Question about Lenovo ThinkPad T61 Notebook

2 Answers

No audio output device installed and the screen goes off when connected to a projector

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

For no Audio output device installed message, go to device manager uninstall the audio driver. Reinstall the audio driver from either Windows update or from the manufacturer's(your Computer or Laptop) Web site.

Posted on Apr 29, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer


Posted on May 01, 2013

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is causing a green hue to the entire screen?

1) Check that the plug is tightened into the device and projector. 2) check the prongs on the plug. Are any bent or missing? If so, get a new cable.

Tip: If you can move up to the next plug level, that could help too. So if you are using RGB, try a DVI cable if your projector takes it and your device outputs it. Other connections include are the Display Port and HDMI. They are on par with DVI, but they can deliver audio. Again that is only if the projector accepts it and sound can be played through the projector.

Aug 25, 2014 | Epsonr PowerLite X9 LCD Projector - HDTV -...

3 Answers

Run the signal from a AKIA DVD Lcd TV to a Projector Screen TV

from the back of the tv player it will connect to the projector on the big screen usig rca leads

Jul 30, 2008 | Akai CFTD2011 20 in. EDTV-Ready LCD...

1 Answer

Connect wii to Avr 1312 Denon

What you would have to do is connect the video output of the wii directly to the video input of the bug projector. Also connect the audio cables to it as well. Then connect an audio cable to the projector's audio out or otherwise labeled as "variable out" then connect the other end of that to the matching input terminal, found often labeled as "audio in" on the receiver's grouping of input selections for TV.
Then, on the projector, select the video mode you connected the wii cables to.

Jun 18, 2012 | Denon AVR 1312

1 Answer

My tx-nr905 recievers output audio goes out when connected to my projector and a dvd player, but its ok with any other output combo; proj/sat or tv/dvd or tv/sat etc..... bought new about 4 yrs ago, has...

Semantics maybe, but sources are INputs. OUTputs are speakers, audio to other devices.

A DVD is always an INPUT.

So what's different? IOW, how are the DVD and Projector (Really? It uses a video OUTput) connected for audio? Have you looked at the manuals? Digital sources must be assigned, for example.

Aug 25, 2011 | Onkyo TX-NR905 Receiver

1 Answer

How to connect tv to projector

connect the TV monitor composite output (yellow rca socket) to the yellow video2 socket on the projector.

connect the TV red and white audio outputs to a stereo to mono adapter and take the single lead from the adapter mono output to the audio in on the projector

Feb 26, 2011 | InFocus LP 600 Multimedia Projector

1 Answer

I have a mitsubishi HC5000BL projector and it has an audio out put on it and they refer to it as a trigger it is and 1/8 inch headphone jack. but it wont work i went through all the settings and turn the...

The trigger has nothing to do with audio and is to activate another device with a 12v signal, for example the screen. If you run the trigger into an audio device you'll probably kill it.

There are NO audio capabilities in this unit.

Page EN-7, EN-11, EN-24


Do not use the signal output from the TRIGGER terminal as a power for other devices.

Do not link the TRIGGER terminal with an audio terminal of other device because that device may

be damaged.

The rated current for the TRIGGER terminal is 200 mA. If you use a current exceeding this rating,

a failure may occur.

For information about electric screens, please contact screen manufacturers.

Dec 31, 2010 | Mitsubishi Audio Players & Recorders

1 Answer

I have an Onkyo TX-SR605 AV receiver that just stopped outputing video to my Panasonic projector. I have connected other devices directly to the projector and video is fine, so the problem is not the...

Goof information. Have you eliminated or proven the Onkyo as a cause by going direct to the projector? Try another Input and/or Output. It's best to know which component is broken and if it's limited to a specific subset of its function.

Settings are also indicated. Run through the video setup again. If it just stopped, what preceded it?

Nov 27, 2009 | Onkyo TX-SR605 Receiver

1 Answer

How do i connect my projector with my tv

A TV is meant as a video display device, not a source. As such, it might have an audio output to run to something like a home theater amplifier, but it would be a truly rare TV that has a video output as well.

What you should do is connect another device such as a VCR that can act as a TV tuner. You can run the VCR's video and audio outputs to the projector, tune in the channel you want to watch with the VCR's tuner, and you're all set. If you're on a digital cable system and have a converter box, you can use the outputs from the converter box instead of bothering with the VCR.

May 26, 2009 | Panasonic Videoprojector PT-LM1E...

1 Answer

Delay/ whitescreen when projecting video from laptop

Connect the external display port on your laptop computer to the projection system, and then turn on the projector. For information about connecting external devices to your laptop, see the documentation for your laptop computer.
Set the display resolution of your laptop computer to match the resolution of the projector system. First, on your laptop, open the Display Properties dialog box by using the Display icon in Control Panel, and click the Settings tab. Then, in Screen resolution area, move the slider to adjust the display resolution of your laptop. If you don't know which setting to choose, try 800 x 600 pixels; this is a common setting for many projector systems. YOURS sounds like 640x840.
If you have audio in your presentation, connect a cable from your laptop's audio output jack to the audio input jack on the projector, and then test the volume by playing a file that contains sound.
Start the Player on your laptop. If you want to only display the Player on the big screen, and not the desktop background, maximize the Player or set it to play your video using the entire screen (full-screen mode).

Jan 08, 2009 | Dell 3300MP Multimedia Projector

2 Answers

Device Name

Laptops with a VGA output on the back shouldn?t need any type of ?device? for the projector to work. If its displaying an image with odd colors I would suspect a problem with the projector or the cable that connects them. The easiest way to determine if it?s the projector/cable or the laptop is try connecting it to another PC or laptop.

Jul 22, 2007 | IBM ThinkPad G40 Notebook

Not finding what you are looking for?
Lenovo ThinkPad T61 Notebook Logo

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides