Question about Canon PIXMA iP1800 InkJet Photo Printer

3 Answers

Printer error Printer does not print and it has an error 6000 code

Posted by on

  • 2 more comments 
  • Nuxieus Apr 20, 2008

    I got Service Error 6000 message. The orange and green lamp flashes repeatedly. How to fix this..?

  • pdjohnson Jun 18, 2008

    I have a canon pixma mp600r multifunctional printer and while printing the paper jammed and error 6000 came up. After clearing the jam I cant get rid of the error and cant print anything

  • aancdunn Jul 13, 2008

    all i did is hit print and error 6000 came up please cancel print turn off and restart printer if this does not fix the problen chech your user guide. I DID THERE IS NOTHING THERE TO HELP.

  • Anonymous Jan 05, 2009

    how get solution for this problem

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to repair canon 1880, if the comand is "the ink absorber is full" anybody please tell me about solution.

Posted on Oct 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to microsoft word and under tools go to letters and mailings under the options button you will find business cards the business cards that you bought has a code in the right hand corner go down until you see your code and click on it and hit new document and it should format for you

Posted on Apr 18, 2008

You're kidding

Posted on Apr 25, 2008

6 Suggested Answers

  • 1 Answer

SOURCE: Canon MP830 Service Error 6000

I have same problem affter update internet explorer version 7 from 5.6 message in screen error servive 6000

Posted on Apr 17, 2008

SOURCE: Error code 6000

I had same trouble with pixma MP110. Did everything but no luck. Noticed the paper feed tray was off centre...turned it all upside down and a drawing pin fell out. it was jammed behind thepaper feed and unit itself. All works well now. So, check something has not dropped into the paper area!!!

Posted on May 16, 2008

  • 32 Answers

SOURCE: canon mx310 error code 6000

Error 6000 is a service call error, meaning that the printer needs to be taken into a canon authorized service facility for repair.

This is a line feed error, with the problem originating from the timing **** disk film or the printer's logic board.

Posted on May 28, 2009

pineworks
  • 4041 Answers

SOURCE: printer error code 6000

Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


  1. Start with printer off
  2. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
  3. While holding the Power button, release the Resume Button.
  4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
  5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
  6. Turn off the printer and turn on again
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Apr 26, 2010

  • 284 Answers

SOURCE: My Canon MP980 is showing Printer Error code 6000....

error [6000] or light blinking 3 times is mean there is an error occurred in the LF encoder signal.

Posted on May 27, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 6000


Go To Below official Canon Printer Page For Your problem http://forums.usa.canon.com/t5/errors/FilterErrorHandlerPage Hope It's resolve all Your Printer Problem,
Or

Still having Problem Then follow Us ForCanon Printer Support

Mar 12, 2014 | Canon Pixma MX360 Printer

1 Answer

Printer error has occurred 6000


Error 6000 gets displayed when there is a paper jam or other general malfunction. When the message "6000 Printer error has occurred. Turn off the printer then back on again. If the problem persists, see the manual." Is displayed, something may block the paper feed tray from opening.
If the printer is surrounded with documents or when you copy large documents such as books, make sure that you secure the clear space in front of the tray before printing / copying. When the error message above is displayed and if you find something is in front of the tray, remove it. Then, turn OFF the printer and back ON again and the printer will be ready for printing.
If you still have the trouble, contact the repair service.

Check the printer for any paper jam or try to reset the printer to release memory code errors.

1. Press and hold the Resume button for 1 - 2 minutes.
2. Open the cover.
3. Remove the cartridge and then reinstall it.
4. Close the cover.
5. Turn Off the printer.
6. Turn On the printer.

Feb 14, 2011 | Computers & Internet

1 Answer

Printer Error message : Printer Error has occurred. 6000


Error 6000 gets displayed when there is a paper jam or other general malfunction. When the message "6000 Printer error has occurred. Turn off the printer then back on again. If the problem persists, see the manual." Is displayed, something may block the paper feed tray from opening.
If the printer is surrounded with documents or when you copy large documents such as books, make sure that you secure the clear space in front of the tray before printing / copying. When the error message above is displayed and if you find something is in front of the tray, remove it. Then, turn OFF the printer and back ON again and the printer will be ready for printing.
If you still have the trouble, contact the repair service.

Check the printer for any paper jam or try to reset the printer to release memory code errors.

1. Press and hold the Resume button for 1 - 2 minutes.
2. Open the cover.
3. Remove the cartridge and then reinstall it.
4. Close the cover.
5. Turn Off the printer.
6. Turn On the printer.

Dec 21, 2010 | Canon Office Equipment & Supplies

1 Answer

Getting code 6000


Error code [6000] or light blinking 3 times.
1. Smearing or scratches on the LF encoder. Please clean the LF encoder.
2. Foreign material or paper debris in the LF drive. Please remove any foreign materials if encounter.
3. Check cable connection.
4. Replace LF encoder or Logic Board or Paper Feed Motor or Paper Feed Roller Unit

May 27, 2010 | Canon PIXMA MP620 All-In-One InkJet...

1 Answer

My Canon MP980 is showing Printer Error code 6000. Have turn off machine and turned on again - no change - still showing.


error [6000] or light blinking 3 times is mean there is an error occurred in the LF encoder signal.

May 20, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Error code 6000


Hi there,
  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the website
  • after installing drivers and software it will ask you to connect the printer.
  • then you can connect the printer and and try to Print the test page.

Apr 27, 2009 | Office Equipment & Supplies

2 Answers

Error code 6000 on canon pixma mp210 stops me from printing


Hi,
Error 6000 means - The specified file could not be encrypted.
Solution: reinstall the printer driver.... it's better to install a upgraded version of driver...
Good Luck!!!

Mar 19, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Error 6000 is shown!!!!!!!


whenever it try to copy scan or print by canon pixmamp150 printer it shows error 5?please give me a solution to solve this problem.pleeeeeeeeeez
ayman refaie
ayman_refaie@yahoo.com

Feb 19, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Printer error


Hello,
For fixing your problem do the following:
1. un-install the printer drivers
2. restart the system
3. Remove the connections of the printer from the cpu
4. Install the drivers for the all in one printer
5. Restart the system
6. Connect the cables and Power on the Printer

Let me know if your problem is solved and rate me as FIXYA!

May 16, 2008 | Canon PIXMA MP460 All-In-One InkJet...

2 Answers

Canon MP830 Service Error 6000


Canon PIXMA MP830 all-in-one Inkjet Printer
Error code 5C10 on computor screen and on the printer it says 6A00

Jan 18, 2008 | Canon PIXMA MP830 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  iP1800 InkJet Photo Printer Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1814 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...