Question about Samsung CLP 315 Laser Printer

4 Answers

Papr Jam, Samsung CLP310 - paper jams half way through the job

Samsun CLP-310 paper jams half way through printing a print job. Using 80gsm paper

Posted by on

  • timhall335 May 23, 2010

    The problem appeared to be a censor taht monitors the paper flow, All fixed now

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

If it jams every page, it is the infamous Samsung design flaw. There are dozens of reports of this problem all over the internet. The best solution: sell it or otherwise get rid of it ASAP and buy another type or model of printer. The 2nd best solution: call trained technician and ask to replace the broken part. It could be thermistor near fuser, some people say it is a photo-interrupter.

Posted on May 05, 2010

Testimonial: "Thankyou"

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Whats happening is the feeder is slipping and not pulling the paper through the printer.. take the paper-tray out completely then use some "nail polish remover" on a cloth and apply it on the rubber band that you will see at the bottom/back. Just make sure that you unplug the printer before you do that just for safety precautions.
The rubber will become tacky again and so happy printing.. if this happens again in a few months do the same. Mine has bee working for the last six months now.

Good luck!!

Posted on May 22, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 57 Answers

This is a common problem but fix the printer, don't sell it! This is likely the exit sensor. Go see this video on YouTube: 5fJHykzkfww

Then go to eBay and get the part for about $10. It's a simple 15 minute fix and the video shows how to do it.

Posted on Apr 26, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 304 Answers

Pull the paper safely.

Posted on May 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung CLP-310 printer shadow printing on second half of page


I would check that the tension between your fusing rollers is ok as the toner will come off the paper and than return back to paper on its next revolution causing a faint image further down the page

May 19, 2012 | Samsung CLP 310 Laser Printer

2 Answers

My Samsung CLP 310 is having paper jam issue; it prints half and then gets jammed halfway; opening and closing the front panel sends the paper out but upper half of the paper prints ok but lower half shows...


You'll probably have to replace that exit sensor. Cleaning might not do it. Go to YouTube and watch this video: 5fJHykzkfww

You can get the part on eBay for about $10 and it's a fairly simple 15 minute fix.

Sep 02, 2010 | Office Equipment & Supplies

1 Answer

My samsung clp 310 printer jams when printing cardstock.


I have the same issue. Printing envelopes produce unexpected noise (on real envelope or standard paper) during the proses. Printing the same document as an A4 document ran smoothly and quietly. Any solution :(

Aug 05, 2010 | Computers & Internet

2 Answers

Samsung clp 310 printer regularly jams


Hi,

if your printing is halfway to the exit. it is most likely the exit sensor is mulfunction.

get the exit sensor replace.

May 14, 2010 | Samsung CLP 315 Laser Printer

3 Answers

My Samsung CLP 315w refuses to print a whole A4 page. Stops half way then message comes up paper jam but when I open back / front, paper not jammed and when I close it document continues printing then...


Hi,

most likly hood is your exit sensor is faulty. The printer work in this way. if it does not print out all the document. it will print again. that is why you kept getting this same issue after a jam open and close door it will print again.

replace the exit sensor it will help.

Apr 16, 2010 | Samsung CLP-315W Laser Color Printer

1 Answer

My Samsung 310 printer is giving a paper jam message inside warning when I turn the printer on and yet there is no paper jammed inside. Cannot print. Been working fine before. Mayb 100-150 pages printed...


Chek paper size (A4, letter...etc)in driver options and compare it whit your file settings (fo example - you trying to print something whit paper size A4 but printer expect letter format...etc)
Clean paper feed roller

Apr 08, 2010 | Samsung CLP 315 Laser Printer

1 Answer

I cannot get the Samsung CLP-310 color laser printer to print on glossy card stock (business cards). I have tried putting just one page in the paper tray. The printer starts to take it and then I get paper...


Printers are only able to use paper that is within their thickness threshhold. Simply put, the stock you are using is too think for your printer. Try getting some thinner paper and see if that works

Jun 16, 2009 | Samsung CLP-315W Laser Color Printer

1 Answer

CLP300 not picking up thicker paper


this printer only supports up to 120gsm paper,any thing thicker will get jamming errors

Jun 12, 2009 | Samsung CLP 300 Laser Printer

2 Answers

Samsung CLP-315 prints half a page and then stops & jams. Interior is clean. Our CLP-315 is doing the same thing. Only had it 6 months. The paper stops printing half way through and you have to open the...


Hello,

It sounds like your fuser is causing the jame,.

when you remove the paper can you wipe the toner off the page or does it adhear to the paper ?

If it does not the fuser is causing the jam, if the toner does not wipe off the paper then the feed tires would be the cause of your jam

The fuser is at the back of the printer and will be very hot, so be careful.

May 26, 2009 | Samsung CLP-315W Laser Color Printer

1 Answer

Looks like toner is not sealed to the paper.


the machine is only designed for 80gsm paper. you can change paper type through printer options in printer manager to card stock. it wil probably not work though as it is really only designed for 80gsm paper. the toner need to be heated to 200oC inorder to fuse to the paper cardstock absorbs less heat than normal paper.

Jan 03, 2009 | Samsung CLP 300 Laser Printer

Not finding what you are looking for?
Samsung CLP 315 Laser Printer Logo

2,147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

Victorman
Victorman

Level 3 Expert

824 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...