Question about Nintendo Wii Console

1 Answer

Communication between board and console

Conummication is lost between board and console while exercising.
It is not low battery power.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,194 Answers

Hi,

Thanks for using Fixya.

The communication error is caused if the Wii Remote batteries are low, the remote is incorrectly synchronized within the Wii console or the distance from the sensor bar is too great.
1.Try resetting the Wii Remote, by taking out the batteries of the Wii Remote, then putting them back in (you don't need to use new batteries). Wait a few seconds before pressing any buttons to wake up the Wii Remote. If after attempting to use the Wii Remote again you are still experiencing problems, try this step again, but this time leave the batteries out for 1 minute.
2.RF interference can sometimes cause communication problems in the Wii Remote. Turn off or move away from any wireless devices, such as cordless phones, microwaves, etc.
3.Try another Wii Remote, if possible.

  • If another Wii Remote works, there is likely a problem with the original Wii Remote.
  • If another Wii Remote is not working, or if you are unable to try another Wii Remote, please take your console for repair.
Good Luck and have a nice day.

Posted on Apr 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sole f63 treadmill powers on. when I press start it resets. Any Idea?


Sounds like it is a problem with the console board. If the belt does not move and the screen just resets itself then you'll need a new console upper board.

Jul 20, 2017 | Exercise & Fitness

1 Answer

Display would not turn on. I have replaced the battery and still no display. Do I need the charging cord to get it going?


The battery charger is only used to recharge a low battery.

If the console does not light up after pedaling. connect the battery charger to the machine and then plug it into an electrical outlet.
If the console powers up, your battery is low and needs to be charged.

Leave the battery charger connected to the machine for 24 to 48 hours to charge the battery.
It is okay though to use the machine with the battery charger connected.

If that still does not work, check over all main cables for loose connections or fraying. Especially those to the battery and to the console.

Verify that the speed sensor is 2mm (about a credit cards thickeness) from the speed disc on the alternator.

Please be sure to disconnect battery cables before adjusting speed sensor or touching any other electrical components.

If anything else comes up we would be happy to assist you, contact our Tech Support Team at 888-713-2880 or visit us online at
www.sportsmith.net

Jun 20, 2015 | Stairmaster 3400CE Upright Exercise Bike

1 Answer

No display proform 280ZLX bike low volume buz low freq from speaker on cct board will probably end up flattening 4 X AA batteries


Your console is faulty. There are no parts available for the console. ....you will need to buy the whole console.

Dec 01, 2013 | Exercise & Fitness

2 Answers

Motor is not responsive and it read LOW SPEED message and time L51


Double check that all connections are secure, especially the console cable. Unplug and reconnect the console cable to verify.
Make sure the console cable is not pinched or damaged in any way.
Turn the power off, unplug the power cable and wait 60 seconds. Remove the motor cover. Wait until all red LED lights have gone off on the motor control board before proceeding. Next, verify that none of the wires connected to the lower board are loose or disconnected.

Oct 20, 2011 | RTO Sole F80 Treadmill

1 Answer

Its working sometime then blue light flash then turn off said Communications with the wii Balance Board have been interrupted.


It sounds like the batteries maybe low. To check this press the home button on the wii remote and you can check the status of the battery if you look at the controller list that comes up when you push the home button.

If this is fine try resyncing the balance board. To do this follow the guide here:

http://www.nintendo.com/consumer/systems/wii/en_na/setupBalanceBoard.jsp#Synch

If this doesn't work you'll need to call Nintendo so they can troubleshoot the board further.

Jan 03, 2010 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

"Communication with wii balance board has been interrupted" Just as I'm getting into a step aerobics rhythm the balance board blinks and shuts off its quite annoying. I called a nintendo tech and he...


communication with the wii balance board has been interrupted every time we use the board for any exercise. We have synced many times, but still is happening. Is there any other solutions of what to do besides send it back and pay $60 for a new board from nintendo?

Aug 28, 2009 | Nintendo Wii Fit for Wii

1 Answer

Balance board keeps losing communication


I can at least point you in the direction of the instruction manual:
https://www.nintendo.com/consumer/manuals/wii.jsp

Sep 05, 2017 | Nintendo Wii Console

1 Answer

The game controllers needed batteries. Once I replaced them they lost communication with the console. How do I get the communication between the console and the controllers working again?


would you happen to know what controller is the main controller? if so you should have the wii off, then take the controller and point it at the wii and press the power button in the top left corner(on remote) that should do the trick. If you do not know what one was the main one, try doing it with both.

Dec 26, 2008 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo Wii Console Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

915 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...