Question about D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310)

1 Answer

D-Link WBR2310 router won't work with Belkin modem

When I connect the Belkin (new) modem directly to my computer I am able to get internet/email access but as soon as I link it to my D-Link WBR2310 router I get a message telling me a network cable is unplugged and I am unable to get the internet connect. Has anyone got any suggestions on how to fix this?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 172 Answers

Hi kinobe. You have to check when you connect your computer to one of the ports on the back of the router you get a light on the front of the router. If you dont get anything on any port (even when you connect the modem to the internet/WAN port - that means that one "transistor" inside of the router it's bad. So you have to open it and fix it (but that's electronic repair and you need to have the proper skills and get the exact transistor). There's a posibility you can still connect to the router wirelessly because that's another circuit in the router but If you dont get signal from the modem to the router it's pointless so you have to replace the router. I hope this helps and don't forget to rate and write positive feedback for our fast - free support today. Thank you :D

Posted on Apr 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My email does not come thru when my computer is connected to the router

did it work before? what did you change on your router? can you change it back?. does it work when you computer is directly connected to your modem?

if you download your email into an email client (outlook, outlook express, other)? you may need to configure the port forwarding on your router to allow the port used for this type of information to come through.

first find out the ports used, (if you use pop3 the port number is 110) but find out what specific ports are being used as per your email client configuration.
now go into your router's configuration page and go to the port forwarding section (under advance configuration) on you router and enable these ports if they are not enabled already enabled. (if your router is in fact blocking this ports this where the blocking happens) unless there's a good reason for you to configure this, do it otherwise leave the advance settings alone.

your router manual can be found here

good luck

Dec 27, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

My new computer cannot detect my d-link wbr-2310 router

If you connect the computer directly to the modem, does it work?
If that works then the modem is working.
Now connect the computer to the router and the modem to the router.
You will need to open the set up page of the router to check the settings of the router.
You can set up the router without the CD also.
It is very easy.
Click Here for step by step instructions about how to set up the router

Dec 09, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

2 Answers

Set up my belkin g router

You may have to configure the belkin router depending on the type of ISP that you have.

Basically, you can do these to configure your router:

1. connect the computer to the numbered port of the router and connect the modem to the internet/WAN port.

2. turn off the modem, router and the computer for 30 seconds

3. turn on the modem first, wait for the lights to stabilize then turn on the router, wait for the lights and lastly turn on the computer.

Sep 04, 2008 | Belkin (F5D7230-4) Router (587009)

3 Answers

No internet connection.

try power cycling... turn off all devices -- modem, router, computer...
turn on modem then wait 2 minutes, turn on router then wait about 2 minutes, then turn on pc...

make sure you have the right connections... modem to router (internet port) then router port to pc...

May 31, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer


Sounds like you need to 'copy' the mac address of the computer it was orginally hooked to before and put it into the router. Some routers have an option to do this in the settings menu of the router with one click.

May 15, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

Not finding what you are looking for?
D-Link RangeBooster G  WBR-2310 Wireless Router (WBR2310) Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides