Question about HP LaserJet 3330 All-In-One Printer

1 Answer

My HP LaserJet 3330 was printing and then accidently sucked up about 10 pages, so I slowly pulled them out before they got stuck somewhere past the intial feed of the paper tray. Once I did this, part of the paper tray, near where it starts to feed into the printer popped up and now I can't get it to stay down to properly feed the paper.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 493 Answers

Hi Mary,

The pick up roller may pop up while you are pulling the paper out.

To replace it back:

- First please download the user manual which I uploaded for you clicking HERE and save it to your PC.

- Open the user manual file named "HP_Laserjet_3300_MFP_User_Manual.pdf" using Adobe Acrobat Reader. (If you dont have you can download and install it clicking the link on it.)

- Open the downloaded user manual then go to page 127 and read the instructions how to change the pickup roller of your printer.


Hope this helps.

ioktay

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My HP Laser Jet 3330 keeps sending pop-ups and PRINTS out a message with the headline: HP LASERJET DIRECTOR: shortcuts and more..This occurs every time I start (boot?) my new Compaq CQ5110F PC with Vista...


Sounds like you have a software or driver conflict. Go to hp.com Support & Drivers and check to make sure you have the correct driver for Vista. Even if you do, try uninstalling and reinstalling the driver.

Also, while at hp, check for the latest Firmware update. Go to the printers menu and scroll to INFORMATION (or REPORTS). Select that sub-menu, then scroll to PRINT CONFIGURATION PAGE. Select thi and print out the page. Look for what is beside Firmware Datecode. If it is older than what is on the hp website, print out the instructions for installing the update.

Apr 30, 2010 | HP LaserJet 3330 All-In-One Printer

1 Answer

Hp laserjet 3330 gears on right side grinding after print


The most common problem with grinding is from compacted toner. Try changing the toner cartridge.

Aug 26, 2009 | Office Equipment & Supplies

1 Answer

After getting error 79 won't print


A solution:
  • Unplug
  • Hold down "*" & "enter/ menu buttons"
  • While holding down both buttons, turn power on
  • Wait until something like "initialize" shows up on the display
  • Let go of buttons
  • Wait until display reads "ready"
  • Unplug for 10 seconds, then plug back in
  • Hope it works for you

Apr 24, 2009 | HP LaserJet 3330 All-In-One Printer

1 Answer

HP Laserjet 3330 printed dark page especially around the middle


Does this happen both when copying and printing?
For printing solution, try another toner cartridge.
If lines continue to appear when copying (primarily through the automatic feeder) then lift the auto feeder, and clean the glass -mainly the narrow piece on the left side.

please rate solution :)

Apr 07, 2009 | HP LaserJet 3330 All-In-One Printer

1 Answer

HP LaserJet 3330 prints a configuration page after each print job


If you scroll through the menu functions to service, you can restore factory defaults. If you use the fax function you'll need to run the AiO assistant again. It may take care of it. I didn't see anything on the config page or the menu structure page that would indicate an option to require a print report after each document.

Mar 23, 2009 | HP LaserJet 3330 All-In-One Printer

1 Answer

HP 3330 Scanner is very slow


PDF files are notoriously slow to print. You might invest in more printer memory.

Jan 16, 2009 | HP LaserJet 3330 All-In-One Printer

2 Answers

HP Laserjet 3330 with Windows Vista


no you cannot print on both sides automatically.you have to give the prints 2 times.at first the paper will print on 1 side then insert the same paper in the printer and give the remaining printout and it will print on the back side of the same paper.as you can do it manually but the automatic printing on both side facility is not in HP Laserjet 3330 printers.

Sep 29, 2008 | HP LaserJet 3330 All-In-One Printer

2 Answers

Mac vs The HP 3330 all in one printer..need help


Hi there ,

I have a HP laserjet 3330 but cant find a CD to install in on my PC , I am trying to download drivers but having so much trouble .
can you help plz?

Jun 27, 2008 | HP LaserJet 3330 All-In-One Printer

Not finding what you are looking for?
HP LaserJet 3330 All-In-One Printer Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...