Question about Whirlpool 24 in. GU3200XTP Built-in Dishwasher

3 Answers

Some lights are flushing and the dishwasher does

Some lights are flushing and the dishwasher does not start

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 949 Answers

Hi,

If the clean light is flashing it is an indication of the water not heating up. I have attached a link to a sheet explaining what might be causing it and how to reset the control so you can use the dishwasher again.

Clean light flashing

If other lights than the clean light are flashing that is an indication there is a short circuit in the keypad control and that part would need replaced. Let me know if you need details on replacing that. If so I would need the complete model number from the tag on the dishwasher just inside the door.

Posted on May 02, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My Clean light is flashing and the dishwasher will not do anything....... the model I have is Whirlpool gold Mod#GU3Z00XTV02 Ser# FY3001238 Could you tell how to reset it Thanks

Posted on Jun 11, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My dishwasher will start to draw water but then stop. It does not fill up enough to run it

Posted on Mar 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I determine if my capacitor is blown out?


You'll need to disconnect the power to the dishwasher; know how to properly discharge a capacitor- they pack enough stored energy to cause serious injury and/or death. You'll need a digital or analog multi meter with an Ohm scale (resistance) or a higher end DMM that has a mFd (microfarad) and nFd (nanofarad) scales

Jul 05, 2014 | KitchenAid Kudc10Ixwh Flush Console...

1 Answer

I have a kitchaid dishwasher model KUDP02FR. When I press normal wash and heated dry, then start, the green light keeps flashing and will not start. Any suggestions? I had a repair man here in August for...


There are a couple of possible ways to reset the board. Pressing the keys HEATED DRY - NORMAL - HEATED DRY - NORMAL. I forget how many times, but all the lights should come on and it will do a diagnostic cycle.
It may work with the HI TEMP SCRUB, ENERGY SAVER DRY, HI TEMP SCRUB, ENERGY SAVER DRY keys depending on the machine.
I don't remember if the door is closed or open when entering the sequence. Try both.

Mar 27, 2017 | KitchenAid 24 in. KUDP02FRSS Stainless...

1 Answer

Hi, inlet/drain light flushes. checked for


Sometimes the error refers to where the drain pipe connects to the waste under the sink. It gets a build up of gunk over a few years. Just unscrew it and use a chopstick to see if it is blocked. Worked for me

Sep 03, 2010 | Miele 24 in. G692SC Plus SS Free-standing...

1 Answer

Added the wrong type of dishwashing liquid to my dish drawer!


start, fill and then select rinse only,,,as many times as it takes to flush out the soap...

Jun 11, 2010 | Fisher and Paykel 23 in. DD603H SS...

1 Answer

Pots and pans and normal lights blinking


That reset sequence code didn't work for me. We tried everything on a ton of forums.
What I did to fix our Whirlpool dishwasher was to disconnect the drainage tube from the garbage disposal. I noticed it smelled really bad so I figured it was clogged. I used a bucket to catch the water left in the tube. I took the sprayer from the sink and flushed out the tube. 4 pumpkin seeds and a couple of beans landed in my bucket. I flushed it a couple times. I hooked the tube back up to the disposal and sure enough all the lights returned to normal. I pressed start and it came on.

Feb 22, 2010 | Whirlpool GU2200XTSB GU2200XTSQ 24 in...

1 Answer

Washing Powder will not flush out well


Start by buying a box of brand name dishwasher powder like Electrosol or Cascade. Use only it, not a cheap generic powder.
Please post back here with the results of this step and we can take the next step if needed. But I bet the step above will take care of your main problem.

Apr 11, 2009 | Kelvinator MDB121RF Dishwasher

1 Answer

Whirlpool ADP 9520


press the start button (which is flashing) for a few seconds and it should start again?

Jun 09, 2008 | Whirlpool 24 in. ADP5966 Free-standing...

2 Answers

Flashing pot and pan light


shut off the power and see if the unit will reset. if its plugged in, it will be easy, look under the sink. if not, try a breaker.
let the power stay off for about a minute.
then back on.
if not restored, then you have logic boards that failed.
sorry,
good luck
mark

Oct 24, 2007 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool 24 in. GU3200XTP Built-in Dishwasher Logo

1,190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4340 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...