Question about Computers & Internet

4 Answers

I am trying to activate a San Disk RescuePro Delux program. I am being asked to type in a Serial number into a 5 window blank. In looking at the installation disk I can find two series of numbers that are three sets each and nothing else that even looks like a serial number that would fint into six blanks. I need to activate this program today if possible. Can anyone help me find these elusive numbers?

Posted by on

  • 4 more comments 
  • timeless_ima May 01, 2010

    Sir:



    You still haven't answered my question. I have no paper work that came with this recovery disk. IF the serial number was contained on a piece of paper that housed the disk it is LONG GONE!!! ThereforeI need to know how I'm supposed to activate the program without having the original seiral number. I already knew I needed a seiral number to do so. I CAN read and that's what the instructions told me to do. However, I'm at an impass and I need this program to recover some valuable images from the 8GB disk. Can you provide a generic number that will open the program or not?

  • timeless_ima May 01, 2010

    Sir:



    I have tried all of the combinations of numbers that you sent with NO success. The program claims the serial number is INVALID.

  • timeless_ima May 01, 2010

    The request number for this item is: 2011221806 if that helps you find the proper serial numbers.

  • timeless_ima May 01, 2010

    Dis your receive my latest email regarding the unworkable serial numbers?



    Al Derickson

    Timeless images

  • timeless_ima May 01, 2010

    Shaa,



    My system is indeed San Disk Utility. So far the serial numbers you have sent have been rejected by the system as being invalid! What should I do next?

  • timeless_ima May 01, 2010

    Received the recovery Disk, SanDisk Rescue Pro Delux when I purchased an 8GB Extreme III Compact flash card. The program was loaded onto my comuputer and never activated. Today I needed to activate the program to retrieve some images. A serial number was requested to complete the activation. It appears that the number was on a part of the paper work that was accidentally discarded. Without that number the program is no good. I have tried for several hours to obtain a serial number or a generic one that would allow me to register the software from an expert who identifies himself as Saa or something like that. He has provided me with 4 separate numbers that come up invalid. I can't get him to answer my last communication with him so I am asking for someone else to communicate with me to see if this issue can be resolved. My nickname is: timeless_ima and my password is 15ef8.

    Thank you.

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

One thing I would suggest, try bittorent to get what you need for these serials. I cannot provide more information as we may be breaching copyright laws. Google search for bittorent and you will understand what I am talking and how to get these files.Good luck.

Posted on May 02, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

According to their site
http://www.lc-tech.com/software/rprodetail.html
this is an electronic delivery product (it means that you must download it from them, it doesn't come as an install disk). The serial number is included in your receipt/message. There is something wrong here.
Use this instead  
http://www.softpedia.com/get/System/Back-Up-and-Recovery/smart-recovery.shtml

Posted on May 01, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,354 Answers

Go to folowing site and read carfully software instrctions

http://www.lc-tech.com/software/rprodeluxedetail.html

Posted on May 01, 2010

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Contributor
  • 1,070 Answers

Hell Sir, If you Purchased this Program There will be Serial Key to Enter in that Blank Field.Serial key will looks like Serial number :RPRID-0400-5623-12808-23806.You just Enter that Serial Key in Blank area to Register your Program You are Done..
You may Feel Free Contact ME to get More Help...Thanks for Contacting FixYa...

Posted on May 01, 2010

  • 7 more comments 
  • shafi
    shafi May 01, 2010

    Yes here is what you needed...Click here(Download file ;Choose Free Download)......


    I like to know feedback...Thanks for Using FixYa......

  • shafi
    shafi May 01, 2010

    I had Given to you Serial Number ...Can't you enter Those Number Given to you...it can be available by Downloading Previous Post......This Should be Help you...This already worked for me....

  • shafi
    shafi May 01, 2010

    If any problem Comment/post me here...(Download link is VERY SECURED..NO Virus..)and make Vote to continue Helping....

  • shafi
    shafi May 01, 2010

    If you going to Rapid share link as above Given Click Free Download.You will get an image Containing Serial number.If that not worked ,Inform me...By posting here....

  • shafi
    shafi May 01, 2010

    OR click here SURELY SOLVED key here.......

  • shafi
    shafi May 01, 2010

    Could you Specify Version here if not Work....Mostly hope it will work for you...Anyway Reply result here...Keep Using

  • shafi
    shafi May 01, 2010

    Sorry there was Happened a mistake When giving Serial Through Rapid share ..Ignore it..and Use last link...RATE if Helped ...

  • shafi
    shafi May 01, 2010

    Which Version you Using...???


    Is this you have ......










  • shafi
    shafi May 01, 2010

    I think it might be Version mismatch Program you Using...Do you Want to get the Version using by me..


    4 Serial key I gave to you..Right....Just Try after Restart...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to remove Windows 7 password to let Toshiba laptop boot from hard drive successfully?


Windows operational system locked always leads to Windows 7 not boot from hard drive completely. Actually, that just need you type correct password to login Windows 7. However on this occasion, only password reset disk or password recovery could help us remove locked Toshiba Windows 7 password.

1. Remove Windows 7 password with reset disk
When you type incorrect password, the window will prompts you that Reset password. Click the link to begin password reset with disk.
Following the password reset wizard, you can easily reset Windows 7 password with boot disk.

2. Remove Windows 7 password with password recovery software
Step 1: Download Windows 7 Password Genius from Internet.
Step 2: Install and run it on accessible computer.
Step 3: Take blank USB disk and insert it into accessible computer for password reset disk burning.
Click "Begin burning" to create a Windows 7 password reset disk. Exit USB disk from the computer when you see the message "Successfully burning".
Step 4: Plug USB reset disk into locked Windows 7 computer, set it boot from USB device.
Step 5: When Windows 7 Password Genius program runs in WinPE, choose accounts and click "Reset password" to remove these accounts password to be blank.
Reboot locked computer and it will boot from hard drive successfully, without any login password anymore.

Aug 21, 2013 | Computers & Internet

1 Answer

Compaq Presario reimage drive windows vista


Read the manual for the process to get into System Recovery or Factory Restore.

Get online and got to www.google.com In the google search box type: "ASUS Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Look for Manuals and search them for System Recovery or Factory Restore.




System Restore will allow you to select a Restore Point (date and time) to set your system back to when it was working ok. It does not delete any of your data, documents, music, pictures, videos or programs (unless the program was installed after the Restore Date you selected).

System Recovery (sometimes referred to as Factory Restore) will set your system back to when you first purchased it. It Deletes Everything. Most times the System Recovery does not work unless there is a recovery partition on your hard drive created by the manufacturer. If you are trying to recover from a set of cd's most times it does not work.

Instead of doing a System Recovery it's much easier to just Reinstall Windows. Look on your computer for the Certificate of Authentication (COA) Sticker. It will tell you what operating system is on your computer and it will give you the Product Key Code (a series of 5 letters and numbers) that you will need to activate windows. If you don't have an operating system disk, borrow one from a neighbor, friend, relative or co-worker. Just make sure it is the same as your COA Sticker's operating system or it will never activate. Also make sure you get the COA Product Key Code for the disk you borrow because sometimes the system will ask for the one that is on your system and sometimes it will ask for the one from the installation disk.

Jun 06, 2012 | HP Compaq Presario V5000Z Notebook

1 Answer

I have a sony Pcg 7x1l need to do factory restore withno disk


Read the Manual and see if they put the recovery partition on your hard drive.

Get online and got to www.google.com In the google search box type: "Sony Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Look for Manuals and search them for Recovery or Factory Restore.



You might have to do an fresh install of Windows. Look on the bottom of your laptop for the Certificate of Authentication (COA) Sticker. It will tell you what version of windows you have and it will have a key code (series of 5 letters and numbers). Borrow the same type of operating system disk from a neighbor, friend, relative or co-worker and reinstall windows. When it asks for the code to the operating system give it the one that is on your COA Sticker. Make sure the cd you borrow is exactly like your operating system otherwise when it comes time to activate windows it will not activate.



May 15, 2012 | Computers & Internet

1 Answer

HOW CAN FIX INVALID ELECTRONIC SERIAL NUMBER


In otherwords you are seeing the Activation screen?
No problem!

Primer:
When Windows is installed on a computer, is assigns hash values to certain major hardware components.

Examples such as;
1 Processor
2) Ram Memory

3) Motherboard, (To be more specific; Motherboard chipset, and BIOS program, and version)

4) Harddrive
5) Graphics chipset

Change any two of these hardware components, and Windows will 'think' it is being stolen.

(Windows: "Hey, this isn't the same computer I was put on originally!")

[Microsoft user's license states One GENUINE copy of Windows per ONE computer.

Microsoft makes one Master disk of the Operating System. From it all GENUINE copies are made, and sold ]

Primer over.

When the activation screen comes up, click on - Call Microsoft
I feel it is better to speak to a real person in case there are problems.

Before calling, have the Serial Number of the computer written down, to give to the nice representative on the phone.

This is in a white Service Tag, on the back of the computer, or up on the side of the computer tower.
S/N = Serial Number

After you click on Call Microsoft, the screen in front of you will have a series of blocks.

The top blocks (6) have number/letters in them.
The bottom (6) blocks do not.

The representative will ask you what you wish to do.

ACTIVATE

You then read off the number/letters in the first box, to the representative. Speak CLEARLY, and make sure the representative understands each letter/number.

Go to the second box. Do the same. Do this for all of the boxes.

When finished the representative will state to wait one minute.
(More like; Hold On)

The rep will come back, and state letter/numbers to you.
Put your mouse cursor in the first empty box. Left-click once.

Type the letter/numbers you are given.
Make SURE you understand the representative! IF NOT, ask the rep politely to repeat.

After you have filled the first box, the cursor will automatically jump over to the second box.
Type the letter/numbers in.

Same thing for the 3rd through 6th box.

When finished go back through all the boxes, and repeat back to the rep the letter/numbers. Make SURE they are CORRECT!

When you are finished with the last box, there is a period of silence.
You are supposed to know that you have to click on ACTIVATE, at the bottom.

Click on Activate.

That's it! Say goodbye to the nice representative. Your genuine copy of Windows is now Activated again!

{By the way. You have a new Windows Product key now.
The one in the holographic sticker on the computer is no good now }

Regards,
joecoolvette

Apr 29, 2012 | HP Computers & Internet

6 Answers

Please give authorization code for adobe premiere pro 2.0 my serial number:1132 - 1285 - 5953 - 8545 - 6450 - 4790 my activation number:2453 - 4521 - 5213 - 3431 - 7985 - 6145 - 4274 and activation...


Please give authorization code for adobe premiere pro 2.0 my serial number:1132 - 1285 - 5953 - 8545 - 6450 - 4790 my activation number:2870 - 2977 - 7615 - 7674 - 2817 - 4056 - 7675 and activation type:Normal 93: -2146869244 please give me only authorization code this version

Dec 12, 2011 | Adobe Computers & Internet

5 Answers

HOW TO ACTIVATE MY PRODUCT KEY


Hi Sumanth

Try these methods are as follows:
  • Start an Office program that has not been activated.
  • Click Activate Product on the Help menu in any Office program.
  • Run the Office Activation Wizard outside an Office program.

    To do this, click Start, point to Programs, point to Microsoft Office Tools, and then click Activate Product.

    Note This method is not available in Microsoft Office 2003 and the 2007 Microsoft Office system.
For Access 2007, for Excel 2007, for PowerPoint 2007, and for Word 2007, there are two methods to access the Office Activation Wizard. These methods are as follows:
  • Start an Office program that has not been activated.
  • Click Activate on the Resources tab. To do this, follow these steps:
    1. Click the Microsoft Office Button, and then click Program Name Options.
    2. Click the Resources tab, and then click Activate.
Thank you
gowtam1402@live.com
091-9916828137

Jan 02, 2011 | Microsoft Office Computers & Internet

2 Answers

Please help me my SN:


3. Open Keygen and Generate a Serial Number. Highlight the Serial Number and hit CONTROL + C to copy it to the clipboard. LEAVE THE KEYGEN OPEN. DO NOT CLOSE THIS KEYGEN.

4. Next, start the installation of PhotoShop CS2 V9.0

5. When PhotoShop CS2 starts installing, a window will eventually appear asking for a SERIAL NUMBER. Use the CONTROL + V key to paste the SERIAL NUMBER in the appropriate space.

6. Follow the installation wizard of PhotoShop until installation is complete.

7. After installation is complete, a window will appear to activate Photoshop. Click ACTIVATE BY TELEPHONE Button and then click ACTIVATION INFORMATION BUTTON. A new window will appear.

8. In this new window you will find an activation number. Highlight ACTIVATION NUMBER and hit CONTROL + C keys to copy to clip board.

9. Go back to KEYGEN and in the ACTIVATION NUMBER FIELD, hit CONTROL
+ V to copy activation number to KEYGEN.

10. After ACTIVATION NUMBER is copied to keygen, click GENERATE AUTHORIZATION CODE on KEYGEN.

11. MAKE Note of ACTIVATION CODE of KEYGEN. Return to Photoshop and manually type ACTIVATION CODE to PHOTOSHOP ACTIVATION WINDOW. Follow instructions after activating product.

Nov 25, 2010 | Adobe Computers & Internet

3 Answers

Need a activation key for windows vista home premium


their is no others way how get the serial key of your win vista if you don't have a original authenticate label on CPU/unit,CD manual or u lost the original key...the best way is buy a new or ask your supplier and get a original copy serial key...
good luck and best regard

May 28, 2009 | Microsoft Windows® Vista® Home Premium...

1 Answer

I can not boot window vista


Aha!
You have to activate your OS,
On your laptop you have a key for the vista, type that key in, if that dosent work you must call and activate your vista. You do that like this way:
1:) if you have a valied licens you just call that number that appears if you continue when it ask you to use the automated phone system
2:) call that number, type in those numbers you see on you laptop given to you when u get the phone number.
3:) Listen carrefull cos you going to get an actication code, and thats a lot of number, whrite them down so you dont forget them,
4:) type in those numbers you get when you be asked to do that in the activation window on your laptop
5:) continue the boot up, vista will now check to the number you typed in are valied and you will never have to to this again, if you dont format your laptop.

If you dont have a valied licens, Buy one!

Good luck to you M8!
Please take a moment and rate my help to ypu

Nic

Feb 13, 2009 | Acer Computers & Internet

2 Answers

Serial Number Issue


The only Serial that I know of that should be asked for is the Windows Product Key, This should be on a microsoft sticker on the underside of your laptop, if it is not there check your documentation as it may be there instead.

Oct 29, 2007 | Compaq Armada 1500C Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...