Question about Samsung 710V 17" LCD Monitor

1 Answer

Samsung710v i have just bought from e -bay this samsung710v we had to set it up with my crt screen to my tower then changed over to the samsung but the screen is blank,when you press the menu button it say,s test good.can you help

Posted by on

  • one day soon Mar 30, 2008

    thanks 4 the help.i have been onto samsung and they are going 2 sort it under warranty.cheers alan

  • jak12 May 06, 2008

    I have the same problem. But when I put the resolution ok to can see, after around 2weeks the message not optimimum mode appears again and I have to change my monitor and change too the resolution

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 42 Answers

It may be that the LCD monitor will not display all screen resolutions so you may need to change your resolution to match the desired resolution and refresh rate of the LCD. In your case the computer should be outputting:

1280x1024 pixels
60 Hz

You can change these settings by right clicking on the desktop and clicking properties and they're under the settings tab.

Posted on Mar 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The issue is that I had an XP machine and I bought a brand new HP deskktop Windows 7 and as soon as I turned it on I got a message on my Kogi that I should change the settings to 1280 X1024. Since I did...


To change the screen resolution, click on Start - Control Panel - Display - Settings tab and the adjust the screen resolution slider to 1280X1024 click Apply.

Feb 03, 2011 | Kogi l7eh-ta ko 17" Flat Panel LCD Monitor

1 Answer

Why my monitor screen has gone


well first check to make sure the cables are plugged in and not frayed or kinked. then check to see that the cord from your manitor to your tower (its normally blue) is screwed in because if it is not it will have a hardtime finding connectivity

Hope this helps!!

Jul 15, 2010 | Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

Screen flickering how to change flicker rate on monitor


Control Panel
Display (or Display Properties)
Settings tab
Advanced
Monitor tab
under Screen refresh rate, change to 70 hertz or higher
Apply, black screen
(Your desktop has been reconfigured. Do you want to keep these settings?) Yes
OK
OK

Jan 29, 2010 | Samsung SyncMaster 753 DFX 17" CRT Monitor

1 Answer

Sign of old age?


it is a problem with CRT screen.you can checked it from service center.

Dec 11, 2009 | Hyundai ImageQuest ImageQuest Q770 17" CRT...

1 Answer

Mx75 monitor turns off when I awaken my computer


right click on desktop select properties(screen saver ) select monitor button in that select turn monitor never.(configure carefully)

Nov 24, 2009 | HP Pavilion MX75 17" CRT Monitor

1 Answer

My screen sayin signal cable disconected


if you are using an lcd monitor, make sure you have connected the vga (screen cable) properly and tight both on the tower and your monitor. if its crt monitor then make sure the vga cable is tightly connected to the tower on the female connector

Jul 19, 2009 | Dell UltraScan P1110 21" CRT Monitor

1 Answer

I bought second hand monitor samsung syncmaster750s..when i plug it the icons become blurry and become large and i cannot set my resolution...i use the vga mode because when i start it normally..it au


Normally if you go in VGA mode the screen will be installed and when rebooting in normal mode it will set itself.
In VGA mode the resolution is 640x480 and you can't set the resolution higher, so what you are experiencing is normal.

From what you are saying it seems that the driver installed from windows is the wrong one, you can try to run windows update to see if there is a driver for it or go on samsung website.

You can get the driver from samsung here :
Samsung 750s driver

If after that it doesn't work check on the internet for compatibility issues with your graphic card, since some of the newer cards can have compatibility issues with the older CRT screens.

Jun 01, 2009 | Samsung Computer Monitors

1 Answer

Screeen went blank after changing resolution and hz appeared


refresh set to high boot safe mode change settings.
this has worked for me and XP.
Don

Jan 30, 2009 | Samsung 793S 17" CRT Monitor

1 Answer

Monitor screen went blank after changing resolution


Try unplugging the monitor and then restart, and then go back to default settings.

Jan 30, 2009 | Samsung 793S 17" CRT Monitor

Not finding what you are looking for?
Samsung 710V 17" LCD Monitor Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computer Monitors Experts

Rugeshan Lanka
Rugeshan Lanka

Level 1 Expert

15 Answers

Pieter Vleeshouwers

Level 3 Expert

1421 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Samsung Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...