Question about Craftsman Garden
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
down in the center of the clutch there is a screw that holds everything to gether.usualy it's a torx head screw.some are reverse thread so be careful.hope this helps,let me know
Posted on May 13, 2009
The needle valve is sticking open. The carb needs cleaning and diaphragm replaced. Probably best taken to a shop unless you have experience with diaphragm carburetors. Dwain
Posted on May 27, 2009
Cut the end of the line at a sharp angle. Spray WD-40 on the line and fuel tank hole. Slowly screw the line in the tank far enough so you can connect the fuel filter if you are replacing that line. If not just push the line into the tank if you have a two line system. Remember on the fuel primer, the long tip has the line going to the tank, and the short tip has the fuel line going to the carb.
Posted on Sep 05, 2009
it could still have the broken peice from the old one inside the seat.take it apart and look inside and inspect the seat where the drive cable enters.
Posted on Apr 14, 2010
Tips for a great answer:
Jan 26, 2018 | Craftsman Garden
Aug 04, 2015 | Cars & Trucks
Aug 04, 2015 | Craftsman Garden
Oct 02, 2013 | Craftsman Weed Wacker Lawn Edgers
Aug 05, 2012 | McCulloch Trimmer Plus Attachment: Add On...
Apr 13, 2010 | Craftsman 25cc Gas Line Trimmer
Jul 02, 2009 | Craftsman 25cc Gas Line Trimmer
May 13, 2009 | Craftsman Garden
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: