Washing Machines Logo

Related Topics:

Posted on Mar 25, 2008

Washing machine will not drain.

I have a whirlpool LSR8233JQ0 washing machine. The tub fills up, and agitates, but will not empty or spin. The machine makes a ticking sound when I turn the knob to spin cycle. Replace lid switch without success.

  • jxjxjx Jun 05, 2008

    i had the same problem, so i repalced the timer, but ti still does not wrrk. The wires leaving the timer get real warm, but nothing below is working, just drawing current.

    help, I'm about to toss this 8 year old washer, but I'd rather fix it.



×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Dec 11, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Dec 12, 2008
Answers
1
Questions
1
Helped
361
Points
3

I have the same problem. If I press on the lid by the switch it starts up and finishes the load. Hope this works for you!

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 14 Answers
  • Posted on Mar 25, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Dec 10, 2007
Answers
14
Questions
0
Helped
8578
Points
26
Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Washing machine fills with water ok but won't agitate completely, will empty the water but will not spin.

Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

0helpful
3answers

I have a whirlpool washer model lsr8233jq0. It was working fine until I moved. I think my "movers" might have damaged it. The tub will fill with water and it will spin but the tub won't drain. I don't...

Tilt it on it's side (once you drain it, using a shop vac). Locate the drain hose, it's connected to the pump. Remove hose, See if anything is blocking the exit.

While it's on its side, check and see if your "movers" (Which probably means means uncle bob and his beer buddy roy) might have disconnected and wires leadign the the pump... 99.999% of connectors are simple push on type.

Here is a link for parts:

http://www.appliancepartspros.com/parts-for-whirlpool-lsr8233jq0.html?gclid=CjwKCAjwmqHPBRBQEiwAOvbR87jpY9zkWYNi9TeAAvBLZ3vrwKdaPrpRMBZ48F9klx7loD1Kqa_8HBoCGPoQAvD_BwE
0helpful
1answer

Washing machine filled but wont agitate after the fill,it humms

Maybe the agitator isnt agitated enough.....yell at it for a bit...see what happens....if it that dont make it spin poor a lil rum in the tub....
0helpful
1answer

Washing machine won't drain but it will spin.

sounds like a motor problem, the motor turns 1 way to agitate and the other way to drain and spin
3helpful
1answer
0helpful
1answer

Washer stopped after wash. Would not drain or spin. Will fill.

Hi, can I get a Model# and make so I can try and assist you?

Vic
0helpful
1answer

Washer stops after the tub fills, agitator and tub do not spin

Your lid switch is bad. If you give model number I can give you the part number you need.
0helpful
1answer

Agitator won't turn and tub won't spin

The motor coupling is broken, the part located between the motor and the transmission.
0helpful
1answer

Frigidaire stackable will not stop filling with water or agitate.

yes unless pressure switch(water level switch)detects proper fill level wash will never start agitating some washer will not spin if switch does not detect empty tub
0helpful
1answer

I have a whirlpool model LSR 8233JQ0 washing machine. The tub will fill and agitate but will not empty out or spin. I replace the lid switch without success. The machine makes a sort of ticking sound...

you say it wont drain the water??? if it fills, agitates , and doesnt advance past the first rinse cycle, it does sound like a lid switch issue, can you hear the switch "clicking" when the door is just about closed??? if not then its not recognizing the door and wont advance for safety reasons.and when you replaced the switch were you sure to remember ot replug the harness before reassmbleing the unit
Not finding what you are looking for?

371 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...