Question about Kenmore HE2 Plus Front Load Washer

1 Answer

BANGS LOUDLY ON FINAL SPIN

REPLACED SHOCKS NO DIFFERENCE

Posted by on

  • rob_judynewe May 04, 2010

    checked this - could it be the spider assembly?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Pull the lower front panel off and check the filter on the pump housing. If it is restricted it may not be getting enough water out of the clothes before the spin starts. Do you have it on pedestals? Sometimes this exaggerates the vibrations due to the raised center of gravity.

Posted on Apr 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 970-C42062-00 washer drum squeaky and bangs


The bearing may be shot. A common problem with front loaders. At 10 years of age, the machine has replacement in its future.

Apr 27, 2017 | Kenmore Front Load Washer

1 Answer

Kenmore 43142 front loader bangs during spin cycle any ideas on what the problem might be?


always check the load to the drum is not to heavy on one side, this could cause it to bang.

Aug 25, 2012 | Kenmore Washing Machines

1 Answer

Sounds like the drum is loose . It bangs like crazy in the spin cycle.And i mean realy bangs


check the shocks but most likely you have a bad spider gear and it would be cheaper to replace the washer.http://www.youtube.com/watch?v=MTKuOqWDhkI...copy and paste

Jun 07, 2011 | Frigidaire Washing Machines

1 Answer

Whirlpool WFS1276AW bangs loudly when rinsing and spinning


Hi,

When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front load washers can make..

Washer Problems Washer noise when spinning


heatman101

Sep 06, 2010 | Whirlpool LHW0050PQ Front Load Washer

1 Answer

Wachine machine bangs when on spin cycle.


Unless your top loader is set firmly on concrete and leveled to perfection, the force of a heavy wash load spinning in excess of 1000rpm will create a bit of vibration and noise.A firm footing is your best defense against to much movement.
Also due to the earlier movements during the spin cycle, the shocks that are used to dampen the spin cycle might have been broken or damaged.
If the problem persists inspite of proper levelling, please do check for the shocks or might have them replaced them for good.

Dec 15, 2008 | Washing Machines

1 Answer

Banging during high speed spin cycle


Laco, drop the bottom front panel and see if all of the shocks are in tact on the tub assy. They just insert and lock by turning. If these are ok, check the back belt pulley. Sometimes one of the tines will split or crack and you will get this symptom. Catriver..post back.

Mar 04, 2007 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2290 Answers

fordexpert

Level 3 Expert

5537 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...