Question about D-Link AirPlus DI-524 Wireless Router

1 Answer

The sttus button is binking

It wont quit blinking and it is the only thing that is blinking

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 172 Answers

Hi, it could be something wrong with the hardware. You may do a HARD RESET and see but I doubt it. Unplug your router (the power cable). Then you have find the reset button (a very tiny one behind the router) and once you find it, keep it pressed and while pressed you have to reconnect the power cable and wait for 10 seconds... then release the reset button and you will reset the router to factory default, so you will have probably to go to (default ip) and type admin (as the user) and "blank" password (no password) and then you reconfigure your settings. I hope this helps. Don't forget to rate and provide positive feedback for our fast-free response today. Thank you :D

Posted on Apr 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Good Morning Sir canon pixma ip 1880 red light is bink & don't stop how to solve this problem

Blinking 5 times: black cartrifge error (not recognized), blinking 7 times : colour cartridge error. See status monitor for detail. if ink running out message appear, just press ink button 30 second for releasing ink counter.

Dec 05, 2010 | Canon Office Equipment & Supplies

1 Answer

It wont connect logitech playstation it will just bink a thin go off

There's a button on the usb that you need to press while pressing the ps3 button on the controller.

Jul 25, 2010 | Logitech Cordless Precision Controller for...

1 Answer

My oil light on my dash starts blinking after going about 5 miles

-check the Oil pressure switch see it loose or not connected. maybe bad oil pressure switch -chech the engine oil see if it's need more oil. - the last thing i would think is the oil pump. all these things can cause the oil light binks or ON.

Apr 17, 2010 | 1993 Honda Accord

2 Answers

The standby light just blinks when i try to turn it on and it wont turn on

Count the number of blinks of the standby light. It will bink a count, pause and do it again (Common counts are 2 -9) Give this count to a Sony service center and they can help you know what the issue is. (Probably the lamp)

Apr 17, 2010 | Sony KP-51WS520 51" Rear Projection...

1 Answer

Binks bbr converting from pressure to siphon

Worked in paint repair shop for 18+ years. Every time we had that issue it was the wrong air cap. The particular model we always had trouble with was a Devilbiss JGA going from a pressurized system to a 1 quart cup. But the Devilbiss and Binks are quite similar.
The air cap from the pressurized system would actually cause a reverse pressure in the cup.
Both air caps were for this gun. Also the Devilbiss
rep said they should be interchangeable.
They weren't. Try a different air cap.
I'm kind of curious so please let me know if this works for your Binks.
Good luck!

Jul 31, 2009 | Binks MACH 1 HVLP Pressure Feed Spray...

1 Answer

Wont start power supply binks

What do u mean u unplug the motherboard...?

May 27, 2009 | HP Compaq Presario SR1230NX (PJ518AA) PC...

1 Answer


press and hold the menu and device/input buttons both in together for 5 seconds then the led will blink a number of blinks pause then blink another number of blinks then repeat that process. Let me know thw binks you get for the two digit blink error code.

Feb 02, 2009 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

All 4 lights on my haier dishwasher Model CG206B blink and beep.

I had the same thing the drain hose was plugged.To reset You have to tilt the washer back 45 degrees.Mine is now running hope this helps.JIM

Jan 04, 2009 | Haier ESD200 Built-in Dishwasher

3 Answers

It wont turn on and there is a red flashing light

first check your batteries ,whether they are charged or not?and also try the hard reset method ,that is,remove the batteries and keep it removed for half an hour and then insert the battery and try again,it will help you

Aug 04, 2008 | Cameras

2 Answers

Airnet router

power failure had to change internet password with verizon have to rest my airnet router awro14g/a

May 13, 2008 | Airnet Wireless Broadband Router 108Mbps...

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides