Question about Baumatic BTWM4 Front Load Washer

1 Answer

Baumatic washing machine not heating (BTWM4)

I've been having trouble with my washing machine not heating up.The heating element checks out OK .I've cleaned the pressure switch hose out.There is no electrical supply to the element when the machine should be heating.I'm not sure how to check out the electronic temperature control. Has anybody got any tips (the machine is 5 Years old and used every day is it worth repairing)
Many thanks Peter.

Posted by on

  • Anonymous Apr 16, 2008

    the water is not heating

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 185 Answers

Ohm out the element if it shows no continuty then replace it

Posted on Mar 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our new integrated washing machine (Baumatic btwm4) sometimes doesn't spin properly and clothes are very wet. Even thought a single spin is selected, the same poor result. The machine is definitel


1) tes the belt for broken or worn replace
2)test the door switch, this cause to NOT spindle the machine , replace if necessary or readjust
3)Main control module or CCU, if the door switch test o.k, tight any wires connector well from loose, otherwise the CCU is faulty.
4) motor control module, this receive signal from CCU, tight any wires connector for loose, otherwise you must replace the board faulty.
7_19_2012_9_02_27_am.jpg

Jul 18, 2012 | Washing Machines

1 Answer

I have no instructions on how to installa baumatic bwr 1206 wasing machine


Hope this helps :)

http://talkappliance.co.uk/downloads/?sa=view;down=103

Apr 23, 2012 | Baumatic BTWM4 Front Load Washer

1 Answer

Water do not drain from machine


the drain pump is either blocked or failed.check the filter.

Jan 11, 2011 | Baumatic BTWM4 Front Load Washer

1 Answer

All the cycles are working but the washing machine will not rinse the excess water left. I have tried to take out the filter but this is stuck and will not move so the water sits in the washing machine. ...


Do not run the machine until you have cleared the filter or you will burn the pump out. You need to keep working the filter until you are able to get it opened and cleared.

Dec 31, 2010 | Baumatic BTWM4 Front Load Washer

1 Answer

Water not draining


Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Sep 03, 2010 | Baumatic BTWM4 Front Load Washer

1 Answer

The washine machine finished it's cycle but there was smoke coming out of the drum and a burning rubber smell


The usual cause of smoke coming out of drum is that the heater element has come on or stayed on with no water in the drum
Try it on a spin cycle only, if smoke still comes out of drum, then could be a faulty pump, or main motor is burning.

Jan 20, 2010 | Baumatic BTWM4 Front Load Washer

1 Answer

Baumatic washing m/c btwm4


check that the drain filter is clear, if thats ok its probably going to be the electronic module at fault.

Nov 25, 2008 | Baumatic BTWM4 Front Load Washer

1 Answer

Baumatic btwm4 washing machine wont rinse and empty


If it wont empty its either a blocked pump/or filter. If it won't move on, heating element

Jul 11, 2007 | Baumatic BTWM4 Front Load Washer

1 Answer

Baumatic washing machine instructions


the twelve programs are explained on the detergeant drawer.if not i will post them for you.
to use the dryer turn the middle knob clockwise to the amount of time you desire upto 140 minutes then select the temperature on the far left knob and then depress the half load button your dryer should now work.

Jan 11, 2007 | Baumatic BTWM4 Front Load Washer

Not finding what you are looking for?
Baumatic BTWM4 Front Load Washer Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baumatic Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Bubba0157

Level 2 Expert

114 Answers

Are you a Baumatic Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...