Question about Symphonic WV806 DVD Player/VCR
The remote control for my combo player has broken and there are not enough manual controls to operate dvd's sufficiently (only play and stop - no good for episode selection on box sets). I bought a universal remote which had the code for a Symphonic VCR player which works with the new remote and will now operate the VCR. However there was no code for the DVD part which will still will not work. Is there a code out there I can use to programme in the DVD player?
I believe if you press rec twice you can record. Thats all I have found so far
Posted on Jun 07, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY
Jul 26, 2011 | One For All URC-4021 Remote Control
Feb 12, 2011 | One For All URC-4021 Remote Control
Jun 16, 2010 | Universal Remote Control GE174Universal...
Apr 18, 2010 | Symphonic WF803 DVD Player/VCR
Oct 26, 2009 | Sylvania 6719DC 19 in. TV/VCR/DVD Combo
Oct 21, 2008 | Universal Remote Control NspireGear MP3...
Jan 27, 2008 | Symphonic WF-719 19 in. TV/VCR/DVD Combo
905 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: