Question about Canon D1250U2 Flatbed Scanner

1 Answer

When the COPY button is clicked, a small pop up indicates that " Scan Gear has stopped working ". All other buttons, Email Scan etc. do work. Can you help please. FRANK.

Posted by on

  • euroans1 Apr 30, 2010

    Many thanks.

    FRANK.


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Being that this is a scanner. Have you considered just using a work around and scanning the image and then printing it if need be? Have you tried reinstalling the software? Most likely you would end up replacing it as repair is not a economically viable option given the price of scanners.
Thank you,
Lee

Posted on Apr 30, 2010

Testimonial: "Your suggestion does work, and as i have uninstalled and reinstalled the software many times, i will stick with your solution. Thanks again, euroans1"

  • Lee A.
    Lee A. Apr 30, 2010

    You are very welcome. Please take a moment to accept/rate my solution accordingly.
    Thanks again,
    Lee


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you do a Blind Copy


If you are using Outlook, Click on New Email
In the New Email There is a To button which indicates to whom you want to send the email.
Click on the To button and at the bottom you should be able to BCC where in you send the mail as blind carbon copy.

May 26, 2014 | Computers & Internet

1 Answer

I am receiving a copy of every e-mail I send. How can I stop this from happening?


Step-By-Step, written so that even an extreme beginner can follow - sorry if it seems condescending to people who are more familiar with how this stuff usually works:

While you are signed in to your email find the icon near the upper right corner of the screen that looks like a little gear & click on it - there will be a drop-down menu that opens.

Click on 'Settings'. There will be a window that pops open .
In the left hand column of the new screen find 'Writing email' and click on it.

At the top of the screen that opens you will find text that says
'When sending messages'
Make sure that there is NOT a check mark in the box in front of where it says
'Save a copy of the message in the Sent folder' (If there is a check mark where you do not want one, click on it and it will disappear).

At the bottom left of the screen click on the SAVE button.

You should return to the screen you were on before clicking on the icon.

If this does not remedy the problem please post again.

May 13, 2014 | Yahoo Mail

1 Answer

How do I use the scanner to send a hard copy document to my computer?Please help me.


Hi, do you see the Scan button on your printer? Click on it and a window shall pop out in your computer or laptop. Then you click on the scan on your computer screen. Hope it works for you. Good luck =)

May 22, 2011 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

Canon printer MPC600F machine gives error ##335


Reset Waste Ink


1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.)
should be orange.
5. Press and hold the RESUME button again, the indicator
(L.E.D.) should be green
6. Release both buttons



Also you can try these steps if the first ones don't work for your model
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Mar 06, 2011 | Canon Office Equipment & Supplies

2 Answers

Canon mp190 error e5, with refilled cartridge will not reset, even though the error only came on after the printer had already worked with the newly refilled cartridges. Ive tried the reset/power button...


Hi. Try to reset the printer using the procedure below.

Manual Reset for Canon Pixma MPC190 Printers
  1. Enter the service mode SERVICE MODE – pressing buttons Menu, Copy, Scan, Copy, Copy
  2. Choose TEST MODE.
  3. Select 8 PRINTER TEST TEST MODE.
  4. Choose 3, EEPROM CLEAR
  5. Select 0, INK COUNT
  6. Press the Set button.
  7. Click Stop / Reset button (return to item 3), and again press the ON / OFF

Aug 21, 2010 | Computers & Internet

2 Answers

Error 5b00???


1. Unplug the printer (NO power or any connection)
2. Flip the whole thing Up side down
3. At the bottom, you can see there are screws
4. they are for the generator of the power supply
5. Take them away
6. And slowly take away the "brown" box”
7. Then you will see a power cord links with printer
8. Use a very small driver to release it with real care
9. Leave it for 30 minutes
10. Put it back together .... done

After that
Also, from other, but work....
The reset procedure (for canon MP130) is:-
Turn on the machine
(1) Press MENU
(2) Press SCAN COPY SCAN to enter service mode
(3) USE > to got to NVRAM ACCESS
(4) set ABS-M LEVEL to 0
(5) set ABS-P LEVEL to 0
(6) Press STOP to EXIT
DONE !

Aug 06, 2010 | Canon MX300 Office All-In-One Printer

1 Answer

My Lexmark P4350 printer is not scanning images to my computer?


To scan a document, please follow the steps given below:

1. Go to "Start," "All Programs," Lexmark 4300 Series, "Lexmark All-in-One Center."
To see how an image will look after it is scanned, click "Preview Now."
2. Click "Scan," "Send scanned image to."
If scanning an image, choose a graphics program such as "Lexmark Photo Editor," "MS Paint," etc.
If you wish to "Scan to OCR," choose a text program such as "MS Word," "WordPad," etc.
Once the image is scanned, the "Abbyy OCR" software will open automatically.
3. To begin the scanning process, click "Scan Now."
4. To view the additional options, click "See More Scan Settings."
To indicate what type of image is being scanned, select the "Option" next to the type of object you are scanning. Your settings will be optimized for that object type.
To indicate how the scan will be used, select the relevant option from the menu. Your resolution and other settings will be optimized based on your selection.
5. To revert back to the normal All-in-One main page, click "Hide Extra Scan Settings."
6. Under "Display Advanced Scan Settings"; you can see change settings, which will affect the outcome of your scan.

May 11, 2009 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

The buttons on the Scanner itself will no longer work.


You should be able to reconfigure the button settings by clicking on the "Settings" button in the CanoScan Toolbox application. Although the default setting is Scan, Copy and eMail, each of the buttons can be configured to do whatever operation you choose.

Oct 13, 2008 | Canon CanoScan LiDE 25 Flatbed Scanner

1 Answer

How do I get back to print mode?


All you needs to do is reset the printer by;
Power off the printer
Hold the stop/reset button then press and hold power (for 5 secs)
Hold Power and release the stop/reset button
Press the stop/reset button twice
Release power button
Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
On the 3rd press the indicator should be orange.
Press the power button to set data
The press power again to shut down
and then again the restart.
This should reset the print should work.

Dec 24, 2007 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Copy function


well you gotta provide the details in scanners configuration where you want the scanner to copy your Documents to .i.e. whether you want it to scan and store it as a image or open it with some Application or you want it to print just assign any one task with proper configuration it will definately work.
Thanks

Nov 17, 2007 | Canon CanoScan LiDE 30 Flatbed Scanner

Not finding what you are looking for?
Canon D1250U2 Flatbed Scanner Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...