Question about Garden

Open Question

I have a Craftsman Professional 20V Cordless Sabre Saw (Model 320-28127) and (by mistake) unscrewed the rotate bushing instead of the proper lever to change a blade. It came off the plunger shaft along with the torsion spring and I cannot get it back on. Will this require major disassembly? I will do what is necessary, but don't want to do more than is required. Thanks.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

efs_perpends
  • 1996 Answers

SOURCE: bevel locking lever won't tighten

It looks like that handle should be able to pull straight off the end of the shaft once you remove the screw. See this exploded parts view: http://www.makita.com/en-us/Assets/images/Products/_PartsBreakdowns/PB_2703.pdf

My experience with them is that people tend to get frustrated and abandon the lock lever and just run the saw "loose". Scary as it sounds, I've seen it on more than one site.

Anyway, I don't have a fix for you if you can't get the handle off to re-position it.
Makita does have a tech support line if you want to give it a try. Otherwise, you may have to shell out a few bucks to one of their service centers. We used to have a great one in Albuquerque, but it's now defunct. People don't seem to repair tools like they used to...
Locate Nearest Service Center online
or Free technical support center (1-800-4MAKITA)
Monday – Friday 7:00am – 7:00pm EST
Good luck, and best wishes...

Posted on Mar 28, 2009

rowdy45176
  • 2176 Answers

SOURCE: dewalt recip saw 307m no longer holds saw blade. I

I would go to Dewaltservicenet.com and type in your model number on the page and it should bring up a schematic that you can download and see where the part goes. Let me know if you have trouble finding it, if so I need the exact model number.

Posted on Jul 20, 2009

dontbother10
  • 2220 Answers

SOURCE: I just bought a replacement chain saw blade for my

Take it back to where you purchased it or contact them by email/phone and explain your problem (have saw in hand). Together you can solve this. We cannot find the model number on your saw from here. GL
Lou

Posted on Sep 14, 2009

johnegan84
  • 73 Answers

SOURCE: require assembly schematic for shimano dura ace

log onto Shimano.com, it is probably the limit screws (the two screws that limit travel) or you have a faulty ratchet in the lever, try the shimano website anyway they have great tutorial and manual support

Posted on Mar 27, 2010

dontbother10
  • 2220 Answers

SOURCE: Craftsman electric chainsaw model 315.34410 leaks

A parts breakdown for your saw follows:
http://www.searspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=31534410&productCategoryId=1503210&brandId=0247&modelName=ELECTRIC-CHAIN-SAW&diagramPageId=00001&documentId=00024034&pop=flush&searchCount=1
You can use it as a disassembly guide to attempt to find the leak. I fear from your description the reservoir has ruptured, it is NLA. Almost no parts are available for this saw. Maybe time for a replacement. Consider a name brand, someone you expect to be in business 10 years from now when a quality saw needs repair parts.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Posted on Apr 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a blade clamp for a model 105112 Mastercraft jig saw. Is there a substitute or universal clamp that fits?


Jig Saw Parts ' Tool Parts Direct

www.toolpartsdirect.com/saw/jig-saw.html
  1. Cached
  2. Similar
Shop online for jig saw replacement parts for fourteen of the world's most trusted brands at Tool Parts Direct. We have the largest online inventory of Bosch jigsaw parts, Dewalt jigsaw parts, Black and Decker jigsaw parts, as well as replacement parts from other top manufacturers ...

mastercraft jig saw model 105112 Questions & Answers (with Pictures ...

www.fixya.com > Forum > Tags
  1. Cached
  2. Similar
Find solutions to your mastercraft jig saw model 105112 question. ... i need a parts list for a mastercraft jigsaw/sabre saw model 105-106 See this webpage: ...

Craftsman Jig Saw Parts ' Great Selection ' Great Prices ...

www.ereplacementparts.com/craftsman-jig-saw-parts-c-158286_171667.html
  1. Cached
  2. Similar
Repair Parts Home Power Tool Parts Craftsman Parts Craftsman Jig Saw Parts. ... 07021 Craftsman Sabre Saw Parts. ... 315171600 Craftsman Sabre Saw 1/2 Inch Stroke Variable Speed Parts. 105112 Mastercraft jig saw Google Search

Nov 23, 2016 | Saws

1 Answer

Need manual sabre saw model 900.272510


That's a discontinued Craftsman model.
If you need replacement parts, you'll probably find that parts are difficult to find and way overpriced from Sears.
I'd check into used saber saws on CraigsList.

I needed a blade hub for a worm drive saw for a Craftsman saw and they wanted $46 and it would have to be ordered. (Its a flanged spacer that has the diamond shape that fits in the diamond knock-out in the blade.) The exact same part was used on several other brands including Milwaukee, Hitachi and Bosch. I bought a Bosch one from a local tool store for under $7.

Oct 18, 2014 | Saws

2 Answers

Where to lubricate fan


What type of fan do you have? If it is a desk or stand fan, you need to add oil to the front bushing/armature (accessible by taking off the fan blade) and to the rear bushing. To reach the rear bushing, you need to take the motor cover off - pull the oscillator push-pull lever up until it disengages, then using a phillips screw driver, unscrew the retaining screw of the motor cover. When the cover is out, you need to unscrew 3 retaining screws on the oscillator assembly at the back of the motor. When the oscillator mechanism is out, you will see the motor armature at the back of the motor (has a threaded end). Add a little oil to the bushing of the armature. Then reassemble (reverse order - secure the oscillator assembly with 3 screws, install the motor cover and screw the back, insert the push-pull lever and you're done). Hope this may help.

Jun 27, 2014 | Dryers

1 Answer

Have a Craftsman sabre saw, model #315.17280 with a defective switch. Switch part is #63896. Where can I locate a new or used switch??


THE ORIGINAL PART IS NOT AVAILABLE ANYMORE, THERE ARE SOME SWITCHES THAT SHOPS ARE LISTING AS REPLACEMENTS. BE VERY CAREFUL WITH REPLACEMENTS, ELECTRICALLY THEY WILL WORK, BUT THERE MAT BE A FIT PROBLEM. GOT LUCK. I HAD TO USE A COMPLETELY DIFFERENT SWITCH MOUNTED IN A RECEPTICAL BOX ON THE TABLE LEG.

Aug 01, 2013 | Craftsman 120 Amp Reciprocating Saw Sabre...

1 Answer

Setting the proper tension on a Craftsman 10" band saw model 124.214000.


Hope this blog will help you http://bandsawblog.com/blade-tension/ .
What's your band saw blade? I am using Haltbar blades and never got problems tensioning.

Feb 11, 2013 | Craftsman Saws

1 Answer

Milwawkee sawzall rotated shaft


If this is an older sawzall there is a bushing in the back plate that aligns the spindle. There is a service fixture for proper alignment. If this is a newer one you have a problem also in the gearcase that would need to be looked at. You can go to milwaukeetool.com and with your model number and serial number download a schematic for this tool . Let me know if you need more assistance and if you do I would need the model and serial number also.

Jan 09, 2012 | Milwaukee Tool Milwaukee 10 Amp...

1 Answer

Craftsman radial arm saw will not cut straight. Even when I line up the blade with a square and try to cut a piece of wood with a straight line it cuts at an angle or a bevel instead of straight. Any...


All of the adjustment locks should be tight. Check the arm and saw motor cradle for looseness by trying to push/pull the blade, cradle, and arm in various directions. A bevel cut indicates that the motor/cradle is tilting. An angle cut is controlled by the rotation of the arm. Check for looseness of the cradle bearings that allow the cradle/motor to roll along the arm. If you don't have the owner's manual for this saw, go to: www.searspartsdirect.com and enter the complete model number minus the decimal point--this will take you to a series of drawings that detail every replaceable component of the saw. The owners manual should be available there. There is a rather involved series of adjustments involved to make this saw work correctly. Hope this helps!

Jan 05, 2011 | Craftsman Garden

1 Answer

Craftman sabre saw manual model 315-172100 or copy of original ok


Go to sears parts website and it guide you through to enter your part number and it will show you a parts diagram and how to order as well

Jun 14, 2009 | Craftsman Saws

Not finding what you are looking for?
Garden Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

11057 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...