Question about GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

GE Profile gas dryer tumbles but NO HEAT, not ignitor

GE Profile gas dryer DPGT750GC1WW tumbles but NO HEAT. Replaced the ignitor but still does not heat. Any idea what else it could be?

Posted by on

  • Rick Ead
    Rick Ead May 11, 2010

    did you check the fuses relays and heater for continuity? MAKE SURE MACHINE IS UNPLUGED WHEN DOING THIS

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 43,501 Answers

Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Posted on Apr 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DPGT750Gc1ww Wont heat up Igniter lights but burner wont light


If it's an HSI (hot surface ignitor) that glows, then usually the ignition control module looks at it's current draw, to assume that it's hot enough to ignite the gas. If the current draw isn't sufficient, then it won't open the gas valve.

If you see it glow, put your volt meter on the gas valve terminals to see if it gets energized. If it doesn't energize before it locks out, then let the HSI cool down to room temp and check the resistance of it. Compare that resistance reading to a new one (one that is worn will have a higher resistance than a new one - more resistance, less current draw!).

Feb 22, 2015 | GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

My GE gas Dryer does not iginite and get hot. It turns or tumbles but does not get hot. Checked gas line everything ok with gas line. please provde step by step instraiuctions to replace the...


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101

Aug 18, 2011 | Dryers

1 Answer

Ge profile gas dryer...i am not getting heat


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101';';

;'

Jun 12, 2011 | GE Profile DPSB613G Gas Dryer

1 Answer

Dryer is tumbling but no heat!


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Oct 06, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

The dryer tumbles however there is no heat. I have checked the venting, the gas line and the internal vent...also the settings. When I remove the rear venting hose, I smell gas. Led to believe that the...


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.



if you dryer is gas check out this gas no heat tip....



If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.



check out this electric no heat tip...


heatman101

Jun 17, 2010 | GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

I need to find where the fuse is in my GE profile gas dryer DPGT750GC1WW. WE need to find this because our heat doesn't work so we need to replace the fuse


The model number you gave is for a gas dryer.
You will not find a thermal fuse in this dryer.
Your problem with no heat most likely lies in the gas valve or its subcomponents like the thermistor/flame sensor or igniter/glow coil.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Feb 17, 2010 | GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

GE Dryer DDG7580B does not heat. vents are clear, dryer tumbles, just no gas ignition. Other gas appliances working well. Help!


Replace the ceramic ignitor WE4X444. An easy fix. Nut is on the gas valve (not the line) to remove the burner assembly to replace the ignitor.

Good luck..

Jan 31, 2010 | GE Dryers

1 Answer

GE Gas Dryer (Model DQSR 483) Drum works but does not heat


There are three things besides what you aleady checked:
1. Open the small access door in front of the dryer and start the heat cycle. The ignitor must glow a bright orange so that it is hot enough to light the gas. If there is no orange glow, then the ignior needs replacement.

2. If it glows then cuts off, then glows, again and cuts off, the thermocouple sensor wire is out of position. It needs to be very, very close to the ignitor. This thermocouple sends a temperature signal when it senses that the ignitor is hot enough to ignite the gas. Unplug the dryer. Re-position the thermocouple wire mount so that the thermocouple wire is almost touching the ignitor. You may also "bend" the wire. Plug power back on and heat.

3. If it still does not heat, then the automatic gas valve that is controlled by the thermocouple sending unit is broken. The automatic gas valve cannot be safely "fixed" and must be replaced.
Hope it's just the thermocouple wire.

Oct 01, 2009 | GE DBXR463EBWW Electric Dryer

1 Answer

Ge dryer not venting


You have a bad blower motor. Best to call GE Factory Service to repair as there is probably still some kind of warranty on at least the part and it is easy for us (GE Techs) to replace but not easy if you have never replaced one. 30 minute job for me to do... GE 1-800-432-2737

Oct 24, 2008 | GE Profile Harmony DPGT750GC Gas Dryer

Not finding what you are looking for?
GE Profile Harmony DPGT750GC Gas Dryer Logo

Related Topics:

862 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Cindy Wells

Level 3 Expert

5050 Answers

yadayada
yadayada

Level 3 Expert

74894 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...