Question about Toshiba MD20F51 20 in. TV/DVD Combo

1 Answer

Tv combo is 2 years old..only use in bedroom. very little use..push the button on tv or remote, the tv comes on for a second,,then goes off..if i turn on tv with remote, and keep the button held down,,the tv will stay on, but only on one channel,,if I attempt to switch channels, the tv shuts off..I have unplugged and reconnected all cable lines and electric plugs..

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

This is a very common problem in these sets. I would recommend taking it to a certified repair shop. What normally happens is that the x-ray protect transistor starts to "leak" (electricity, not fluids) and shuts the unit down. The repair is not too costly.

Posted on Jun 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not turn on?


the lightining battery is not working very well. You should exchange it, so the TV power could get to the Tv and let it Work.

Feb 28, 2008 | RCA F36685 36" TV

1 Answer

TV IS AN ORION TV/VCR COMBO. THE BEDROOM TV IS IN RUNS OFF THE LIVING ROOM RECEIVER. THE TV CHANNEL IS SUPPOSED TO BE ON 60. NO REMOTE 4 TV, TO CHANGE CHANNEL TO 60. TRYING TO PROGRAM DISH REMOTE. 1 CODE 4...


zassyway

I have provided instructions on how to program the remote to your TV. I have also provided codes for your TV brand.

Remotes: Basic (Television Only)
  1. Turn the Television On
  2. Press and Hold the TV Power button for three seconds until the LED flashes
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press OK. Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
The codes are as follow: 720, 220, 748, 721 (694 only has a 2% success rate). I hope this helps.

Ray Calo
DISH Network

Jun 18, 2010 | DISH Network IR Remote Control

1 Answer

Picture has lines and goes black after warm up


Try unplugging for 2 mins. Or press power button for 30 seconds. Your Light in the tv might be shot.... happens every 5 or so years.
GOOD LUCK
CNBY

Jun 03, 2010 | JVC RM-C18G-1H Remote Control

1 Answer

TV will not turn off with remote or manually


That means that you either need to buy a replacement remote (or use an universal remote) , or you need to replace the TV IR sensor, that is a small board located inside tv.

Dec 15, 2008 | Hitachi 46GX01B 46" Rear Projection...

1 Answer

Prima combo tv does not come on when the power button is pushed or even with the remote


check the fuse first then, resolder the power supply of your tv.

Jun 20, 2008 | Prima CV1311 TV

1 Answer

RCS 14F512T 14" TV


possibly one of the switches behind the front buttons is shorted;
could one of the front buttons be pushed in and not releasing-maybe the power button?

Apr 29, 2008 | RCA 14F512T 14" TV

1 Answer

Codes for Big Button Remote


If it's an Innovage brand Jumbo remote, try this...
There are 2 different versions of the Innovage Jumbo remote, an old and a new.
For the old version:
1. You have to have the TV or DVD turned OFF.
2. Then, you have to push CODE SEARCH button once for 3 seconds till it lights solid
3. Then press TV (or DVD) button once till it lights once and turns solid and press the ON/OFF button very slowly and repeatedly as many as 300+ times to wait for the TV (or DVD) to go on.
4. Once it goes on...STOP and IMMEDIATELY press ENTER before you pass up the code or you'll have to start over!

This is very frustrating but my advice is to take it slow and methodical. Think the tortoise and the hare...if you go too fast, you'll redo it several times because you'll keep passing it up and accidentally turn the TV on and off suddenly and miss the code.
--------------------------------------------
For the newer version:
1. Turn the TV (or DVD) ON.
2. Press CODE SEARCH once and it blinks.
3. Press TV (or DVD) once and it blinks.
4. Press ON/OFF button only ONCE.
5. Wait as it automatically searches for the code by itself. It will have a slow long blink between each code it searches.
6. Stay alert because when the TV (or DVD) goes off, you IMMEDIATELY have to push ENTER to lock in that code before it goes onto the next one. (which it will even if the TV is off)

Apr 16, 2008 | Big Button TV Universal Remote

1 Answer

DVD won't open


my open/close button doesn't work either. my model is 14PT6107S/05

Dec 11, 2007 | Philips 13MDTD20 13 in. TV/DVD Combo

Not finding what you are looking for?
Toshiba MD20F51 20 in. TV/DVD Combo Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...