Treadclimber tc3000 treads/STEPS WILL NOT GO UP & DOWN EVEN

https://www.bowflex.com/video/treadclimber-belt-lubrication.html

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/

Bowflex Treadclimber Shuts down - Questions - Fixya

www.fixya.com > Forum > Treadmills > Bowflex > Bowflex Treadclimber

Bowflex Treadclimber, shuts down related issues. ... After a few times of shutting down due to the heat. Ad ... It shuts down about 60 seconds after it starts.

Customer Reviews: Bowflex TC3000 Treadclimber

www.amazon.com/Bowflex...Treadclimber/.../B000B...

Amazon.com, Inc.The second time I used it I slowed down the speed and worked on getting the ... After researching the TreadClimber for over a year (the cost was a big factor .... We were never able to make the treadles go up and down more that a few inches. ..... a great workout However it continually shut offs while working out and Bowflex ...

Comments for Bowflex TreadClimber Problems

www.treadmilltalk.com/bowflex-treadclimber-user-comments-comments....

Oct 30, 2013 - NOTE: My comment about Bowflex Treadclimbers is also one I left in another area. ... seems like no one sprung the extra few bucks to pay for someone to put the ... In my case , after the initial startup, the machine stops EVERY time at ...nearly spine snapping shutdown at exactly 32 minutes after starting. 5.

[PDF]Bowflex® TreadClimber® 1000, 3000 & 5000 - Nautilus

download.dfxi.com/.../SM/Bowflex/BFX_TC135_SM_RevA_web.pdf

https://www.bowflex.com/video/treadclimber-cylinder-adjustment.html

Try this...

Use grease

I just got a BowFlex TreadClimber TC3000. I have been using it for about 1 week and I noticed black dust coming out of the back. It was near the treadles. I called BowFlex and they said that this is normal during the first few weeks of use. This is the coating coming off of the treads. They said I could vaccum it up. They also mentioned that they only time to really worry is if there is white dust. That is the actual treads wearing off. Hope that helps!

I didn't use mine for several years then just started again. It stopped after 15 minutes so I read the manual and used a silcone lubricant on/under the treads as recommended. That definitely helped and it was working again quite well for about a week or two. Now I get the error 5 again. Wondering if I needed to add MORE lubricant the first time so I am going to do it again tonight. Maybe it is the roller pully that needs the lubricant. Who knows. I just want it to work!! I am determined. :)
-becky

You will need to make contact with bowflex if you broke the item. You may be able to glue back the item as well. The front lid come off, sometime you have to tilt the machine with another person. This will allow you to get to the under side.

I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511

make sure speed sensor isnt to far away from left wheel or did not get unplugged from circut board