Question about Barebone Systems

1 Answer

HP 7280 two-sided printing instructions - Barebone Systems

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just got off a live chat with a HP tech, Seems the 7280 prints double sided from a file only. It WILL NOT copy a double sided document loaded into the document feeder, or onto the scanner. Bummer. However 7280 is still a fine printer, and I have owned it since first hit the market, more than a year ago.

Posted on Nov 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I no longer have my manual, how do I change the ink cartridges for the HP Officejet 6300 all-in-one?


To replace the print cartridges
1. Make sure the HP All-in-One is on.
Caution If the HP All-in-One is off when you open the print cartridge door
to access the print cartridges, the HP All-in-One will not release the
cartridges for changing. You might damage the HP All-in-One if the print
cartridges are not docked safely on the right side when you try to remove
them.
2. Open the print cartridge door.
The print carriage moves to the far right side of the HP All-in-One.
3. Wait until the print carriage is idle and silent, and then lightly press down on a
print cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
If you are replacing the black or photo print cartridge, remove the print cartridge
from the slot on the right.
4. Pull the print cartridge toward you out of its slot.
5. If you are removing the black print cartridge in order to install the photo print
cartridge, store the black print cartridge in the print cartridge protector or an
airtight plastic container.
If you are removing the print cartridge because it is low or out of ink, recycle the
print cartridge. The HP Inkjet Supplies Recycling Program is available in many
countries/regions, and lets you recycle used print cartridges free of charge. For
more information, go to the following website:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html
6. Remove the new print cartridge from its packaging and, being careful to touch
only the black plastic, gently remove the plastic tape by using the pink pull tab.
7. Slide the new print cartridge forward into the empty slot. Then gently push on the
upper part of the print cartridge forward until it clicks into the socket.
If you are installing the tri-color print cartridge, slide it into the left slot.
If you are installing a black or photo print cartridge, slide it into the right slot.
8. Close the print cartridge door
9. If you installed a new print cartridge, the print cartridge alignment process begins.
10. Make sure you have plain paper loaded in the input tray, and then press OK.
11. The HP All-in-One aligns the print cartridges. Recycle or discard the print
cartridge alignment sheet.
12. Press OK.

Jul 17, 2011 | Barebone Systems

1 Answer

Hi I have just inserted a new HP ink cartridge 94 into my HP PSC 2350, as the ink was running low. I was printing photos, which keept printing with a red line throughout the picture. After inserting the...


Try opening the printer properties and cleaning the print heads (should probably be done each time a cartridge is changed), it uses some ink up but should clean the build up from running the previous cartridge dry and hopefully solve your printing problem.

Good luck.

Mar 29, 2008 | Barebone Systems

1 Answer

Colour prints not satisfactory


D_foofat,
This link will take you to instructions on cleaning your Cartridge Print Head: http://h10061.www1.hp.com/ccsearch/search?method=viewDocument&redirUrl=http%3A%2F%2Fh10025.www1.hp.com%2Fewfrf%2Fwc%2Fdocument%3Fdocname%3Dc00285228%26cc%3Dus%26lc%3Den%26dlc%3Den%26product%3D402150%26dlc%3Den%26lang%3Den&docId=document%28c00285228%29&uqry=&cqry=clean+printhead&ctry=us&dlc=en&lang=en&qry=clean+print+head
I hope it helps, and Good luck.

Mar 16, 2008 | Barebone Systems

1 Answer

I have a hp psc 2210 all in one printer/scanner etc. im getting ( press enter to align cartridges ) unable to correct, unit will not print.


Press and Hold the 'Setup' button while you press the 'Options' button. This will bypass the error and allow you to print.
You may want to tape a note on the printer with these instructions as this is a frequent problem on the one I have :)

Mar 13, 2008 | Barebone Systems

1 Answer

HI,got this new hp psc 1410 i have connected with my computer ,got photos ready but when i presse print it doesnt work,pls can you help.thanks


did you install the cd driver of your Hp psc 1410?
if not insert the cd driver of your HP printer, after auto play goes click install driver, just follow the instruction on screen, then finish,
remove the ink cartridge, check if ther a cover in the contact point of your cartridge, remove the seal,

Mar 12, 2008 | Barebone Systems

1 Answer

Double sided printing


There should be a setting in the 2-sided properties for binding orientation.

For a MAC, do this:

On the File menu, click Print.
Open the Two-Sided Printing panel.
Select the option to print on both sides.
Select the binding orientation by clicking the appropriate icon.
Change any other settings, and then click Print.

Feb 26, 2008 | Barebone Systems

1 Answer

HP Printer Conflict


Perform a clean and "No bloated" installation of the hardware.
Uninstall ALL the HP printer software, disconnect the PSC and reboot the computer.
When windows finish to load, connect the PSC again, the new hardware wizard will show up, follow the instructions with the HP Installation disk in the drive.
IMPORTANT: When a silver sand glass show up in the screen, CANCEL the installation of the HP software (this is by clicking "CANCEL" button or by no accepting the license terms). This will install only the PSC Drivers and nothing else.
Try printing again.

Feb 15, 2008 | Barebone Systems

1 Answer

We just attached the macbook to the hppsc 1350v all in one printer and new print cartridges. When attempting to print, message reads"color print cartridge not compatible with this printer". We know we have...


Hi,

Just to confirm pls:
1. the new print cartridges are original HP inks;
2. you have remove the bright pink tape from the ink cartridges;
3. the black is on the right side and the color is on the left side.

You can try removing both cartridges and clean the gold colored contacts where the pink tape was. Pls do the same to the mate pins in the cartridge holder in the printer.

Try again. If this does not be corrective, you may need to change inks again.

Hope this be of help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Feb 02, 2008 | Barebone Systems

1 Answer

HP Deskjet 840c - Printing Emails


I did see you reinstalled your software) but please continue
It is important that you have that icon by the clock. Power off the printer by pressing the power button on the printer.
Please un-install your printer software through Add/Remove Programs within the control panel. Please restart the Pc after un-install is complete. Create a folder on your hard drive and name it, "HP DeskJet 840C". Go to this link listed below & download the printer driver software listed. When you save to disk you can choose where you want to save. Pick the folder you created. Save inside this folder. The HP driver (Will most likely be updated software). I promise, you will have a icon down by your clock when finished.
http://h10025.www1.hp.com/ewfrf/wc/product?product=59868&lc=en&cc=us&dlc=en&submit.y=4&submit.x=7&lang=en&cc=us
Follow the instruction in your manual for setup & installation.
If you using Outlook Express & you want to print or send through your printer the page should be set as 8.5x11". Orientation should be set to Portrait, unless you set this for A4.
Lastly, please turn off your anti-virus software during install & re-install. Just in case you come back to this thread!
please vote...

Jan 30, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...