No,not true, You Can fit new bruhes, try appliances 4 spares, they supply them. you need to remove old brushes, from holder, by straightening the retaining tab,then cut off old brush wire braid, close to the retaining plate, and solder new in place.No,not true, You Can fit new bruhes, try appliances 4 spares, they supply them. you need to remove old brushes, from holder, by straightening the retaining tab,then cut off old brush wire braid, close to the retaining plate, and solder new in place.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here a few repair tips to make fixing vacuum easier. Your Dyson brush-roll is connected to the motor by two different sized geared belts. Over time, the belt's gears wear down and stretch out losing the grooves and tension that turn the roller. Another reason why your brush is not spinning could be there is debris stuck on the roller and/or bearings. You can either use a can of compressed air to remove the debris or simply remove it with your hand.
You can purchase direct your replacement Dyson Parts from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10
I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.
Although it's an online guide, and is designed to be navigated quickly and easily via your web browser, the pages could also be printed out if you wanted a hard copy.
I hope this helps, but if you'd like any further information or advice, please give our freephone UK Helpline a call on 0800 298 0298.
If your DC04 has a brush control on the cleaner head, you'll need to set this to 'On' for carpets, and 'Off' for hard floors. You can find out how to do this on our Support site:
If your machine does not include the brush control, it will only be suitable for vacuuming carpeted surfaces and we'd advise against using it on hard floors in upright mode. However, you can use the hose and wand to vacuum hard floors and we have several suitable hard floor tools available which may help.
I hope this helps - if you'd like further advice you can reach our freephone Helpline on 0800 298 0298. Just to let you know, our Helpline is available from 7am-10pm, 7 days a week. Best wishes, JackDyson Online Customer Supporthttp://www.dyson.co.uk
I'm sorry to hear you're having difficulties with your DC04 Absolute. If the brushbar won't turn, I'd encourage you to give us a call so we can run through some troubleshooting over the phone with you, and provide further assistance. You can call us free on 0800 298 0298 - our Helpline is available from 7am until 10pm, 7 days a week.
Sorry to hear you're having difficulties with your DC04. You might find it helpful to run through this step-by-step troubleshooting guide to make sure the soleplate is correctly fitted, and that there are no blockages in the cleaner:
If you've tried this and are still concerned, it's probably best if you get in touch with us directly. One of our experts will be happy to run through some troubleshooting over the phone with you, and recommend the best course of action. You can call us free on 08002980298 - our Helpline is open from 7am until 10pm, 7 days a week.
The brush will not rotate when the machine is upright. The brush only rotates when it is reclined; in use.
On the side of the housing where you place your foot to recline it is a round knob. Turn it one click clockwise if you can; to the "auto" position.
If the brush doesn't turn then when the machine is reclined, it needs attention to the belt and/or clutch mechanism.
Dyson DC04 Absolute Part diagram will bring up the link for exploded voews. I still need more detail on how to find out where a steel pin approximately 2m/m dia. and approx. 75 m/m long goes. It "fell out" of the Dyson when I disassembled it. Your turn!
No,not true, You Can fit new bruhes, try appliances 4 spares, they supply them. you need to remove old brushes, from holder, by straightening the retaining tab,then cut off old brush wire braid, close to the retaining plate, and solder new in place.
×