Question about One For All URC-3021 Remote Control

1 Answer

One For All TV Changer...Set Up ????

To set up one for all remote to magnavox tv instuction and code #'s?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 52 Answers

Hi there,

there a few codes listed as operating a Magnavox tv any one of these should work using an all for one urc3021 remote control, they are listed in the user manual as: 0054, 0706, 0030, 1454, 1254. A manual is available to view or download from the all for one manual support website, if you use the link below it will take you to the site and if you click on the word 'click here' highlighted in blue it will then take you to the next page, there if you click on 'catagory' it will bring up a list. Looking down this list your remote control will be listed, if you click on URC 3021 ENG it will bring up either a PDF file for your manual or the user manual will automatically open at this point you can simply view it or save it to your computer.

Hope this helped,

James

http://www.oneforall.com/us_US/support

Posted on May 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I program it to a Magnavox tv flatscreen


Programming an RCA Universal Remote - YouTube

? 2:46
https://www.youtube.com/watch?v=MZd4yBivcZ4
Nov 10, 2008 - Uploaded by alpharedecho
... how to program an RCA Universal remote for operation with your TV. ... Still in able to work or my rca flat screen and my zenith. .. ive .... I'd do it over and over and the power button on the remote just turns off in the end?.

Magnavox TV codes - Magnavox TV set. Buy, reviews ...

magnavoxtv.org/magnavox-tv-manual/magnavox-tv-codes/
Helpful Resources for Magnavox TV codes. Press and hold ... Note: If some buttonsdo not operate your equipment, try one of the other codes for your brand. TV.

RCA Universal Remote Control- Target Programming ...



Dec 25, 2015 | RCA CRK76TE1 UNIVERSAL REMOTE - With...

2 Answers

Can I program my new Emerson TV remote with the Magnavox TV if the model # match?


If it has set-up code to your magnavox device, you can. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Oct 29, 2014 | Magnavox Televison & Video

2 Answers

Need tv code numbers for gemini universal tv remote so i canprogram to my magnavox tv set


Hi,
Code for your Gemini universal remoet to progrmme your magnavox TV are

080,120,130,190,270,300,0054, 0706, 0030, 1454, 1254
Thanx

Aug 05, 2010 | Gemini 1 Device Universal Television...

1 Answer

I lost the booklet with all the codes for my remote and i need the code to work my tv my tv is a symphonic


I suggest you try these steps..

1.Turn the television set on by pressing the "Power" button on the set.

2. Find the "Code Search" button on the Philips Magnavox remote. This button will be labeled or will be a different color than the other buttons on the remote (depending on which Philips Magnavox remote you own)

3. Hold the "Code Search" button down for about ten straight seconds. The light on the Philips Magnavox remote should then stay on.

4. Starting pressing either the "Up" or "Down" channel button on the Philips Magnavox remote. Continue pressing the same button until the television responds to the remote. It could take a few minutes for the channel to change so you'll need to have patience when searching for the remote code in this manner.

5. Press the power button on the Philips Magnavox remote once the channel has changes. If the device shuts off, press the power button again to turn the TV back on. If the TV turns on, the remote has been programmed correctly. Repeat the entire process if your remote is not programmed.

I hope this helps...

Jun 10, 2010 | Philips Magnavox Learning Universal Remote

2 Answers

SDTV REMOTE CODES FOR MAGNAVOX


Hi

On the URC 4330 model the Magnavox brand is not listed in the code index.

Therefore, you should be aware that this remote may not have code stored in its pre-programmed library to allow it to operate Magnavox.

There is a code search function with this remote and this is your only other option in a situation such as this.

TO SEARCH FOR YOUR CODE FOR YOUR TV

1. On the remote control, press TV once.

2. Press and hold SET until the LED blinks twice, then release SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.

NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first so this may take some time to complete.

5.Once you find the point at which the remote operates the TV press and hold SET until the LED blinks twice, then release SET. This locks in the code.

As I say - the remote may or may not compatible with Magnavox. However this search function is there to use in situations such as this.

Hope this helps. Thanks for using FixYa.

Jan 09, 2010 | One For All URC-4330 Remote Control

1 Answer

Oneforall urc 6012 codes for magnavox tv/vcr/dvd combo


set up codes for TV/VCR Combo :
MAGNAVOX 0000 or 0081 (for TV use 0054)
set up code for DVD :
MAGNAVOX 0503 or 0675
hope this helps , please rate , AJ

Nov 04, 2009 | Televison & Video

1 Answer

Child lock will not allow my tv to turn on


i was programming my television by hand because i do not have a remote to my television and i accidentally set the child lock and now my tv will not turn on what can i do to fix my tvtv is on standby, standby light is on. can turn tv on with programable remote after pressing on button several times to set code on remote. press any function button and screen says child lock is on. can't get anywhere pressing any buttons, turn tv off with on/off button and tv goes back to stand by. don't have magnavox remote any ideas?

Jul 19, 2008 | Philips Magnavox 20MS3442 20" TV

2 Answers

Magnavox universal remote for sanyo tv


ok...got this nice sanyo ds19310 from brother without remote..have a magnavox universal remote but don't have code for tv or if i can use magnavox codes or can i set remote to it another way...thanks for any help i can get! megnavox tv code is Press following key combination 0>6>2>5>9>6>MENU to select item press cursor(up)and (down) to change item value press cursor(right)and (left) cancellation of service mode press POWER button on the set regards thanks

Sep 10, 2007 | Sanyo DS19310 19" TV

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Cindy Wells

Level 3 Expert

5124 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...