Question about Samsung HL-R5678W 56" Television

1 Answer

DLP no image at time - no chime - lamp light blink but no image - sometime 3 front panel lights blink

I have a Samsung HL-R5678W DLP TV.
Recently the TV developed a problem.

While changing source, the TV screen will go blank although you can see the lamp on at the back.
Sometime the problem is seen from the get go, no image, the lamp is on at the back, the TV won't turn off, the front panel lights will be off, no sound, no display on the screen.
You power off and then the green lamp light indicator at the front will blink and goes off but after couple of seconds no images on screen and no channel changing, the power off won't turn the TV off, changing the source does not seem to work (no sound on any channel although there is some being broadcasted on some channel).
I have seems by 2 times the 3 front panel light blinking indicating a bulb replacement but then this error does not reproduce all the time.
Yesterday, my wife and kids watched TV all day (I told them not to turn off the TV and not to change chanel), I turned it off at night when going to bed and this morning no image again although lamp light at the back is on.
This morning I noticed that the lamp light never turn off yesterday when I powered off the TV, I unplug the TV power and power back the TV, green lamp indicator light comes up on front then goes off but no image still and no power off from remote or front panel button,

This is driving me nuts, please help, would like to know what could be wrong and how much it might cost before bringing in a tech,

Thanks
Laurent

Posted by on

  • Anonymous Feb 10, 2009

    My TV won't have any picture or sound but it click when turned on. When I try to turn on the green comes on then a second it goes red light then goes lamp blinking. please help me troubleshoot before it cost me big bucks. thanks. wega sony 42'

  • Anonymous Apr 28, 2009

    Same thing. Troubleshooting on site says 'power management issue' and wants me to contact the nearest tech, 60 miles away!

×

1 Answer

I have the exact same issue.
have you found the cause?

Posted on Apr 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung HL-R5678W DLP TV that is acting up. When I first turn it on everything works, after 5 minutes it shuts itself off. After 2 minutes it will come back on without sound. It will do this a...


U turn tv on hear any squiling,grinding or motor noises?Picture show up before it shut down picture have flashes of black&white within the picture?Yes,to all of these,this tv have a colors wheel and it dead,require the colors wheel replacing.No,none of these problems.The tv projection lamp,if in this tv like a 1 1/2 or 2 years,tv ben on an watches like 4 or 5 hours a day?The "LAMP" LED light indication lite up or flahes,the projection lamp life is over.Require a new projection lamp.

Oct 22, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung tv model# HL-S5679W all three lights on front panel blink, no pix or sound owner's manual says lamp may be defective this is a DLP-LED. No conventional single lamp


The "lamp" in this set, I think, is called the "DLP" in the parts listings. That part is number: 4719-001960 and can be purchased from tritronicsinc.com for $249.75 plus shipping. Use the guest account to access this info.

Hope this helps,
Dan

Feb 17, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

My samsung dlp tv intermittently just shuts off...don't know if it is because of the lamp or what


When it shuts down, do the LEDS on the front blink? There are 3 of them. Standby, temp and lamp. Do any combination of the 3 blink when shuting down. I could tell you where to start just by those lights blinking.

Dec 23, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

I own a Samsung HL-R5067W 50'' DLP. Set is about 3 years old. Recently I heard a loud pop while viewing, picture distorted, but never went blank. I turned set off. When turned on again a loud whining noise...


Check your color wheel. There is a DIY guide for replacing the color wheel. Mine did the same thing yours is and my color wheel was all busted up. Unfortunately after replacing the color wheel my set continues to do the same thing, but this could mean I need to replace the ballast as well.

Sep 20, 2009 | Samsung DLP HL-P5663W 56" TV

3 Answers

Samsung DLP TV time, temp and lamp lights blinking... won't turn


Les,
I'm not a TV repair guy but my owners manual states that when all three LED's or lights on the front of the TV are flashing, that the lamp needs to be replaced. Might want to look into this. Good luck!

Greg

Aug 30, 2009 | Samsung DLP HL-P5663W 56" TV

2 Answers

Samsung hl-r6178w 3 blinking lights


The power board ic converter is dead.
U can tries to go to the web buy the part and replace it yourself.Or hire the repair man part and labor $575

Aug 13, 2009 | Samsung HL-S5087W DLP TV

1 Answer

Samsung dlp turns on for few seconds and shuts off


lamp shuts off first..with sound still on and black screen.then turns off and has three blinking lights on front panel.

Jan 10, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung 56" shuts off after 5 or 10 seconds see a checker board image before shutoff


When the set shuts down you need to see what lights are blinking. For example: Timer/ Temp/ lamp on the front panel. You should also count the number of times they blink and the sequence. Most DLP`s give an error code alerting the technician to check the balast, lamp, or fan etc. for malfunctions. Unfortunately I can not tell you exactly what is wrong given the current information. Howrver, the last Samsung I repaired for shutting down had a bad light engine.

Nov 29, 2007 | Samsung DLP HL-P5663W 56" TV

Not finding what you are looking for?
Samsung HL-R5678W 56" Television Logo

894 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...