Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

2 Answers

Find serial and model number

Where do I find serial number and model number for Whirlpool Ultimate Care II Heavy Duty Super Capacity Plus washing machine?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Hello. for a top loader look here

  • Under the lid
  • On the back of the control panel
  • On the lower-front or side of the main cabinet body
  • Posted on Apr 30, 2010

    • Level 2:

      An expert who has achieved level 2 by getting 100 points

      MVP:

      An expert that got 5 achievements.

      Vice President:

      An expert whose answer got voted for 100 times.

      Sergeant:

      An expert that has over 500 points.

    • Expert
    • 166 Answers

    Normally on top load machines open the lid and look toward the back hinge area inside the lid. It is usually on the back there. It may also be posted on a white sticker on the back of the machine.

    Posted on Apr 30, 2010

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    My whirlpool ultimate Care II Heavy Duty Super Capacity Plus washer Very slightly agitates and don't spin dry


    The motor coupler may be broken. Many Whirlpool®-manufactured washers use a small, relatively inexpensive motor coupling. It's plastic and rubber and is mounted to the shaft of the motor on one side, and to the transmission on the other. Over time, the coupler wears out and fails. You may need to replace it.

    Mar 21, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...

    1 Answer

    Whirlpool Ultimate Care Heavy Duty Super Capacity Plus


    clutch could be it check if nothing is jammed between tub andbasket. if u have an oily tranny i would replace it

    Feb 12, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

    1 Answer

    Ultimate care supreme leaks underneath


    First check the hoses to the machine. If they leak the water follows the hoses and drips on floor. Also check the hose connection at the washer. They will leak inside. Next it may well be a water pump going out or the plastic hose that is under pressure when operating. The pump is in the middle of machine underneth - Sorry - Good luck

    Oct 16, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

    1 Answer

    Ultimate Care 2 Washer, Bottom half of agitator not turning


    The problem is simple and inexpensive to fix. The agitator dogs are worn and need to be replaced. The following link explains:

    http://www.fixya.com/support/r823955-replacing_agitator_dogs

    Read through the instructions and let me know if you have any questions. Use the part number provided for ordering any replacement parts. I hope this helps you.

    Jul 07, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

    1 Answer

    Old Washer won't spin or agitate


    You found a belt? Most w/p washer do not have a belt they are direct drive. take off the pump and motor to replace the motor coupling, 2 plastic pieces w/ a rubber in between

    Feb 15, 2009 | Whirlpool Washing Machines

    1 Answer

    Washer spin & gurtitate no working


    Coupling is broken that connects motor to transmission. Replace it. Please contact me if you need further help or leave feedback if appropriate as that is how I get paid. Thanks for letting me help you!

    Nov 30, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

    1 Answer

    Won't spin or agitate


    coupling.between motor and gearcase.

    Nov 11, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

    2 Answers

    Agitator


    if its a 2 piece agitator.. the gears in top of agitator is stripped out.. change gears be like new....spin top countor clockwise if it dont grap.. gears bad

    Sep 28, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

    Not finding what you are looking for?
    Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

    520 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Gerry Harvey
    Gerry Harvey

    Level 3 Expert

    1456 Answers

    Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...