Question about Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Dc07 model, cannot get it to stand fully vertical upright. It is as if something is not sliding back into position right. Don't want to force it in case something breaks. The upright of the cleaner has been dropped from time to time. Any thoughts on sorting it out?. Thanks a lot. M

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 438 Answers

Hi,

Try this quick repair and see if this fixes your Dyson in terms of not going in the upright position: This is a frequent problem that we see come in on Dysons. If this doesn't fix it, please feel free to just use the clarification request and let me know this didn't fix it.

Step 1.
Turn power off and unplug the machine.
Tilt the machine backward to a 45° angle.

Step 2.

  • Hold the section under the airway inspection pipe.
  • The black forward lock button must be held down simultaneously, otherwise the valve carriage will not move.
  • Pivot this section upwards until it clicks into place.
  • Release the black button once the valve pipe carriage is moved up into place.



  • dc07 model, cannot get it to stand fully vertical - 872ec6e.jpg dc07

    f5fcc76.jpg

    Step 3.

    • Tilt the machine forward.
    • The cleaner head should now slide underneath the part you have just cldc07 model, cannot get it to stand fully vertical - 20e76d6.jpgplace.
    • The machine should now stand upright.

    20e76d6.jpg

    Posted on May 03, 2010

    Ad

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
    click here to download the app (for users in the US for now) and get all the help you need.
    Goodluck!

    Posted on Jan 02, 2017

    Ad

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    2 Answers

    I have a DC07 model and it won't pick up or stand up


    Hi Dee, it's Jack at Dyson.

    It sounds like the valve carriage needs to be realigned. This is quick and simple to do - just follow the steps shown in the video below:


    I'm confident this will resolve the issue, but if you would like some further guidance from our experts you're welcome to give us a call on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

    Dec 04, 2014 | Dyson DC07 Animal Bagless Upright Cyclonic...

    1 Answer

    Cleaner not picking up


    Hi Barbara, it's Jack at Dyson.

    I'm sorry to hear the brush bar in your machine isn't rotating. Please make sure that the brush control on the cleaner head is set to 'Carpets' rather than 'Hard floors', as the brush bar will not rotate when the machine is set to the Hard floors position.

    Please note, the brush bar will never rotate when the machine is standing upright, so make sure it's reclined into the normal vacuuming position before testing it. You might find our online Support guide useful when troubleshooting:

    http://www.dyson.com/support/dc07/dc07-animalus/diagnosis-root-menu/flo-dc07-gen-i-can-see-something-wrong-visual/i-can-see-something-wrong-visual/redirect-to-flo-dc07-clutch-does-the-brushbar-turn-with-the-power-on/flo-dc07-clutch-does-the-brushbar-turn-with-the-power-on

    If you're still concerned about your machine after you've given this a try, please get in touch with us directly so our experts can provide some further advice. You can reach us on 0800 298 0298 (UK), 1-866-693-9766 (US), or 1-877-397-6622 (CA).

    Best wishes,

    Jack
    Dyson Online Customer Support
    www.dyson.com

    Nov 17, 2013 | Dyson DC07 Animal Bagless Upright Cyclonic...

    1 Answer

    Dysondc07 will not move from the standing position


    The most likely cause is something is stuck in the valve that switches the airflow from the floor to the tools as you pull the handle back.

    Sep 30, 2013 | Dyson DC07 Bagless Upright Cyclonic Vacuum

    1 Answer

    Vacuum will not go into the upright position


    Hi there,

    I'm sorry to hear you're having difficulty standing your DC25 Animal upright. From what you've described, it sounds as if the stabiliser pedal needs to be realigned. This is easy to do - please follow the steps shown in the video below.

    If you'd like any further assistance or advice, please give our customer Helpline a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

    Best wishes,

    Jack
    Dyson Online Customer Support
    http://www.dyson.com

    Apr 07, 2012 | Dyson DC25 Animal Bagless Upright Vacuum

    1 Answer

    The vacuum won't stand back up. it's stuck down.


    looking at the front off the machine... ON the left hand side there's a black button... Push in in the slide the plastic behind it towards you... it should clip into position and the vacuum should stand up again,

    Oct 03, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

    1 Answer

    Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the...


    Hi its Darran at Dyson.

    The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the machine switched on and upright and when you are using the hose.

    If the brush control should be in the centre position and move forward to the "on" position when you release the head. If it is not doing this, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US).

    Kind regards
    Darran
    Dyson Customer Service

    Feb 22, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

    2 Answers

    Dyson 28 handle is stuck in the locked and upright position. Vac runs fine, just can't get the handle to release to run the vac


    On the lower right side of the body of this model is a air duct piece that can get stuck and won't allow you to use the release. Take out that piece and put it back on again to see if that will unlock it.

    Nov 30, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

    1 Answer

    Dyson dc07 will not lock into upright position


    - Stand behind the vacuum cleaner and look at the right-hand side wheel
    - Remove the AI PIPE (it has two purple buttons that you push together to lift it up and out - it looks like a Tuba)
    - Lay the handle down and look for a black button that will be exposed in front of the square hole
    - Stick your index finger and middle finger into the vacant AI Pipe Hole (the square hole)
    - Reach over with your thumb and press the black button in front of the square hole
    - Whilst pushing the black button, lift your index finger and your middle finger and move the gray plastic piece up (lift the square hole basically)
    - Remove your fingers from the square hole
    - Lift the handle and stand your machine back upright again
    - Place the AI Pipe back into the square hole

    Jul 12, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

    1 Answer

    My Dyson DC07 will not stand upright. It just lays in the recline position.


    - Stand behind the vacuum cleaner and look at the right-hand side wheel
    - Remove the AI PIPE (it has two purple buttons that you push together to lift it up and out - it looks like a Tuba)
    - Lay the handle down and look for a black button that will be exposed in front of the square hole
    - Stick your index finger and middle finger into the vacant AI Pipe Hole (the square hole)
    - Reach over with your thumb and press the black button in front of the square hole
    - Whilst pushing the black button, lift your index finger and your middle finger and move the gray plastic piece up (lift the square hole basically)
    - Remove your fingers from the square hole
    - Lift the handle and stand your machine back upright again
    - Place the AI Pipe back into the square hole

    Jul 08, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

    1 Answer

    My dc07 won't **** up on carpet unless it's almost fully upright


    likely theres dirt on the pivots, try cleaning them ,but be very carefull taking it apart, they break easily and theres virtually no repair parts out there
    next time around, get a panasonic

    Nov 21, 2008 | Dyson DC07 Bagless Upright Cyclonic Vacuum

    Not finding what you are looking for?
    Dyson DC07 Bagless Upright Cyclonic Vacuum Logo

    247 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dyson Vacuums Experts

    AskDyson
    AskDyson

    Level 3 Expert

    2572 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18408 Answers

    Samyfam
    Samyfam

    Level 3 Expert

    379 Answers

    Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...