Question about Vizio P50HDTV10A 50 in. Plasma HDTV

2 Answers

SET "PUFFS OUT" AFTER 2 HOURS..CAN NOT BE TURNED BACK ON . HAS TO

HEY, i DON'T WANT TO PAY FOR THIS..iM A TECH BUT I DON'T HAVE A SCHEMO...JUST TELL ME WHICH MODULE IS THE PSU. I HAVE TAKEN THE REAR PANEL OFF. THE UNIT IS VERY MODULAR. WHICH OMNE IS IT?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

This is the power board:


sET

Posted on Apr 30, 2010

  • ABRsvcs Apr 30, 2010

    Didn't take the picture so go to the link below. Click the guest tab, then click on the US Dollars tab. This will get you to the point of entering a model number or part number. Enter the part number as follows: 6871QIH001A



    That will get you to the part page. Click on the "larger image" and you will see the power supply module.



    Dan





    Link: http://www.encompassparts.com/

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Vizio Master
  • 3,866 Answers

Follow you AC line in you will find the psu!!

Posted on Apr 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hey Im the one that was asking about featherlite weedeater starting problem and you suggested a carb kit. How easy is that to put together? Im a novice woman do you think I could do it?


Hi,

Welcome to fixya!

I'm a woman too and I learned by trying. Don't let anyone tell you you can't do something. Borrow some tools if you don't have any and go for it.
Carbs come with instructions on how to put them together.
If you have trouble, come back here and someone will help you out.

Go for it!

Handie Andie

Jul 16, 2011 | Garden

2 Answers

PS3 turns but DON'T SHOW UP ON A TV. Hey there. 1-2 weeks ago i was to my friend with my ps3 and there we turn the console on with an HDMI cable. it worked well. Then i came home and when i turn my ps3...


ok with the power button turned off press and hold the power button you will here one beep and then two beeps and then release and look at your tv and there you go.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

May 30, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Battery charge immediatly and discharge immediatly


hey dude.. i am facing ur problem 2 well i solve it by luck first step u should turn it off and get out the battery after couple of hours return the battery back and charge it again dont charge the phone more than 2 hours and use it normally DONT MAKE PHONE CALLS AFTER CHARGING IMMEDIATLEY w8 for 1 day and then it wil be fixed ;) if this dont work go to the store and buy a new ****ing battery ;) this phone have money problems ;(

Feb 20, 2011 | LG KF510 silver on Orange Pay As You Go...

1 Answer

GE range clicking


Amanda,

We just let it dry out for 48 hours and then plugged it back in, it works fine now and we haven't had any problems with it since then (about a month ago). Hope this solves your problem too, it's a bummer to have to pay someone when you can just fix it yourself!

good luck, Tish

Nov 28, 2008 | Kitchen Ranges

1 Answer

Picture tube


It has a bad solder joint. TV's use cheap, one sided circuit boards which don't solder as well and with all the hot and sometimes heavy parts on the board, it is common to have bad solder joints. Especially on the newer ones have have switched to the mandated lead-free type solders. A tech needs to resolder the circuit board using an eagle eye to spy out the bad joint.
Hope Ya Fix it!

Jan 07, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Sony FD Trinitron WEGA KV-34HS420 34" TV Problem:


HEY MASH-1ST ANY MAGNETS/SPEAKES OR MOTORS NEAR SET CAN CAUSE A CHANGE IN THE PIX TUBES PURITY FIELD WHICH IS WHAT YOU SAW. MAKE SURE ANYTHING LIKE THAT IS NOT PRESENT, THEN IF SET KEEPS ACTING UP YOU'LL NEED A DEGAUSSING CIRCUIT REPAIR, BEST DONE BY A QUALIFIED TV TECH.JOE TV

Oct 31, 2007 | Sony FD Trinitron WEGA KV-34HS420 34" TV

7 Answers

Blue spot


You have a defective light engine and you DO NOT have to be under warranty to have it replaced. Here's what you need to do...we just went through this. You need to call Hitachi's Customer Relations Department (not regular customer service). The customer relations # for Hitachi is 800-654-7013. Tell them what's happening with your set and that you think it's a bad light engine. When you call them, they will initially act like they have not heard of this problem but will give you some names of some certified Hitachi dealers in your area.

Call one of the dealers and they will send a tech out to diagnois the problem. Once the tech tells you that you have a defective light engine (all they have to do is look at the set when you have it turned on) call Hitachi customer relations back and tell them you had a tech out to confirm the problem. They will then act like they know exactly what you're talking about...imagine that! They will call the dealer that came out and once they confirm this with them, they will send a new light engine to the dealer. The dealer will then call you and arrange a time to come out and install it.

This part is paid for by Hitachi, regardless if you're under warranty or not. If your under warranty, the service should be covered if not, the part will be covered by Hitachi and all you pay is for the install. Our install was $400. DO NOT let any dealer get the part and tell you that you have to pay the $1500 for it. Hitachi knows about this problem and they are paying for the part. All you pay is for the install. Again, deal only with customer relations at the number listed above and only deal with a dealer Hitachi refers you to. Good Luck!

Oct 21, 2006 | Hitachi 50V500 50 in. HD-Ready LCD...

3 Answers

Power but no picture or sound


Is hard to tell if the set is going to need parts or not,maybe not,since you protected the set from dust is not likely the cause of the problem,after a while the units develop loose conections because of the heat dissipation some components have and the solder conections become loose.Be safe and seek assistance if you are not too familiar with tv service.

Sep 27, 2006 | Mitsubishi WS-55857 55" Rear Projection...

1 Answer

No picture


Something in the power supply sounds like it popped. Like a capacitor? These sets the whole board is made to replace. But theres alot of techs who fix these boards and charge alot of money, but in the long run unless its a common problem it dosent pay for the board to be fixed. An example is a tech will charge 65 an hour for labor. It take almost two hours to fix board and 2 weeks to get parts. Pickup and delivery is 75 bucks. service call is 50 bucks. The whole rebuilt board is 140 bucks. + inhome labor at 50 bucks and no long wait to get set back. And the entire board has a 90 day warrantte not just what the tech fixed. Good Luck

Jul 02, 2006 | Zenith H25F36DT 25" TV

1 Answer

JVC AV-27820 27" TV


Im sorry your having this trouble But I cant tell you whats wrong as I havent looked at the set. The problem could be a simple power supply problem or a cold solder connections in the horizontal sweep circuit. If your not a tech this is not a job for an experimenter or tinker . There is hi voltage in these sets even when they are unplugged so you are gonna need to call a pro in to assit you in this repair or geta new one > good Luck

Jun 11, 2006 | JVC AV-27820 27" TV

Not finding what you are looking for?
Vizio P50HDTV10A 50 in. Plasma HDTV Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...