Question about Cameras

1 Answer

Put philips laptopcam spc610nc on pc everything seems ok but camera dont come on it is in task bar with red cross on it

Posted by on

  • Anonymous Apr 24, 2008

    same problem, but no red cross on icon in taskbar, click "launch" and nothing happens. Went to Phillips page, got the Vista driver, but it will not instal. Camera works fine on my other XP laptop...just not on either Vista Premium or Vista Ultimate laptops. Vista driver will not install a critical DLL, thus is useless. Steve M, Dover, NH

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have attempted install my SPC610nc numerous times and yet can't get it to function. I have uninstalled it and reinstalled it three times but I am unable to access it or get it to work. It appears in my Programs section but the only sub-topic is "uninstall". I can't get it to open. There is no other presentation anywhere on my computer that might allow me to activate it, access it, or use it at all.

Posted on Nov 16, 2008

  • basil_usn Nov 16, 2008

    I am using this SPC 610NC with a HP Pavilion Phoenix SE a6655f PC desk top computer that was purchased yesterday and am attempting to load and use the cam. I am getting no indication that it is functioning nor can I access this program other than to uninstall it.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

D60 error press shutter release button


Here's what I found on the Nikon forum and it also works for D60 Digital Camera.
Get a very small cross head screwdriver (watchmaker size)
A can of WD40
Sticky tape
A good light

Remove the Battery and SD card
Open up the bottom of the D40x putting the small screws onto the sticky tape in order of removal.

You know the camera well, so you know where all the screws go.
Remove the metal plate (used for the tripod mount, you will need to remove the back of the D40x as well, it's only 2 screws)

Now look at John C Ayr's pic of the D40xwww.flickr.com/photos/johncayr/3969534234/

Spray a SMALL amount of WD40 onto the red and white gear wheels.
(Don't use so much that it drips down onto the optics, you don't want oil in there!!!)

Put the battery in and hold it down to make contact, put in the sd card and switch on the camera and try the shutter button. (switch it to manual focus or it might try hunting around for ages for focus)

It might start working, if not move the red wheel a few stops and try again.

Once it's lubed up and the wheels move it should be ok.
Keep taking pics until you feel it is ok.

Then reassemble following the screws backwards on the sticky tape.

Mar 23, 2011 | Nikon D60 Digital Camera with 18-55mm lens

1 Answer

Picture ok through viewfinder but after picture has been taken horizontal bars appear on screen and final picture


CCD FAILURE !

just call FUJI in ur area they will do it free of charge even if u are out of warranty dont worry it is a known problem thousands are facing these days just call them and everything will be ok PLS RATE ME FIXYA for help

for support www.fujifilm.com

see this
http://www.imaging-resource.com/badccds.html

Apr 14, 2009 | Fujitsu Cameras

1 Answer

Front case has a dent in ,below the shutter ,? pictures dont seem as good, is it a simple task to remove front of casing to remove dent , ie 4 screws on rear?(or will it all fall apart)


Disassembling your camera voids the warranty. It may or may not be simple task, depending on your experience working with electronics.

If you can afford another camera and are willing to take the risk of taking it apart, it may be worth the experience.

Apr 10, 2009 | Konica Minolta DiMAGE X Digital Camera

1 Answer

Kodak DX3900 camera can't get power from battery


Remove the batteries and clean the battery contacts inside the camera with a soft cloth (a heavy buildup on the contacts may require cleaning with a fine wire brush, steel wool, or sandpaper). Remove any residue that the cleaning leaves in the camera, and then reinstall the batteries. This clears most power-on problems, but if yours persists, check the Kodak troubleshooting guide at:

http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198

Mar 13, 2009 | Kodak EasyShare DX3900 Zoom Digital Camera

1 Answer

Charger blinks red and does not charge


This maybe a solution. I had the same issue just now. Pulled battery, put back in, placed on dock, and still blinking red. So I removed the camera from the dock, pulled battery, put same old battery back in, placed on the dock and turned the mode switch on right away before it started blinkin red. It seems to be charging now with one bar and has not gone blinking red for 15 minutes.

I was outside with the camera in 10 degree weather taking pics of my dogs but had been inside for 20 minutes before placing it on the doc. I think something may have happened with the charging circuit and turning it on right away with it on the doc may have reset the charging. Try it. Hope it works for you.

Oct 23, 2008 | Kodak EasyShare DX6490 Digital Camera

1 Answer

Finepix S5700


This is from Fuji when I emailed them with the same problem.

Is their a yellow question mark, red cross or similar next to finepix ptp camera in device manager ?
Do you have an all in one scanner/printer or a webcam connected to windows xp pc ?
As it is possible the above may conflict with the camera.

We will temporarily disable your scanner.
Please try the following,
Connect your scanner, switch the scanner on, right click on Computer, left click on Properties, left click on Hardware and left click on Device Manager.
Please left click on the plus sign next to Imaging Devices, your scanner will be listed in this section.
Right click on the scanner, left click on Disable, click on Yes, a red cross will appear next to the scanner and please do not restart pc.
Please switch the scanner off or disconnect, connect the camera and switch on.
In the same Imaging devices section, right click on Finepix ptp camera, left click on uninstall, click on OK, do not restart pc and please switch the camera off.
Please double left click on the finepix viewer program icon on your desktop, please click on the drop down menu, SETTINGS, left click on OPERATION SETTINGS WHEN CAMERA IS CONNECTED.
Please untick AUTOSTART FINEPIX VIEWER WHEN THE CAMERA IS CONNECTED, click on OK and then restart computer.
After your pc has rebooted and you are back to desktop, please switch the camera on.
The Fuji camera will be re-installed, a box should appear in the middle of your screen, click on scanner & camera wizard.
If the box does not appear then please double left click on my computer, right click on the Fuji camera model, left click on Get Pictures and follow the on screen prompts to download the images.

Didn't work for me and I gave in and bought a card reader, but it's worth a shot.


Jul 16, 2008 | Fuji FinePix S5700 Digital Camera

1 Answer

Memory card


Make sure you have saved everything you want from the card on your PC, then format the card (FAT 32) with the card in the card-reader.

Then put the card back in the camera.

Can't guarantee this will work, but it's worth a try.

Feb 04, 2008 | Samsung Digimax A402 Digital Camera

2 Answers

Philips FunCam Digital Camera aka dmvc 300k


I've found the drivers http://www.nodevice.com/driver/DMVC300K_20/get41421.html putting that verifiy code in was a **** but none the less if you need the drivers there here if not then your sol until I happen to be in the middle of making another infer-red camera outta one of these things you can call me Ninja but I'd rather you guys say 'uncle' lol... Orbis Non Sufficit - put another one on the bar-b - your existance depends entirely on how I play the game... ifonlyiwereking@gmail.com

Jun 27, 2007 | Philips FunCam DMVC300K/00 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

98868 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...