Question about Televison & Video

1 Answer

Everything that is supposed to be black is showing

I have a Mitsubishi WD-60737 DLP rear projection HDTV. Everything that is supposed to be black is showing pink. I can see the picture, but everything, especially anything that is supposed to be black, has a pink hue.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 336 Answers

Hi,It sounds like a problem with the color wheel or DMD board. The color wheel is a rotating disc that has a gamma of colors it spins at high rpms.The light of the lamp goes through it to create the colors on your tv.When it starts to go bad you will hear ,humming,buzzing,high pitch noises ,you might also experiment color distortion ,black and white picture. This is how the DMD works: http://electronics.howstuffworks.com/dlp1.htm Basically the light of the lamp goes through a tunnel that carries a color wheel(rotating disc with a gamma of colors that creates the colors on your tv)then the light of the lamp goes through the DMD board which is a chip composed of around 2 million pixels that creates the images and colors.When it starts to fail it will create black bars,pixelation,color distortion or white dots on screens. Here's a video that will help you find where the DMd chip is located : http://www.youtube.com/watch?v=0jr_9A5Xd2Q Have a blessed one!

Posted on Apr 29, 2010

Testimonial: "Thanks for the info and links!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi wd 60737 screen going dark


Kindly adjust brightness/contrast/sharpness settings. If there is no improvement, this might require attention by a qualified service technician.

Jul 12, 2012 | Mitsubishi WD-60737 60 in. HDTV

1 Answer

How do you do a convergence on the wd73286?


Hi,
Mitsubishi WD-73286 is DLP tv that does not have any convergence circuit inside.
Convergence is required in old model rear projection tv that has three basic colors picture tubes to generate color picture that projected on front screen of tv.
DLP tv has light engine to generate picture, it is similar to multimedia projector that throws its picture on wall.
Hope this info will help.
Thanks.

Mar 05, 2011 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Mitsubishi DLP - WD-60737 - 1 year old I have sound but no picture. The lamp is not lighting up. I have already replaced the lamp. After I replaced it, the set worked fine for a couple of hours, but is...


Hi,
This tv has self diagnostic feature that will show last error through front light blinks, there is procedure to activate and read out error code to diagnose problem section of tv to solve its issue so to get tv back in business.
Let me know to proceed.
Thanks.

Mar 03, 2011 | Mitsubishi WD-60737 60 in. HDTV

1 Answer

Dlp picture showing pink and green


Hello sir, good day, your dlp is missing the B (blue) color from the RGB signal, this is caused by the Blue wire open, replace your dlp signal cable.

May 08, 2010 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Our Mitsubishi DLP WD-60737 is only one month old. As of last night there are solid vertical lines running through the entire set. Please help


Call Mitsubishi and find out who is the closest warranty repair service station in your area, they will take care of this for you.

Sep 04, 2009 | Mitsubishi WD-60737 60 in. HDTV

1 Answer

Verticle black lines on mitsubishi dlp tv screen


Press the Menu Key on your remote. If your menu shows clearly on the screen, then there is a problem with your source.

Mar 02, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

WD62825 Mits DLP ~ Lines in picture


the DM board and the FMT board need to be repaired. it is not the 4 caps. it will cost about $250.00 plus shipping. go to
www.tv-techs.com

Nov 21, 2008 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Black Screen with White Randomized Pixels


Bad FMT (Formatter) circuit board. No longer available for purchase from Mitsubishi.

The electrical chassis will need to be sent to Mitsubishi for rebuild.

Wait time: 4-8 weeks
Cost (including labor to uninstall it and reinstall it: $800 +)

Nov 09, 2008 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...