What is the 3 digit remote code for the sharp 25vt-k100 tv? I need this code to work on dish network remote

Hi my name is Mike Houston of DISH Network and I see you arelooking for the codes for a Sharp VCR for a 301/311 remote. I will be happy to helpwith that and I will send a link to help with the steps, the codes for yourSharp VCR are 669, 727, and 746. You will need to press and hold the desiredmode button (TV, VCR, AUX) until all mode button back-lights come on, thenrelease. Then put a 1 and the three digit code for the corresponding equipment,the light will blink off after each digit is entered and then return to asteady light. After you enter the 1 and the three digit code press the #button. If the code entered is valid for the remote, the mode light flashesthree times.

Hello! My name is Becki, with DISH Network. If you have not yet programmed your remote, here are some steps and codes that should work. If not, please let me know!!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

619
765
700


Becki Barned
DISH Network Customer Service
[email protected]

Hello! My name is Becki, with DISH Network. Here are some simple steps to program the remote to the TV, adn the codes to do so. You only need a 3 digit code in this case.

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code


505
594
627
633




Becki Barned
DISH Network Customer Service

Hi deidrapleasmy name is Mike Houston of DISH Network and I was going over your post and thecodes for your 52" Sharp Aquos are 628, 739, 521, 629, 741, 679, 112, 605, 625,111, 608, 740, 526, 585, 607, 652, 654, 655, 658, 669, 670 and 674. I will sendthe link to help with the setup for the remote to TV. http://www.dishnetwork.com/SupportSection/remote-control

astoner3,

Our dish remotes are compatible with most TV manufacturers. On some older TV, we may not have codes that allow for full functionality for the DISH remote. I have provided the most common codes to work with the Sharp TV. The codes are: 628, 605, 740, 591, and 606. I have also provided instructions on programming the remote to the TV.

Remotes: Basic (Television Only)

1. Turn the Television On
2. Press and Hold the TV Power button for three seconds until the LED flashes
3. Enter the three-digit code using the buttons on the number pad.
4. Press OK. Note: The LED will flash three times.
5. Test functionality with the TV
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Ray Calo
DISH Network

You sure can, all you need is the RCA cables. it may not work very good but it shouldn't stop you from connecting it to the Sharp 25VT.
Just make sure you still have the Yellow/Red and White cable that came with the PS3, if you lost it or missed placed it, I am sure you can find one cheap on-line or any local electronic/video game store.
I couldn't find out if you have the RCA connections on the TV but from the pictures I found it looks like you have them in the front and it may only be the Yellow and white ones, but that should still work

try using a power scan:

1. Verify the remote is a DISH Network remote. Look for the DISH Network logo on the bottom of the remote and Mode buttons or lights at the top. Why?

We do have the codes for all DISH Network remotes and would be happy to help you with your DISH Network manufactured remote. Please contact the manufacturer of your remote for further assistance. Detailed instructions may be included in the owners' manual that came with your equipment. If not, there may be a toll-free technical support number listed.

1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate (about 3 seconds), then release.
2. For AUX mode Power Scan ONLY: press 0 for a TV, press 1 for a VCR/DVD, press 2 for any other device, then press *.
3. Press and release the Power button.
4. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
5. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
6. To verify the code works have the customer try several different functions for that equipment.
   
   

The codes for a Sharp are 526, 585, 591, 605, 606, 607, 608, 628, 629. Thanks for using Fix Ya.

try unplougging the tv and then put it back in again

The cable conmnector (F-connector) attaches directly to the tuner board. There is only the center connection and the ground connection. This is a simple repair for a shop but requires a bit of practice (you can't melt the inner insulator). The part costs around $2. Check with a local shop for their repair charge.
Dan