Question about RTO Paslode 902000 IM250 Ii Cordless 16 Gauge 3/4 2 1/2 Inch Straight Finish Nailer

1 Answer

My paslode straight brad nailer wont fire.. if you push the gas into the reciever and blow a burst into it and close the hatch it will fire.. but next shot, gas and battery fine.. no shot. fan going.. all good and clean.??HMMM...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RTO Master
  • 43,501 Answers

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



0-0-

Posted on Mar 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am using senco gas in a paslode 2nd fixing nail gun. Is the senco gas 'bad for' my gun in any way as i am having a few firing problems


You can use most gases in your gun, but paslode is the best that's why its more expensive. Try warming the gases in your pocket that sometimes helps.

Dec 17, 2014 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Finishing nailer wont fire


Make sure that you do not have a Jambed nail. Open front quick release removed damaged nail and push driver back up with small screwdriver. Make sure to check date on fuel cell befor firing. Good luck

Apr 09, 2012 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Paslode 350 nailer wont work , push to fire fan works for 2 seconds then light flashes from green to red


Hi,
Sounds like a battery contact problem or a bad battery..


Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101


Feb 17, 2011 | Dewalt D55141FNBN HeavyDuty 16Gauge Finish...

1 Answer

Paslode im250 fan running slow. light goes solid green when pushed to shoot, or pull trigger like it wants to fire. But fan runs slow and it wont fire! hot wired fan and it's fine . Changed the fan wire...


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101


Jan 03, 2011 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Paslode impulse finishing gun wont fire. battery fully charged and gas is full.


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



,.//,

Jan 01, 2011 | Omega Paslode 901000 Impulse Cordless...

1 Answer

Paslode stapler not firing with new gas & new battery


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



,..,

Dec 09, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Im 250 nailer wont fire new gas , all good battery charged cant seem to see spark what next


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



-]0]0-

Oct 21, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

My paslode f 16 nail gun wont fire nails,new gas. it actually fires but nails wo nt eject.


i found this happening to me and i oiled (light oil like 3 in 1) the driver (hammer) in the tip. that way it could retract and drive the next brad.

Jul 30, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

She wont fire, just bought from ebay


1.If fan is work check gas cell(use only paslode gas) and best before date(expired date)
2.If fan isn't working check that the battery is fully charged.
3.Make sure filter is clean and you can see through it.(no dirt or grit)
4. If after that it still isn't working you will have to take to your nearest paslode repair agent.(check on there web site for your local repairer)

good luck.!

Nov 04, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

2 Answers

IM250 Paslode straight brad nailer, fan wont shut off


My paselode was doing the same thing, and I followed all of the cleaning instructions, but the problem continued.

If it was left alone for a minute, it would fire again, so I removed the cover over the trigger assy, and checked the spark plug wire connection. The trigger came out, and during reassembly, I noticed that the electrical switch was hanging, and slowly pushing back out.

I cleaned and lightly spray/oiled the switch pin, and voila.........works like a charm.

Jul 26, 2009 | RTO PasLode 900420 Impulse Framing Nailer

Not finding what you are looking for?
RTO Paslode 902000 IM250 Ii Cordless 16 Gauge 3/4 2 1/2 Inch Straight Finish Nailer Logo

1,163 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO Tools & Hardware - Others Experts

yoopertech

Level 2 Expert

131 Answers

Are you a RTO Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...