Question about Lexmark X4270 All-In-One InkJet Printer

2 Answers

Lexmark x4270 all-in-one problem with Windows 7

Installed Lexmark x4270 all-in-one on new computer running Windows 7. Text prints fine, will not print pictures or graphics. Printing hangs up in middle of page.

Posted by on

  • 3 more comments 
  • glhall53 Apr 29, 2010

    I downloaded the Windows 7 64-bit driver from the Lexmark site. I also did online chat with Lexmark when done and they said there was something wrong with my new computer.

  • glhall53 Apr 29, 2010

    I tried printing the Lexmark test page as well as pictures stored on the computer. Printing starts but hangs up in middle of page. I have sent my contact information to the email address listed on the last reply.

  • glhall53 Apr 29, 2010

    Printmaster.tech (Joseph) worked with me to solve the problem. I really appreciate his time and efforts. Great professionalism and even greater customer service qualities. Keep up the good work!

  • Lexmark
    Lexmark May 11, 2010

    What software are you using when printing pictures or graphics? Are you printing from the internet? Have you tried printing pictures/graphics that are stored in your computer?

  • Lexmark
    Lexmark May 11, 2010

    What did you use to install the printer software, the installation cd or the downloaded file? Check if your Windows 7 is running on 32-bit or 64-bit operating system by clicking on the Windows logo Start menu > right click on Computer > Properties.

×

Ad

2 Answers

  • Official Brand Answer
  • 3,344 Answers

I really appreciate your patience. Thank you for choosing Lexmark glhall53!!!

Posted on Apr 29, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 118 Answers

turn on/off, unplug, plug inLexmark x4270 all-in-one problem with Windows 7 - 2_bing.gif, should reset configs.

take all the paper out, put half as much back in.
check the rollers to make sure no paper or particles are stuck preventing paper to finish.

go to applications folder for your computer, dbl click printer icon for make of printer. check settings. print 'test document and clean cartridge heads', this should ensure proper printing formats.

lastly, go to web site of printer model and check site for trouble shooting if this does not work above.
hope this helps and good luck

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Lexmark Z705 Will not Print HELP


Use the Vista driver in Windows 7.
Also, make sure that the Print Spooler service in your computer is running. Try following the steps below:
  1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the print spooler service)
  2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.
  3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)

Try to print a document again to verify that the problem is fixed.

Feb 11, 2012 | Lexmark PhotoJet Z705 InkJet Printer

1 Answer

My Lexmark x4690 all-in-one printer is not printing. It prints if I go through the touch pad menu on the printer and print an alignment page but not if I try to print anything from my computer. Text,...


You may need to uninstall the existing X4690 driver first before installing it's driver for Windows 7. Follow the instructions in this artricle on How to Uninstall Lexmark Printers. Once driver is uninstalled, reboot pc when prompted. Reinstall using the driver for Windows 7 from the Lexmark website at:
- Lexmark X4690 Driver for Windows 7 32-bit - Lexmark X4690 Driver for Windows 7 64-bit
Hope this helps.

Feb 25, 2011 | Lexmark X4690 Wireless InkJet Printer

1 Answer

Trying to install software for x4270 into new machine with Windows 7. Tells me software not available in English. Was previously installed with XP in old machine with no problems. Any ideas?


Uninstall the existing Lexmark X4270 printer driver from your Windows 7 by going the Start menu ? Programs ? Lexmark 4200 Series ? Tools ? Uninstall. Reboot pc when prompted. When pc turns on, check if your Windows 7 is running on 32-bit or 64-bit operating system by going to the Start menu ? right-click on Computer ? click on Properties. Take note of the system type.
Download and install the X4270 driver for Windows 7 using the links below:

Follow the instructions in the software.
Thanks.

Nov 18, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

I Have installed Windows7 and now my Printer won't work


You will need to download the Lexmark X4270 driver for Windows 7. You may need to uninstall the existing printer driver before installing the new one. First, unplug the printer from your computer. Then, instructions on how to properly uninstall the Lexmark driver is available at http://bit.ly/8ZH59T. After rebooting pc, check if your Windows 7 is running on 32-bit or 64-bit by going to the Start menu > right click on Computer > Properties. You can download the Lexmark X4270 driver for Windows 7 at:

Download, execute the file and follow the instructions in the software. Thanks.


Oct 18, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Wireless printer communication unavailable via USB


Hi. Hope you got it working fine now on your Windows 7. If not, go to Start Menu > Devices and Printers > right click on the Lexmark print object > Troubleshoot. Make sure the printer is on and is still connected to the computer via the usb cable.

Mar 12, 2010 | Lexmark Wireless X4850 All-In-One Inkjet...

1 Answer

Lexmark x4650 AIO, will only print first page of multiple pg doc


In this case what i would Request u to do is......... Goto Control Panel goto Printers folder......... There u will see the Lexmark Printer Icon........... Just right click on the Printer Icon and click on Properties......... Now click on Advanced and goto Print Processor......... Change it to Lexmark X1100 and NTEMF 1.0008........ Click on Apply click Ok now try to Print.......... Prints Fine............Issue Resolved........

Feb 01, 2009 | Lexmark X4270 All-In-One InkJet Printer

2 Answers

I HAVE INSTALLED THE LEXMARK 4200 SERIES PROGRAM ON MY COMPUTER THE LEXMARK IS A X4270 MODEL. BUT I AM UNABLE TO PRINT MATERIAL FROM THE COMPUTER TO THE ALL IN ONE LEXMARK OFFLINE OR ONLINE. IS THERE...


START- CONTROL PANEL-PRINTER AND FAXS.
Is it listed there? If not click on ADD A PRINTER, follow the prompts. if that doesn't work , let me know, and we'll try other things. .

Dec 31, 2008 | Lexmark X4270 All-In-One InkJet Printer

2 Answers

Lexmark X4270


i need software vista instead of xp to hook up my 3 in one lexmark x4270

Apr 16, 2008 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Printer prints garbage


Did it ever work on new system or never has. Sound like either a software conflict or similar but most likely it doesn't like new machine specs. Have you made sure no other printer software is accidentally installed. Are specs for new system and printer compatable. Some manufacturers specify their machines specifically do not like certain OS's and specs. Because pc and software tech is going so fsat it is really hard for manufacturers to keep up, just as they run off their new printer, state of the art, microsoft brings out a new OS etc, and voila, a new updateddriver is needed. Have you considered it may be the pc causing the errors, ie the registry (from malware,spyware etc) not allowing proper installation. This can and does happen. Just last week, my friends printer was perfectly fine, she had some spyware and we had to edit the registry as it had corrpted where the printer was installed but also her cd rom drive icon and use were wiped out. Run antispyware virus and registry scans to eliminate these. Also try installing printer off a back up copy of the disc not original, good luck.

Mar 02, 2007 | Lexmark X4270 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X4270 All-In-One InkJet Printer Logo

460 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...