail client www.gmail.com is stored under the same ip address 74.125.43.19
    but when i type this address i am getting the google page again. I want to know how to find a hosts (google for examples) subdomain headers, to redirect through ip address to subdomain.. for example 74.125.43.19~mail to redirect through ip to gmail not google.

    this is only an example and not valid header

    any help appreciated

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

Try google:
inurl:news site:www.microsoft.com

Did this information solve your problem?

Posted on Jun 01, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 135 Answers

Hi,If you find domain name for your new website site ,you can use this http://www.xnynz.com/ site ,in case just visualized ,see the browsers address bar.All the best.

Posted on Jun 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi ..I can't connect to my yahoo messnger..And it says here's the problem..hope u can help me.. Checking virtual IP servers... [VIP Raw] Resolving host name vcs1.msg.yahoo.com... [PASSED] [VIP Raw]...


can you get an internet connection?

click start control panel internet options you will see a home page box To Create Page Tabs type each adress on its own line (type in yahoo.com)

check your firewall settings make sure yahoo is allowed

click start type in cmd press enter
you should have a black screen you are in dos mode
type in ipconfig

you should see all of your connection details
type in your default gateway adress into your browser (search engine)

hope this helps you

Oct 18, 2011 | Yahoo Messenger

Tip

Virtual Server / Port Forwarding does not work from within the Local Network


When you use port forwarding in Virtual Servers and try to test it from within the local network, it may fail. When for example, port 80 is forwarded to a web server in the local network, you may get the router's home page instead of the web server's one or you may get nothing at all. When you try to use the server from outside the local network it will work fine though.

This can happen when you try to access the router's WAN IP address from within the local network. In order for port forwarding to work from within the local network, the router needs to support a feature called NAT loopback. This is not a part of the specification of Belkin routers and modem-routers, so most of them will not have the feature, and if a router does have it, it is not supported.

In order to use the server from within the LAN, you can address it by its internal LAN IP address (e.g. 192.168.2.101).

If the WAN IP address has a DNS host name associated with it, such as www.example.com, and you need to use that name to connect to the server, you can do so by associating the name to the local IP address in the hosts file (a file called hosts with no extension). This file lists IP addresses and host names and is used before actual DNS lookups are done. You can add lines to the hosts file using a text editor like Notepad on Windows. The lines look like:

192.168.2.101 www.example.com www.otherdomain.com # comment

The lines contain an IP address and one or more host names separated by white space. Anything that follows a hash sign is a comment and will be ignored. You will need to change the hosts file on all machines in the LAN that need access to the server.

On Windows, the hosts file can be found in C:\Windows\System32\Drivers\Etc on Windows XP, Vista and Windows 7, in C:\WinNT\System32\Drivers\Etc on Windows 2000, and in C:\Windows on Windows 98 and ME. You need to have administrator rights to edit the file; on Windows Vista and Windows 7 you need to run Notepad as administrator.

on May 05, 2010 | Computers & Internet

Tip

Backtracking EMAIL Messages


Tracking email back to it's source: Twisted Evil cause I hate spammers... Evil or Very Mad.

Ask most people how they determine who sent them an email message and the response is almost universally, "By the From line." Unfortunately this symptomatic of the current confusion among internet users as to where particular messages come from and who is spreading spam and viruses. The "From" header is little more than a courtesy to the person receiving the message. People spreading spam and viruses are rarely courteous. In short, if there is any question about where a particular email message came from the safe bet is to assume the "From" header is forged.

So how do you determine where a message actually came from? You have to understand how email messages are put together in order to backtrack an email message. SMTP is a text based protocol for transferring messages across the internet. A series of headers are placed in front of the data you can usually backtrack a message to the source network, sometimes the source host. A more detailed essay on reading email headers can be found.

If you are using Outlook or Outlook Express you can view the headers by right clicking on the message and selecting properties or options.

Below are listed the headers of an actual spam message I received. I've changed my email address and the name of my server for obvious reasons. I've also double spaced the headers to make them more readable.

Return-Path: <s359dyxtt@yahoo.com>

X-Original-To: davar@example.com

Delivered-To: davar@example.com

Received: from 12-218-172-108.client.mchsi.com
(12-218-172-108.client.mchsi.com [12.218.172.108])
by mailhost.example.com (Postfix) with SMTP id 1F9B8511C7 for <davar@example.com>; Sun, 16 Nov 2003 09:50:37 -0800 (PST)

Received: from (HELO 0udjou) [193.12.169.0] by 12-218-172-108.client.mchsi.com with ESMTP id <536806-74276>; Sun, 16 Nov 2003 19:42:31 +0200

Message-ID: <n5-l067n7z$46-z$-n@eo2.32574>

From: "Maricela Paulson" <s359dyxtt@yahoo.com>

Reply-To: "Maricela Paulson" <s359dyxtt@yahoo.com>

To: davar@example.com

Subject: STOP-PAYING For Your PAY-PER-VIEW, Movie Channels, Mature Channels...isha

Date: Sun, 16 Nov 2003 19:42:31 +0200

X-Mailer: Internet Mail Service (5.5.2650.21)

X-Priority: 3

MIME-Version: 1.0

Content-Type: multipart/alternative; boundary="MIMEStream=_0+211404_90873633350646_4032088448"

According to the From header this message is from Maricela Paulson at s359dyxxt@yahoo.com. I could just fire off a message to abuse@yahoo.com, but that would be waste of time. This message didn't come from yahoo's email service.

The header most likely to be useful in determining the actual source of an email message is the Received header. According to the top-most Received header this message was received from the host 12-218-172-107.client.mchsi.com with the ip address of 21.218.172.108 by my server mailhost.example.com. And important item to consider is at what point in the chain does the email system become untrusted? I consider anything beyond my own email server to be an unreliable source of information. Because this header was generated by my email server it is reasonable for me to accept it at face value.

The next Received header (which is chronologically the first) shows the remote email server accepting the message from the host Oudjou with the ip 193.12.169.0. Those of you who know anything about IP will realize that is not a valid host IP address. In addition, any hostname that ends in client.mchsi.com is unlikely to be an authorized email server. This has every sign of being a cracked client system.

Here's is where we start digging. By default Windows is somewhat lacking in network diagnostic tools; however, you can use the tools at to do your own checking.

davar@nqh9k:[/home/davar] $whois 12.218.172.108

AT&T WorldNet Services ATT (NET-12-0-0-0-1)
12.0.0.0 - 12.255.255.255
Mediacom Communications Corp MEDIACOMCC-12-218-168-0-FLANDREAU-MN (NET-12-218-168-0-1)
12.218.168.0 - 12.218.175.255

# ARIN WHOIS database, last updated 2003-12-31 19:15
# Enter ? for additional hints on searching ARIN's WHOIS database.

I can also verify the hostname of the remote server by using nslookup, although in this particular instance, my email server has already provided both the IP address and the hostname.

davar@nqh9k:[/home/davar] $nslookup 12.218.172.108

Server: localhost
Address: 127.0.0.1

Name: 12-218-172-108.client.mchsi.com
Address: 12.218.172.108

ok, whois shows that Mediacom Communications owns that netblock and nslookup confirms the address to hostname mapping of the remote server, 12-218-172-108.client.mchsi.com. If I preface a www in front of the domain name portion and plug that into my web browser, http://www.mchsi.com, I get Mediacom's web site.

There are few things more embarrasing to me than firing off an angry message to someone who is supposedly responsible for a problem, and being wrong. By double checking who owns the remote host's Ip address using two different tools (whois and nslookup) I minimize the chance of making myself look like an idiot.

A quick glance at the web site and it appears they are an ISP. Now if I copy the entire message including the headers into a new email message including the headers into a new email message and send it to abuse@mchsi.com with a short message explaining the situation, they may do something about it.

But what about Maricela Paulson? There really is no way to determine who sent a message, the best you can hope for is to find out what host sent it. Even in the case of a PGP signed messages there is no guarantee that one particular person actually pressed the send button. Obviously determining who the actual sender of an email message is much more involved than reading the From header. Hopefully this example may be of some use to other forum regulars.

Good luck!

on Dec 23, 2009 | Computers & Internet

1 Answer

I am not able to connect to the google sites from my system. I am able to browse all other sites. What should i do?


If you are using windows xp:-

Click Start, click Run, type %systemroot% \system32\drivers\etc, and then click OK.
  1. Rename the hosts file to hosts.bak.
  2. Create the new default hosts file. To do this, follow these steps:
  3. Right-click an open space in the %WinDir%\system32\drivers\etc folder, point to New, click Text Document, type hosts, and then press ENTER.
  4. Click Yes to confirm that the file name extension will not be txt.
  5. Open the new created hosts file in a text editor, for example, in the Notepad.
  6. Copy the following text to the file:
For Windows XP or Windows Server 2003

# Copyright (c) 1993-1999 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host 127.0.0.1 localhost

Aug 10, 2010 | Computers & Internet

1 Answer

Am trying to set up a Windows 2003 server to serve web pages over the Internet. Have got a DSL line from Embarq. They installed a EQ-660R interface which is really build by Zyxel. I can reach the Internet...


In order to access your default web page remotely, port 80 "INBOUND" must be open to the internet.

To access your web server, two things need to happen.
The first is you or someone else must initiate a http request on port 80 using the public IP Address of your DSL connection.
Second, your router must forward that request to your servers internal ip address.

Ex. Lets say your public ip address is 24.39.45.10. In a browser window from a remote location, you enter the URL http ://24.39.45.10 The request will be sent to your router on port 80.

Your web server will not have the ip address 24.39.45.10 because it's on the private network side of your router. So, lets say the private ip address of you server is 192.168.1.100

You need to configure your router to take the http request coming from the internet on port 80 to ip address 24.39.45.10 and forward that request to 192.168.1.100. This is known as port forwarding.

You also need to configure the host header name of your "web page" so it knows it needs to display the web page.

Since we're just using ip addresses in this example and not an actual FQDN (fully qualified domain name), you would make a host header entry for the web page of 24.39.45.10.

To do this open IIS.
Navigate to the web site in question and right click on it then select properties.
On the website tab, ensure the port number is set to 80 and choose the appropriate internal ip address if you have more than one network adapter in the server.
Next click on the advanced tab and look for the heading Multiple identities for this site. This is where you enter the ip address 24.39.45.10.

If you have a fully qualified domain name, you would enter the domain name instead of the ip address as specified in this example.

Host header names are the key to running multiple websites from one physical server as long as it has the necessary horsepower to do so.

Hope this helps and isn't confising. If you're confused in any way, don't hesitate to ask for clarification.


Sep 13, 2009 | Zyxel P-660RU-T1 ADSL Ethernet/USB Router...

1 Answer

The orkut homepage/sign in page wont open and also facebook.?


Check if you have Spybot installed and if orkut and facebook name is in Host list (advanced interface)
Find your Host file: in XP is C:WINDOWSsystem32driversetc and open it with Notepad:
You get :
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost
# Start of entries inserted by Spybot - Search & Destroy
127.0.0.1 www.007guard.com
127.0.0.1 007guard.com
127.0.0.1 00 etc.
etc .....
....
If your required Website is the list remove it and save the host file.

Dec 25, 2008 | Microsoft Windows XP Professional for PC

1 Answer

Question


I just helped another person with what is sounding like a common issue, the only difference is they were reporting that the page would come up with page cannot be displayed and their home page had changed to a websearch page. It seemed to me that they had malware that was hijacking their preferences so I directed them to download the coolwebsearch removal tool from trend micro. I'll give you that link too, it's totally worth a shot because it's small and runs quick and it's better to get that possible problem out of the way. Download and run the program below, choose to fix right away as opposed to scan and if it tells you to reboot do it right away.
http://us.trendmicro.com/us/products/personal/CWShredder/

If it doesn't detect anything we're going to have to take the troubleshooting up a notch.
So if that doesn't fix it we need to see if another malware program is redirecting you so you cannot get to yahoo. Go to c:\windows\system32\drivers\etc and open the hosts file. A standard generic hosts file usually only contains this:
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost

There may be a few lines below the localhost entry but if you see any references to www.yahoo.com then we know you have some really bad malware and need to run a good spyware removal tool. For that I recommend Spybot Search and Destroy and Ad-Aware. I don't really trust anything else really.

If that doesn't work the last thing I can suggest is trying to reach the website by IP address. Go to start>run>type cmd then hit enter. In the command window type ping www.yahoo.com and it should return the IP address. Type that into the address bar in your web browser and hit enter. If it gets to yahoo then you have a DNS issue. Let me know if that is what happens and I'll send you the instructions to change the DNS address on your network card.

Jill

Nov 30, 2008 | Microsoft Windows XP Home Edition

1 Answer

Linksys Wireless-G WRT54G


Try the following on your router

1.) if internal firewall of router is activated, try to disable it.

2.) re-check your DNS settings in the router.

3.) Don't put as local ip address the IP address of the ADSL modem!

4.) Last but not least: if everything fails use static IP setup

Hope it helps...

jowunger

Jul 22, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...