Question about Sony Playstation 3 (PS3) Console

1 Answer

I had a problem with my router and it had to be reconfigured. When I try to connect to the internet with my playstation it asks for a username (email address) and a password. What password is it referring to? My email address login for comcast?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

This is your plastation network online information you signed up for when you first went online to play video games, shop at there store ect.

If you forgot this information go to this link, and you can get password reset being you forgot it if you know what email you used.

https://store.playstation.com/login.gvm

Posted on Apr 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I want connect my ipod to the internet but i need a password for my broadband router. The password is for 2wire005 but i dont know my password


  • If you have forgotten your LinkSys router password, the easiest thing to do is to reset your router to the factory default settings.

    To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds.

  • 2reset-password-linksys-router-1.2-120x120.jpg

    Once your router is hard reset, you will need to login and reconfigure it again.

    To reconfigure your LinkSys, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router.
    LinkSys Default Password

    On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."

    Once you are past the login screen, you are able to reconfigure the LinkSys router.
    You want to go to the management tab and change the administrator password to something else to keep others from accessing your router.

  • 3

    After changing the administrator password then you will need to enable WEP or WAP security so your nosy neighbors aren't tapping into your wireless network. I am picking up 4 networks with my pc antenna.



    Hope i was helpfull.

  • Mar 12, 2011 | Linksys Wireless-G Broadband Router

    1 Answer

    Need username and password reset


    if you are asking to have the router's UI username and password reset and you dont have an access to the rotuer's UI, the only way is to factory reet your router.. however, remember that by doing this, all devices that are currenlty connected to the Internet and wirelessly to your router will get disconnected. You will have to reconfigure the router, everything on it.

    For factory reset, push the reset button on the back panel of the router for 1 min using a paper clip, then unplug and replug the power adapter.

    Nov 21, 2010 | NetGear WGR614 Wireless Router

    3 Answers

    I can't connect to 192.168.2.1


    The default IP address for this router is 192.168.1.1. If you haven't changed it to 192.168.2.1, give it a try.
    Just my 2 cents... Carlos

    May 23, 2010 | Linksys Wireless-G WRT54G Router

    1 Answer

    When i hookup my netgear wgr614 iget on connectivity. If i run modem direct to computer connect fine how to fix was working fine till last night


    Hi,

    It seems that router need to reconfigure and once you reconfigure router i am sure you would be able to resolved issue.
    Please follow steps to reconfigure router
    1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
    2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
    3. Put http://www.routerlogin.com/basicsetting.htm in address bar.
    4. On the basic setting page scroll to the bottom and click on Apply.
    5. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
    6. Click on lan ip setup under advanced.
    7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
    8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
    9. Power off the dsl modem and the router after making the connections.
    10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
    11. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
    12. Access the router (http://192.168.10.1).
    13. Login to the router (Username = admin Password = Password).
    14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
    15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
    16. Click Apply.
    17. Logout of the router.
    18. Open up another browser window and try to access internet.


    Thanks for using Fixya

    May 13, 2010 | NetGear WGR614 Wireless Router

    2 Answers

    I do not have the Linksys CD to install the program on my pc to edit my router's setting. Where can I safely download the software I need?


    Step 1: If you have forgotten your LinkSys2_bing.gif router password, the easiest thing to do is to reset your router to the factory default settings.
    To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds. Step 2: Once your router is hard reset, you will need to login and reconfigure it again.
    To reconfigure your LinkSys, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router. Note: On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."
    Once you are past the login screen, you are able to reconfigure the LinkSys router. You want to go to the management tab and change the administrator password to something else to keep others from accessing your router. Step 3: After changing the administrator password then you will need to enable WEP or WAP security so your neighbors aren't tapping into your wireless network. :)

    May 10, 2010 | Linksys Wireless-G Broadband Router

    1 Answer

    Strong signal but cannot log on to internet. Also uther wireless works and logs on. also direct wire from modem thru router to computer does not work. if i go directly from modem to computer the compter...


    it seems that you need top reconfigure your router
    following are step to reconfigure router


    RECONFIGURE THE ROUTER:
    1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
    2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
    3. Put http://www.routerlogin.com/basicsetting.htm in address bar.
    4. On the basic setting page scroll to the bottom and click on Apply.
    5. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
    6. Click on lan ip setup under advanced.
    7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
    8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
    9. Power off the dsl modem and the router after making the connections.
    10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
    11. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
    12. Access the router (http://192.168.10.1).
    13. Login to the router (Username = admin Password = Password).
    14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
    15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
    16. Click Apply.
    17. Logout of the router.
    18. Open up another browser window and try to access internet.
    regards,
    prakash

    Feb 10, 2010 | NetGear WGT624 Wireless Router

    1 Answer

    DG834Gv3


    RECONFIGURE THE ROUTER:

    1. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router.
    2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
    3. Put http://www.routerlogin.com/basicsetting.htm or 192.168.0.1 in address bar.
    5. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
    6lick on Setup Wizard and then select country and language then "Yes" and Click "Next" on the detection window.
    7 It should give you a pppoa or pppoe detected"(type the Username & Password of your dsl account infomation which you got from isp)
    8 Click Apply.
    9 Open up another browser window and try to access internet.


    regards
    prakash

    Jan 23, 2010 | NetGear DG834G Router

    1 Answer

    If I reset my router, do I need the CD to reconfigure or change the password


    You don't actually need the CD to reconfigure your router or change the password or anything related to your router. So long as the router is connected to your computer via ethernet cable you can access the browser configuration page of your router.

    1. connect your router to your computer via ethernet cable

    2. If you are using Windows XP
    - click start
    - click run
    - type cmd
    - in the black screen type ipconfig and press enter
    - look for the default gateway (example 192.168.1.1)
    - Open Internet explorer
    - type in the address bar: http://the default gateway (example http://192.168.1.1) then press enter and it'll ask you for the password
    - usually the username is blank and the password is admin or the username is admin and the password is pass or password

    If you are using Windows Vista / Windows 7
    - Click the pearl button
    - Click on start search at the bottom of the pop-up window
    - type cmd (don't press enter yet)
    - right click the black icon on the top of the window after typing cmd
    - click on the run as administrator
    - click on continue if there's a prompt
    - in the black screen type ipconfig and press enter
    - look for the default gateway (example 192.168.1.1)
    - Open Internet explorer
    - type in the address bar: http://the default gateway (example http://192.168.1.1) then press enter and it'll ask you for the password
    - usually the username is blank and the password is admin or the username is admin and the password is pass or password

    After successful accessing the configuration page you can now configure your router freely.

    Jan 11, 2010 | Gateway Wireless-B Router (wbr-100)

    1 Answer

    Reconfigure Linkys G Wireless Router


    1. Make sure that your modem is connected to the WAN port of the router and your computer is connected to one of the 4 ports of the router.
    2. Check the IP address that your computer obtained from the router. To do that, go to control panel>network connections.
    3. Right click on Local Area Connections and click status. Then click support and look for IP address.
    4. The IP address of the computer should be in 192.168.1.x.
    5. Then, access the router's setup page by launching Internet explorer and typing 192.168.1.1.
    6. It will then ask for a username and password. By default there is NO username and the password is admin.
    7. Once you're in setup page, set Internet connection type to PPPoE.
    8. You should have the username and password from ATnT.
    9. Save the settings afterwards and check your Internet connectivity through the router.
    Hope this helps!

    Nov 09, 2008 | Linksys Wireless-G WRT54GS Router...

    1 Answer

    I cannot find the security code for my Linksys system. Is there a way of retrieving it? I noticed that at certain hours of the day - especially at night, the added computer laptop functions with...


    If you have forgotten your LinkSys router password, the easiest thing to do is to reset your router to the factory default settings.
    To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds.
    Once your router is hard reset, you will need to login and reconfigure it again.
    To reconfigure your LinkSys, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router.




    forgot-linksys-router-password.jpg
    Logging in to a LinkSys Router
    LinkSys Default Password On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."
    Once you are past the login screen, you are able to reconfigure the LinkSys router.

    Jul 17, 2008 | Computers & Internet

    Not finding what you are looking for?
    Sony Playstation 3 (PS3) Console Logo

    230 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sony Video Game Consoles & Games Experts

    shaun taylor

    Level 3 Expert

    1525 Answers

    marley mcelhinney

    Level 3 Expert

    490 Answers

    juanmireles1

    Level 2 Expert

    189 Answers

    Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...