Question about Panasonic SC-AK330 Shelf System

1 Answer

Only one channel plays audio from MP3 connected player

I have an Insigia 8GB MP3 player. When connected via RCA cables I only get audio from one channel (speaker). I've tried it on several other shelf systems and the same thing. I worked with Best Buy and they had me reset my unit, reload my music and try again. Still the same thing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

What is the connector on the MP3 side. Are you using a small 1/8" stereo plug?
Dan

Posted on Mar 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My right audio channel doesn't work on one of my decks? How do I go about fixing it?


Hi Lawrence,
This is a common problem with failed speaker cables. Try swapping the other speaker to your right channel to see if that will work. If it does than speaker cable on the right is damaged. If the swapped speaker doesn't work as well, you need to check the joints from the RCA jack.

Hope this helps.

Oct 09, 2014 | Denon VGC DN-S3500 DNS 3500 PRO DJ CD MP3...

Tip

How do I connect my iPod to a stereo Kenwood


<p>The superior audio quality thanks to the Kenwood stereo system is as good as any on the market. However, many of Kenwood audio receivers contain no iPod connection port. Even the business hubs of high-end entertainment that interface with the computer via USB cannot provide connectivity to an iPod. But that does not mean you cannot high-quality audio through your stereo Kenwood iPod. <br /> <p><br /> <p>1. Put your Kenwood stereo. Connect devices with the stereo turned on may lead to spikes in volume that can damage the speakers and even your ears. Turn up the stereo, so you can use the set of connectors on the back to see. <br /> <p><br /> <p>2. Connect the end of 3.5 mm 3.5 mm to RCA cable for the headset from your iPod. If you do not have a cable 3.5mm to RCA, you can buy one of the sound equipment stores or electronics stores like Radio Shack. <br /> <p><br /> <p>3. Connect the RCA end to your cable 3.5mm to RCA in an available port on the back of your Kenwood stereo. Put your Kenwood stereo, so you can access the buttons on the front. Turn the sound and select the channel of your iPod is connected. <br /> <p><br /> <p>4. Test the connection. Lower the volume on the Kenwood stereo and start a track playing on your iPod that you can recognize. Turn your volume until you play the iPod through the stereo to listen. If you hear no sound, check the "Monitor CD2/TAPE2" is active, and "Mute" is off <br />

on Aug 09, 2011 | Apple iPod touch

1 Answer

LG blue ray won't play sound from RCA sound bar. HDMI cable is hooked into HDMi slot on TV


the details you provided were very vague, however from my experience when a device is connected to another device via and audio capable hdmi cable, that device renders it audio output to the device its connected to and normally turn off all other audio outputs beside optical- I would assume there is an option in the blue ray player to turn off hdmi audio, which will in turn activate other audio outputs- you may also look for audio out port on your tv, it is ideal to connect the sound bar directly to the tv set audio out ports. To sum this up,
if you plan to use your player via hdmi cable you need to turn off hdmi audio output on the blue ray player and the plug an audio cable from your blue-ray player to your sound bar
you may also as i said connect your sound bar directly to your tv, the issue is most tv sets now a days do not have an audio out port, if you do then everything you play thru your tv will have audio via sound bar
there are several way to go here but unless your sound bar has hdmi av switching capabilities (im sure not) this is one of the most simple--Good Luck.

Jan 29, 2013 | Audio Players & Recorders

1 Answer

How to tune up dvd player


  • Plug the power cable of the Samsung VHS/DVD player into an available power outlet near the television.

Connect a set of RCA audio and video cables to the color-coded outputs on the back of your Samsung VHS/DVD player. The colors of these cables are yellow (video), white (left audio) and red (right audio).

Take the other end of the RCA audio and video cables and connect them to the color-corresponding inputs on your television. When plugging in these cables, look for a label for the input, such as "Video 1" and "Audio 1." This will be important in Step 5.

Turn on the television and the Samsung VHS/DVD player.

Tune your television to the video input channel that you noted in Step 3. If you did not take note, you can also tune through your television's input channels until you find the one displaying the signal from the DVD/VCR player.

Insert a VHS tape or DVD into the Samsung player and press the "Play" button to verify that the unit is functioning properly.

Component Video

Plug the power cable of the Samsung VHS/DVD player into an available power outlet near the television.

Connect a set of component video cables to the color-coded outputs on the back of your Samsung VHS/DVD player. These cables will look similar to composite audio and video cables, but they are instead color-coded as red, blue and green.

Plug the other end of the component video cables into the color-corresponding inputs on your television. Take note of what input number you are plugging the cords into, as it will be useful later.

Connect a set of RCA audio cables to "Audio Out" jacks on your VHS/DVD player, then connect the other ends to your television. These cables are color-coded as red and white and must be plugged into the same input number as the component video cables.

Turn on the television and the Samsung VHS/DVD player.

Tune your television to the component video input channel where you connected the Samsung VHS/DVD player.

Insert a VHS or DVD into the Samsung player and press the "Play" button to verify that the unit is functioning properly.

Jul 10, 2012 | 2005 Toyota Caldina

1 Answer

How to hook up vcr and dvd together ?


|DVD| -> |VCR| -> |TV|

1. Connect your VCR to your TV. (Using Antena cable or RCA cables.)

2. From your DVD player, choose the AUDIO VIDEO OUT. Then, connect that to your VCR's LINE IN jacks.

(*)Your DVD player has 3 jacks coming out. Yellow-video, White- Audio Left and Red- Audio Right.
If you VCR does not have the RED jack. Go to a radio shack and tell on of the sales person taht you need to connect 2 RCA audio outs to 1 RCA audio in. (He/ She will give you a "2RCA Male to 1RCA Female" splitter)

3. Finally, play your DVD, put your VCR channel in TV and most important select the LINE channel in your VCR. (This channal may called as L1, Line,... etc)

You should be seeing the DVD in your TV now.

If you want to play the VCR, just put the casset and play.

Important- The VCR needs to be powered on in order to the DVD signals to go to the TV.

Cheers!!!!

Feb 27, 2009 | TruTech TT1620 DVD Recorder

2 Answers

Proscan tv surround sound hook up


This depends on whether you have digital cable box or not. If you have a Digi Cable Box look for the red/white RCA output and connect this via RCA cable to the Red/White Audio input on your surround.

If just Basic Cable look for a red/white audio output on the back of your televison. connect this to the Red/white in on your surround. Could be called tv in or auxillary.

Jan 28, 2009 | Proscan 26LB30QD 26 in. LCD HDTV

1 Answer

Downloading audio books


connect via cable and transfer

Jan 21, 2009 | RCA OPAL M4001 MP3 Player

1 Answer

Ipod vido out


Using the iPod AV Cable
Step 11Use the Apple iPod AV cable. This plugs into the RCA ports on your TV or VCR. This is by far the easiest method. Step 22Connect the AV cable into your iPod. Plug the small end into the iPod where the earbuds would go. Step 33Connect the red RCA plug. This goes into the right audio input of the television or VCR. The colors should match. Step 44Connect the white RCA plug. This plugs into the left audio input of your TV. Connect the yellow RCA plug. This goes into the video input of your TV. Step 55Begin playing a video on the iPod.

May 27, 2008 | Apple iPod MA446LL/A MP3 Player

1 Answer

Recording from one vhs recorder to another.


Hi,

If your plan is to copy a VHS movie to a blank VHS tape, the connections would require a 3 wire RCA connector/cable. The unit where the original movie will be played will be the player. Connect the yellow video RCA cable to the VIDEO OUT, the red & white to the AUDIO L/R OUT. On the 2nd unit designated as recorder, slip in the blank VHS tape. Connect the other end of the RCA 3 wire cable to yellow VIDEO IN, the red & white to the AUDIO L/R IN. Connect the RF OUT of the 2nd unit (recorder to the ANT IN of a TV set. Set the TV to either Channel 3 or 4 as the case may be.

If the recorder has a manual selector or via remote, pls verify that it is set to Video and not tuner (or channels) input.

Press Record on the recorder (2nd unit), press play on the 1st unit (player). The TV will serve as monitor to your copying progress.

Hope that this be of some help/idea. Pls post back how things turned out or shoould you need additional information.

Good luck and kind regards.

Nov 11, 2007 | Televison & Video

Not finding what you are looking for?
Panasonic SC-AK330 Shelf System Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4943 Answers

kakima

Level 3 Expert

102366 Answers

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...