Question about Hitachi 50EX01B 50" Rear Projection Television

1 Answer

I have a hitachi 50ex01ba my convergance board is out, where can i get one?

Posted by on

  • jcon29 May 18, 2010

    where are the STK392-110 resisters?

  • jcon29 May 23, 2010

    my tv must have the wrong numbers on it... my convergance heat sinks have 6 little chips on it.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

Maybe you can repair it by changing 2 STK392-110 et resistor around it ( open or change value ).

Posted on Apr 29, 2010

  • atelier mj
    atelier mj May 19, 2010

    the STK392-110 are two IC solder on convergence board they are mount on aluminum heat sink. The resistors are solder juste in front of the 2 STK 392-110. To change this parts you must be able to unsolder and solder new parts. For the resistors you need a multimeter and know color code on resistor to check them (sometime the resistor change of value, so they must be desolder to be test).

  • atelier mj
    atelier mj May 26, 2010

    look for your chassis number. for 50ex01ba chassis is AP01HS. the 2 convergence ICs are IK04 and IK05. If this is not help, could you take a picture of your board and trouble?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hitachi has a blue and yellow swirl band at the top and bottom of screen


Tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes.Than the tv convergence board is dead.The tv convergence board must be replace 2 STK convergence ICS and some or all of it resistors too.To fix the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Mar 02, 2011 | Hitachi Televison & Video

1 Answer

I have a Hitachi 53UWX10BA tv. The picture colors are off and blurry. I ran magic focus and it showed a 4 on the bottom of the screen


Ur tv have a problems known as a convergence problems,it dead.Tv have corlors R,G,B lines mis alignments,have colors shadows picture or 3D picture look alike?Yes.The tv convergence board is dead.The convergence board must change 2 STK convergence ICS and some or all of it resistors to fix the convergence board to solved the tv convergence picture problems.The shop will cost u like $300-350 for parts and labors.

Feb 28, 2011 | Hitachi Televison & Video

1 Answer

Can a hitachi convergence be fixed without a remote? seems like red is adjustable, but cannot access the blue line with our universal remote


Ur universal remote was able to move - + from the convergence grid wright,it is a good remote.The tv convergence board is dead.The tv convergence board the 2 STK convergence ICS and some or all of it resistors are dead too.These parts must be replaced on the tv convergence board to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Dec 19, 2010 | Hitachi 43FDX01B TV

1 Answer

Red glow in Hitachi 50v500 television


Tv have a problems know as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all it resistors too.These parts must be replaced on the tv convergence board to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 24, 2010 | Hitachi 50V500 50 in. HD-Ready LCD...

1 Answer

We have an 80's hitachi mts 52" tv/ monitor and it has a 3d effect how do we fix this?


Tv have a problem known as convergence problems,it dead.Tv R,G,B colors lines mis alignment,Colors shadows or 3d pictures effect.The tv convergnce board is dead.The tv convergence board,require replacing 2 STK convergnce ICS and some or all it resistors.To solved tv convergence board,to solved tv convergence pictures problems.The shop,will cost u like $300-350 for parts and labors.

Sep 11, 2010 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Hitachi 43F300 convergence


Hello,
Do not replace whole convergence board.Because convergence data stored in old board cannot transfered to your new board.Means in your new board there is no convergence data.Unless you have the service manual and know how to get service menu.

I believe if you have convergence problem one of your IC (STK) is bad along with couple of small
Value resistance.

Dont forgat to Rate!

Good Luck
Dals123

Oct 21, 2008 | Hitachi 43F300 43" Rear Projection...

1 Answer

53 INCH HITACHI RED CONVERGENCE


This is a defect most likely on the convergence board.

You should have the manufacture authorized service people repair the set. You can end up buying a convergence board, and the service manuals, and still have some other faults.

For information and parts, look up the Hitachi home page on the net and go to their support area.

Jerry G.

May 18, 2008 | Hitachi 43FDX01B TV

1 Answer

I have a Hitachi 50EX01BA big screen tv that will not align correctly. Picture is o.k but all the words are double. I tried to fix the alignment but it actually looks worse if the red & blue are put...


the convergence Ics you can get replacement ics at the following link and they will give free instalation instructions with pics so you can do the repair yourself.Heres the link.
http://servicemanuals.vstore.ca/

May 02, 2008 | Televison & Video

2 Answers

Hitachi 53uwx10b


I believe you can order the convergence board replacement for $299 from Part Store, here's a link to it for my 61" Hitachi, which should use the same board:
http://www.partstore.com/Part/Hitachi+Ltd/Hitachi/61SWX12B/Hitachi+Ltd/Hitachi/CS00452R/New.aspx

They offer a 30 day hassle-free return policy, so if for some reason it wouldn't work for you or isn't the right part, all you'd be out is the return shipping, as the initial shipping is free.
I'm in the process of having my board fixed w/the IC/resistor kit and hopefully I don't need a whole new board.  We'll see, but give this a shot, I don't see how you can lose...  -TD

Mar 14, 2008 | Hitachi 53UWX10B 53" Rear Projection...

Not finding what you are looking for?
Hitachi 50EX01B 50" Rear Projection Television Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...