Printer "stuck in copy mode"?

IN MY HOME

Try this:

To reset waste ink counter:
Press Menu-Scan-Copy-Scan to enter service menu.
Use arrow keys to scroll to "Service menu counter access".
Press OK.
Use arrow keys to scroll to "ABS-M DOT COUNT"
Press Copy.
Use arrow keys to reset count to zero.
Press OK.
Press Stop/Reset.


OR


Reset for mp130
turn on the printer press menu
press scan, copy, scan to enter service mode
use> to get to nvram
set ABS-M level to 0
Set ABS-P level to 0
Press stop to exit..........Done

i hope this help

Take the printer to a qualified printer technician.
He/she will empty the waste-container,
and "reset" the electronics inside the printer,
to tell the printer that the waste-ink container has been emptied.

Click on start control panel then printers
If your printer is listed right click on it and check to see if says working ok if not try re-installing the driver
Or check that the driver and software is suitable for your OS go to the canon website then support thenput in your printer model and download the latest driver and software for your OS
install it and then plug in your [rinter it should find the new hardware and install the driver

The print head is clogged.
Try powerful cleaning:
Press menu, then start black copy, then four times arrow-up quickly after another.Machine will be in maintenance mode
(all lights will flash).
Press 7-6-4 and OK (or start-black-copy).
When finished press 7-6-3 then start black copy,
printer will do a power purge.
Leave maintenance mode by pressing 9-9.
If this not help better think about new printer, because cost of repairing this one is profitable.

Powerful cleaning is: Press menu, then start black copy, then four times arrow-up quickly after another.Machine will be in maintenance mode (all lights will flash).
press 7-6-4 and OK (or start-black-copy).
When finished press 7-6-3 then start black copy,
printer will do a power purge.
Leave maintenance mode by pressing 9-9.
If this not help better think about new printer, because cost of repairing this one is profitable.

Hi

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

hi dorirn


have a look here this should help you solve it.HP Photosmart 2610 All-in-One Printer



riz.

Hi

Try to turn it off and unplug it for a few minutes, turn it back on and leave it to copy mode. try printing from the computer then/ keep us posted.

Thanks

You will need to contact HP at the support number they provided, tell them that you have a US region printer and need it reset to the UK. The cartridge numbers are different and a US region printer will not accept UK cartridges.

They can do the reset over the phone and there should not be any charge for this. You will need to be at your computer as they will need to have you send some commands to the printer. The reset procedure is not available through the online chat.

This will only need to be done once, after the reset procedure the printer will properly accept the UK cartridges (but no longer accept US cartridges....).

Regards,
Bob Headrick, MS MVP Printing/Imaging