Question about Televison & Video

2 Answers

I have a ge universal remote and a honeywell tv. i cant find honeywell codes anywhere

Posted by on

  • 1 more comment 
  • mikehaine325 May 01, 2010

    ge remote rc24912

  • mikehaine325 May 01, 2010

    answer ?

  • mikehaine325 May 01, 2010

    i have a honeywell tv and a ge rc24912 remote. i need a code.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Hi.

You need to use the code search function. Honeywell TV codes for GE remote are not known.

To program the remote do the following:

Step 1: Turn on the equipment you wish to program.
Step 2: Press and hold "CODE SEARCH" or "SETUP" until the light turns on, then release.
Step 3: Press and release the button for the device you are programming (VCR, DVD, TV etc.). The indicator light will blink once, then remain lit. For AUX, press AUX then the device button you are assigning to AUX.
Step 4: Press and release the "POWER" button until your device turns off. Wait at least two seconds between each time you press "POWER". Note that you may have to press "POWER" up to 250 times!
Step 5: When your device turns off press the "ENTER" or "SAVE" button. The indicator light will turn off. Check other functions to see if your code is correct.



Posted on May 02, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

Tell me the Complete Model Number of the Remote, so that i could check whether it is Compatible with this Brand or not.

Note - These are known as Universal Remotes, however, would be Outdated after 2 - 3 years of manufacturing. Common Example - When they were initially Used covered Few Brands and have 3 Digit Codes, then come 4 and now it's almost 5 with Most of the New Universal Codes.

Let me know,so that we could Proceed.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you program it to a GE universal remote


these are the codes
LG: 004 005 009 012 050 057 080 156 227 338

  • How to Program a GE Universal Remote ' Techwalla https://techwalla.com/content/program-ge-universal-remote Lost your Remote? Need help programming your GE Universal Remote? Most TV's, VCR's, DVD Player's, Cable and Satellite Boxes will work with a GE universal...
  • How to Program GE Universal Remote: Quick Steps www.brighthub.com > Electronics > Home Theater > Home Media 2011-04-18 · How to Program GE Universal Remote Using the Code Search Function. If you've tried the codes listed for your device brand and are unable to get your ...
  • GE Universal Remote Codes and Instructions ' direcTutor www.directutor.com/content/ge-universal-remote-instructions Goto GE remote Codes. Direct Code Entry for GE remotes with 4 digit codes. 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
  • How to Program a GE TV Remote ' Techwalla https://techwalla.com/content/program-ge-tv-remote GE universal remote controls allow users to program multiple devices onto a single remote. The remote control uses codes to detect the device, and you can...
  • GE Universal Remote Quick Start Guide - YouTube Youtube
    • BY JASCOPRODUCTSCOMPANY
    • 3 MIN
    • 216K VIEWS
    2013-04-18 · Video embedded · http://www.jascoproducts.com Eliminate remote clutter with GE Universal Remotes
  • How to Program a GE Universal Remote Control ' eHow www.ehow.com > Tech > TVs > Remote Controls
    • BY EHOW ELECTRONICS EDITOR
    Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are ...

  • May 09, 2016 | LG "32"" inch New 2011 HD LCD TV With HD...

    1 Answer

    I have a GE Universal remote but i cant find the code for my Hatachi ultravision. Where do i find the code


    Which GE remote do you have (some use 3 digit codes and others use 4 digit codes)? Try here for a list: http://www.jascoproducts.com/support/universal-remote-codes.asp .
    Please note if the remote was programmed less than 6 months after your TV came on the market or is older than the TV, the codes for your TV are probably not included. There is a lag from release of a TV to the codes getting to a universal remote company.

    I hope this helps.

    Cindy Wells

    Sep 22, 2010 | GE Televison & Video

    2 Answers

    I have a ge universal remote model #24110R need tv code


    http://www.jascoproducts.com/support/universal-remote-codes.asp

    Apr 07, 2010 | Universal Remote Control GE174Universal...

    3 Answers

    Mitsubishi TV and GE 3 Universal remote code needed!!


    http://www.xdiv.com/remotes/ THIS SITE HAS ALL THE CODES FOR UNIVERSAL REMOTES JUST LOOK FOR THE REMOTES BRAND AND CLICK ON IT IT SHOULD GIVE YOU THE CODES FOR IT.

    Jan 11, 2009 | GE RM24912 Universal Remote Control

    1 Answer

    Remote


    Hi

    You may need re-program the Universal Remote by following the correct instructions. Enter the code accordingly. For Sanyo TV You can use one of following codes
    004, 012, 049, 097, 108, 110, 180, 268
    You can obtain the User's Manual with code list from the link below

    http://www.expressfix.net/manuals/remotes/GE-JASRM24912

    Aug 29, 2008 | GE JASRM24912 Remote Control

    1 Answer

    Universal remote


    Click Here
    For the 4 digit Universal Remote Code List From GE (suppose to work with all GE Universal Remotes as long as they use 4 digits to program.)

    Click Here
    For the 3 digit Universal Remote Code List from GE (uses 3 digits to program, unless the remote was purchased before August of 2002)

    Click Here
    For the 3 digit Universal Remote Code List from GE if your remote was purchased before August of 2002.

    Oct 28, 2007 | Televison & Video

    3 Answers

    In need of tv codes for ge romote control


    You don't need a code. Just follow the instruction as follows:
    1. Tun on TV
    2. Press and hold "code search" until light stays on, then release.
    3. Press TV botton
    4. Press on-off repeatedly until TV turns off
    5. Press enter.

    That is it. It works for me.

    Oct 22, 2007 | GE JASRM24912 Remote Control

    5 Answers

    ETEC REMOTE CONTROL MODEL RC5


    GE TV CODES ARE 045,002,018,003,007

    Oct 02, 2007 | Televison & Video

    Not finding what you are looking for?
    Televison & Video Logo

    Related Topics:

    52 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    74106 Answers

    Cindy Wells

    Level 3 Expert

    5100 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    Are you a Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...